These are exactly the parts that I first changed on my T-15. I don't want to advertise here, but the T-15 from Tiberius Arms is just the perfect paint ball marker / RAM rifle. I shoot indoor at targets about 15 m away, or on a shooting range (especially for markers) For a year and a half I have had ABSOLUTELY zero problems with this rifle and ONLY fun. It's all SO well thought out and ingeniously functional .. the rifled Lapco barrel and the special First Strike projectiles ..Yes that's REAL fun! But the thing must be treated with respect and caution, as if it were a real weapon .. NEVER aim it at living beings (except in paintball LoL!)
Love the videos keep up the good work and keep doing what you're doing but I recently got into paintball gun and got the tmc but I'm looking for the basics maybe like some attachments or stuff for my setup and don't know if y'all have any videos on that or making a video on it or something either way love the content y'all drop much love❤️
@@zanegib169 I took some double-faced tape, placed it lengthwise down a 0.5" diameter dowel rod and wrapped the sandpaper around it. Then stuck the barrel through the dowel and treated it like a rolling pin on a bench for about an hour 😆 it works pretty well...
They've been discontinued. I managed to buy mine off of a paintball shop in Sweden, but if you want to get one, definitely act quickly because on eBay they sell for absurdly high prices.
I personally use a Smart Parts Freak XL Barrel Kit that's 14 inches and autococker (I believe that's what my barrel kit is called). The only downside to it is that I do have to tighten the barrel mounting screw from time to time because it is rather thin compared to the original T-15 barrel housing, but other than that, it's so dang good. 😊
Two things, one, get the full auto kit if you can (assuming you want one of course) since they're really hard to come by nowadays after they've been discontinued.
Second, I personally run a Feyachi RS-30 red dot sight on my T-15 and it works really well for me, however again, as Alex said in the video, you should do your own research because there are so many options out there.
I just got my T15 and asa shut off from you guys. When you screw the shut off on and the tank, the tank is turned 90 degrees from where it screws on without the shut off. This means the fill gauge is in the way of the stock mount bar and you cannot put the stock on. Solutions?
Just remember guys. This is the guy who told you a couple of years ago that the proper way to store your T15 was to just pull the bolt back to the cocked position, We all With brains stems.. know you're supposed to Remove the spring cap, O-RING, retainer, Spring, bolt, and put them in a bag with lube. store them with the marker You have 123 Spring o-rings and De-tent's Last time I checked 3 was greater than one. Get my point.😂😂😂😂😂😂😂 Perceive with caution lays red flags out here.😂😂😂😂😂😂😂😂😂😂
Also, if nothing that you do makes your FA function work, it's your output pressure. I use a Immortal Air Venom tank that has an 850 PSI regulator on it, and it works perfectly. 😊
That on/off ASA adapter is also a must have if your going to use your marker for self defense Always Ready
*Nemesis barrel for FSR.*
*AmmotechPB Freak barrel for roundball.*
I like my lapco bigshot(?), very solid with FSR and not too hard on roundball if I need to switch midgame
These are exactly the parts that I first changed on my T-15.
I don't want to advertise here, but the T-15 from Tiberius Arms is just the perfect paint ball marker / RAM rifle.
I shoot indoor at targets about 15 m away, or on a shooting range (especially for markers)
For a year and a half I have had ABSOLUTELY zero problems with this rifle and ONLY fun.
It's all SO well thought out and ingeniously functional ..
the rifled Lapco barrel and the special First Strike projectiles ..Yes that's REAL fun!
But the thing must be treated with respect and caution, as if it were a real weapon ..
NEVER aim it at living beings (except in paintball LoL!)
If you are going with the full auto and want it to have the firerate of a true m4 set it to 13.3 bps that equals out to about 800rpm or bpm
Love the videos keep up the good work and keep doing what you're doing but I recently got into paintball gun and got the tmc but I'm looking for the basics maybe like some attachments or stuff for my setup and don't know if y'all have any videos on that or making a video on it or something either way love the content y'all drop much love❤️
make a video on different t15 builds!
Nice bro...I'm going to buy the T-15 Next month....now I know what I must upgrade...shall I get a angle foregrip too??
Dax Miller thanks for the hint..!! 😁😁👍👍
I run a naked rail C clamp FTW
Rockstar had a RIS vert. grip for $6 total (from 25 iirc), picked it up and works wonderfully so far. Bit late I know, but maybe this'll help someone?
@@Bert439 I find the T15's a bit on the short side for me to c clamp comfortably
I am designing a stock to hook up a 10-13 3kcu, 15/4500, 45/4500, 50/4500 tank and fore grip that sits at a 45deg. Might even do a thumbstop.
most vital parts for a t-15 upgraded springs and upgraded pawl release for the v1 mags.
Where do you get the pawl release?
I'm coming to grab one of those asa on off hope Scarborough has stock
More magfed stuff!!!!! TMC stuff hehe
Meh
My field paint sucks so the stock T15 barrel honed with some 1500 grit sandpaper does a really good job...
how did you use the sandpaper?
@@zanegib169 I took some double-faced tape, placed it lengthwise down a 0.5" diameter dowel rod and wrapped the sandpaper around it. Then stuck the barrel through the dowel and treated it like a rolling pin on a bench for about an hour 😆 it works pretty well...
When are the full auto kits going to be available again, thats the last piece to my puzzle.
Just let me know if you got this comment.
They've been discontinued. I managed to buy mine off of a paintball shop in Sweden, but if you want to get one, definitely act quickly because on eBay they sell for absurdly high prices.
Of course my comment gets deleted for some strange reason. :/
@@justalpha9138 I got your coment
@@justalpha9138 thanks for the heads up
Hello I been watching your videos and was about to buy an emf 100. What is the best barrel for this marker? I want both a long and short one
I personally use a Smart Parts Freak XL Barrel Kit that's 14 inches and autococker (I believe that's what my barrel kit is called). The only downside to it is that I do have to tighten the barrel mounting screw from time to time because it is rather thin compared to the original T-15 barrel housing, but other than that, it's so dang good. 😊
Make a video of how to install a fullout on a T15 and tu adjust.....plz
I font know if the T15 comes with one but I would recommend a sling
Slings are a paint tbh; that said, if you do want one, get the sling attachment that goes next to the ASA
Extended takedown pins!
just got mine. Is it okay to leave t15 and FSC magazine fully loaded in storage? Or will this ruin the spring over time
You always want to make sure that your mags aren't wound.
My field is not allowfully automatic paintball markers but I would love to know your recommendation on some scopes for my new t15
Two things, one, get the full auto kit if you can (assuming you want one of course) since they're really hard to come by nowadays after they've been discontinued.
Second, I personally run a Feyachi RS-30 red dot sight on my T-15 and it works really well for me, however again, as Alex said in the video, you should do your own research because there are so many options out there.
Pistol grip swap, Trigger guard swap, Extended magazine release, 13ci 3d printed stock and lastly handguard
I'd just drop the 13/300 and go remote line imo. Trigger guard is a pretty pointless change, I'd put barrel over that.
Other 3 are very solid changes
@@0QualityOverQuantity never had issues with any of my gloves or snagging, would rather spend the money on another part. Ymmv though I suppose
All is fine, but a a DYE BOX ROTOR under my T15 is nice too ;-) And the look in the eyes of DAM players priceless
GREAT Channel though !!
Does Killhouse systems suck?
can you make a things new players say part 4
Does play magfed or speed?
Love video dad
Can you use real gun hand guards for the gun?
Yes. The T15 is specifically designed to accept Milspec handguards
@@markegipto1462 I'm not sure about the 2021 version though, because they completely reworked the barrel sleeve and handguard systems
I just got my T15 and asa shut off from you guys. When you screw the shut off on and the tank, the tank is turned 90 degrees from where it screws on without the shut off. This means the fill gauge is in the way of the stock mount bar and you cannot put the stock on. Solutions?
Advance gunslinger HIT sling
Ammotech Freak adapter :)
Just remember guys. This is the guy who told you a couple of years ago that the proper way to store your T15 was to just pull the bolt back to the cocked position,
We all With brains stems.. know you're supposed to Remove the spring cap, O-RING, retainer, Spring, bolt, and put them in a bag with lube. store them with the marker You have 123 Spring o-rings and De-tent's Last time I checked 3 was greater than one. Get my point.😂😂😂😂😂😂😂 Perceive with caution lays red flags out here.😂😂😂😂😂😂😂😂😂😂
People over shoot because there out of range, scared to advance
First comment
Yo show us blastin shit in your room
& still can't get a full auto kit for my T15 ... f#@king ridiculous.
Fear not! There's now Full Auto Kits for the T-15 made by Legacy Performance! Go get one! 😁
Also, if nothing that you do makes your FA function work, it's your output pressure. I use a Immortal Air Venom tank that has an 850 PSI regulator on it, and it works perfectly. 😊