This video reviews how to set up your Sea Eagle Sport Runabout as well as how to quickly break it down for storage and transport. For information CLICK HERE ►sea.gl/SR
Correct, you can inflate it up to 10 psi. However, 3.2 is plenty enough. Thanks for watching. We hope you'll consider subscribing to Sea Eagle Boats RUclips Channel for more informative videos to come!
Inserting the rear of the floor into the transom tabs is important. You can wet the tabs on the inflatable floor with soapy water to make them slide in easier, or you can back the screws on the transom tabs out 1/2 way, install the floor tabs, and retighten the screws. The key is to do with the floor deflated. Thanks for watching. We hope you'll consider subscribing to Sea Eagle Boats RUclips Channel for more informative videos and new product releases to come!
Very stable! LOL, the use of sea legs will always depend on the sea conditions. Thanks for watching! We hope you've subscribed to the Sea Eagle RUclips Channel for more videos!
That because of the inflatable keel. Use of the Aluminum Floorboard Reinforcement Kit corrects that. Also, it's a good practice to deflate the external keel when not on the water. www.seaeagle.com/Accessories/floorboards/floorboard-reinforcement-set
Thank you for showing how to breakdown, fold, roll, and repack the Sea Eagle
Absolutely our pleasure. Thanks for watching! We hope you subscribed to the Sea Eagle Boats RUclips Channel for more informative videos to come!
Good video.. is the the 12 or 14 foot boat… does the 14 have the drop stitch floor option? Thank you
Absolutely - Thanks for watching. We hope you'll consider subscribing to Sea Eagle Boats RUclips Channel for more informative videos to come!
Great video. The boat is heavy though right 110 lbs so you could roll it up into your truck!
Thank you so much for watching!
My 12.6 SR has "hooks" attaching to Fb-1 and Fb-2 in order to lift the angle of the bow of the boat. Is that not the case with this boat?
Correct, those hooks are no longer needed. Thanks for watching!
Is the keel inflated to 3.2 psi like the hull?
Correct, you can inflate it up to 10 psi. However, 3.2 is plenty enough. Thanks for watching. We hope you'll consider subscribing to Sea Eagle Boats RUclips Channel for more informative videos to come!
No way I can get the inflatable floor into those tabs. Should I unscrew them to insert or is it even necessary to have them inside that curve?
Inserting the rear of the floor into the transom tabs is important. You can wet the tabs on the inflatable floor with soapy water to make them slide in easier, or you can back the screws on the transom tabs out 1/2 way, install the floor tabs, and retighten the screws. The key is to do with the floor deflated. Thanks for watching. We hope you'll consider subscribing to Sea Eagle Boats RUclips Channel for more informative videos and new product releases to come!
how stable is the 14 footer? can you stand up and fish without having to use sealegs?
Very stable! LOL, the use of sea legs will always depend on the sea conditions. Thanks for watching! We hope you've subscribed to the Sea Eagle RUclips Channel for more videos!
Didn’t say how much to inflate the rudder?
5-10 psi
The plastic floor in my 14sr bow up in the center
That because of the inflatable keel. Use of the Aluminum Floorboard Reinforcement Kit corrects that. Also, it's a good practice to deflate the external keel when not on the water. www.seaeagle.com/Accessories/floorboards/floorboard-reinforcement-set
@@SeaEagleBoats ok so if I ordered this kit how long would it take for it to arrive? I live in Long Beach CA.
Approximately 1 week@@joshuaprough9786