▼EXPAND FOR LINKS TO THE TOOLS▼ Watch more Cool Tools videos here► ruclips.net/p/PL-gT7JMZFYjdW0383kgJVMj0ocXbLXtpQ *Tools used in this video:* - Diamond-Dek Floor Mats: amzn.to/449ZGUH - Benchmark Black Rule: lddy.no/1g0zo - Benchmark Black Rule METRIC BACK: lddy.no/1g34z - Milescraft Knee Blades: amzn.to/40MRXZQ - AccuBurr Burnisher: lddy.no/1g245 - ISOtunes 20% off (until 5/7/23) on my top picks: bit.ly/Stumpy20_TopPicks - ISOtunes (Use this link for 10% off sitewide any time): bit.ly/3BHYdH7 - Triton 3-1/4 HP Router from Yellowhammer Tools: yellowhammertoolworks.com/products/triton-tra001-3-1-4-hp-dual-mode-precision-plunge-router - Kershaw Knife: amzn.to/3Lei7Pr - Bandsaw Blades: sawblade.com (If you use one of these affiliate links, we may receive a small commission) (Milescraft, Taylor Toolworks, ISOtunes, YellowHammer Toolworks and Sawblade.com are sponsors of Stumpy Nubs Woodworking Journal) ★THIS VIDEO WAS MADE POSSIBLE BY★ Bridge City Tool Works: bridgecitytools.com/ *Please help support us by using the link above for a quick look around!* 0:00 Chapters 1:09 Floor Mats 3:03 Black Rulers 5:13 Knee Blades 6:50 Burnisher 8:41 ISOtunes Discount 10:36 Triton Router 14:14 Pocket Knife
I've had the smaller version of the Triton mounted in my table for over a decade. I have nothing but good things to say about it. When I bought it, I knew that I would also need a router lift, so buying the Triton saved me money.
I'm glad you showcased the Triton. I've had one for years and it's by far the best one I've ever used. As you described I use mine in a table and the features are amazing. Saved a ton on a lift and it's accuracy/ease of use is wonderful. Another great episode of cool tools, Thanks James!!!
I have one in my router table for a couple of years and find it so good I intend to get a second one for heavy duty free hand work, replacing another router.
What about putting down a scaffold board. More work moving the board around and but less getting up and down. May work for reasonably flat flower beds.
@@johnclements6614 Good thought. You are right about the flatness part, and I am on a hilly property. A 4 wheel drive version would be awesome. Clearly, I am trying to find a justification for them!
Thanks, James. I just wish you’d put an Aware product on your list, perhaps instead of AM/FM. I have that knife and love it. One can never go wrong with a Kershaw knife!
About rulers, I agree with you about the overly cluttered markings, and I rarely use anything smaller than 1/16, so I decided to experiment with metric. I got a Fastcap metric measuring tape that I use in tandem with my Imperial tape. I really like metric because the math is so simple. Measuring in millimeters is so simple. Learning correlation between the two systems is kind of slow, but I’m getting there.
You'll get there! I approach from the other side. I'm used to metric, but too many plans (and RUclipsr) are using US units (not imperial, 'cause I guess their gallon's too small). Plus I take most measurements off of other parts / already built components.... So I don't measure that often anyway.
Taytools have some good PEC seconds metric only rules and combos every once in a while. The other problem with metric those darn English units on the other side on most rules I am building a 12M boat and these rules are my go to if I can remember where I set them down 😊
I have this exact router in the UK, wasn't overly expensive and a really impressive tool. Only caveat is it is an absolute beast when running, not ideal for the inexperienced in my opinion.
I've had a Triton TRA001 router for years now, and I seriously can't see why anyone would get a different router. It's powerful, versatile, and reliable! I also love the plunge wheel mechanism, I feel like I have better control than with a traditional plunge mechanism. The dust collection is also quite good!
I've used three Triton routers, two of which are the larger ones. I have the same router in my router cabinet and love it. The 240 volt model was unavailable in NZ for so long that I bought a Bosch 1600CE with plunge and fixed bases. I love the Bosch for handheld work, but the Triton is way better table mounted so I bought the big Triton as soon as they were back in stock. The only point I'll make is about the interlock on the on/off switch when table mounted. It forever seems to confuse the guys at my Menz Shed as they forget to turn it off when changing the bit, and they wonder why it won't lift high enough to lock the spindle. You need to be careful about orientation when table mounting to make sure you can access that switch as well as the lock. It's an outstanding router, and a no brainer for table mounting.
Trevor, I am a recent immigrant to NZ from the US and joined a Menz Shed, we only have the Tool Shed router + table combo. The lack of router options here saddens me, and the cost of power tools here. Are there any NZ based fine woodworking RUclips channels? People dealing with these more limited choices and can provide advice? I found Scott Brown, but he mostly deals with home renovation (but is very entertaining). I will be setting up my own small home shop soon.
I have had one of the triton routers for 10 years. They are brilliant. You also missed the quick attachment for the router table and the replaceable base plates which comes in super handy. Love that router so much.
Your videos are my favorites found on RUclips. Not only does your Stumpy Nubs name make me smile while reminding me to work safely, but your topics are always interesting. Where I live, you can’t build basements so my garage is my shop, as well as storage for bicycles, lawn equipment, folding chairs, etc. Easily cluttered. I recently received a glorious gift from my family: a high quality router table. My garage has to be cleaned to make room, but without a router, I haven’t been motivated. I would like a router lift but at 68 don’t feel I should pay a large sum for one. Your demonstration of the plunge router with the built in lift made me sit up immediately. I now know what to get. I am now off to clean my garage.
Found this channel a while back and this must be one of the best channels for woodworkers. Covering every topic in woodworking in such detail! Im no woodworker but mr Nubs should definately write a few woodworking books! Bless you!
I’ve been watching a lot of channels for a while, and while there are a lot of really good channels out there, this one is definitely the best of the best if you’re really looking to learn and not just watch for entertainment. James is an excellent teacher.
The innovative features of the Triton router are very impressive. I am not in the market for a router as I have many, but when I do feel the itch, I definitely will try this one. As you described each of the innovative features I was shouting "YES". I have wanted almost every one of those features in a router for years! Thanks.
Just received burnishing tool I ordered. You're right - it makes refreshing the edge on my card scrapers a breeze in very short time. Thanks for the recommendation and thanks for your continued wisdom and guidance.
I've had the Triton in a cast iron leaf on my table saw set up for years too. I've always thought it was great and wondered why it's not talked about more. Being a "weekend warrior" I thought maybe it wasn't nice enough for heavier use. It's been great for me!
Pete Kershaw was a customer of my dad's rental yard when I was a kid. I don't have them any more, but the locking knife he was selling at the time was outstanding. This was in the early 80's if I remember correctly.
I mounted my triton into a table straight away, it’s been magnificent. You do need to remember to let the power switch cover slide out before you try to engage the collet lock, but it certainly works well. The only Triton tool I would recommend.
I've had that Triton router permanently mounted to my router table for years. It's the best. It was a great purchase decision. It also like the fact that for it's size, it's relatively quiet. Good call James.
I've used those or very similar mats in the past in my work. Comfortable to stand on? you could sleep on them ! I eventually convinced my wife we should get a domestic type for our kitchen for around the sink and cooking area. She loves the comfort under foot, as do the dogs who find them irresistible. Well worth it on older bones.
I really like the Triton router - I have had mine for 3 years or so, though it is almost permanently mounted in my home-made router table. A superb router.
The Defenders over the ear are great, especially with the optional auxiliary. I ended up sticking with 3M because they were on a big sale, now I wish I waited for your code for ISOTunes!
I have several types of the ISOTunes. The over the ear, wired earbuds, and wireless. They all work great and are so very comfortable. Best investment in hearing protection I think I have ever made!
I have the Free ones and are nice. I want the over the ear ones, but I cannot in good conscience buy anything micro-usb anymore. The Free pair is USB-C and older than the over the ear ones. I do not understand why those aren't also USB-C.
@@andrew40 Confucius say.."When around a woman, it is best to protect your hearing" What ever usb soup you need, just be reminded that is best to keep these charged up because you may need them!
That is a very common practice in home shops. I have never seen or heard of anyone having an issue, especially if you tape the mat down so it is not rubbing on the cord.
I have the 3HP Triton in my table and love it. Although that safety feature of shutting the power switch during bit changes is really annoying if you have it hooked up to a paddle switch. Fortunately there are several videos on RUclips on how to disengage that
I've had a first model TRA1 router from the first couple of production runs for around -25- years now and it still works fine. The first model did not have the through the table adjustment, you just had to reach under and wind the knob. I currently have 6 Triton routers, 2 of each size. Triton was an Australian company when the routers were designed and pretty much everything they made was well designed and built within the limits of available technology (I loved the 18volt drill but it had NiCad batteries). Due to some corporate shenanigans Triton has been resold several times, production has moved to Asia and it seems there have been a few rough spots in the production - there were a few years when the speed control failed after a while, but that seems to have been fixed. They have also added several Asian knockoff tools to the line, some are good like the bench top spindle/belt sander, others are pretty meh like the doweler
I've had a few issues with isotunes, from wind noise to them actually breaking from rain despite being ip67 waterproof. I liked the hearing protection so I'm disappointed they failed while doing something they were intended to do. For a high price at that.
Your legs rest on the floor behind them, so you aren't rolling around. But you may want to use care when you are getting down on the floor with them on.
@@bamsebrumbamsebrumen5403 I realize everyone has a different budget but the Triton router is a really great value. Go look up the prices on a Festool router 😂
I only use tape measures with 1/16th makings all the way to the end. Most have 32nds in the first foot. I can estimate a 32nd mark and it is much much easier to read with 16ths marked. I found that most Craftsman tapes are 16ths but then Menard's stopped carrying them. I found them at Lowe's bought a bunch.
@@NinjaPiParadox Let's see. I need one at each saw because I always leave my tape where I took the measure instead of bringing it with me to the saw. I also need a backup tape at the saw for when I take the saw tape back to the work area. Then, I need a backup for the backups for when I forget to distribute all the tapes to the right spot at the beginning of the project. Plus, about a dozen or so in the truck for when I need to measure something at a new jobsite and all my other tapes are piled up around some random saw somewhere else. So, maybe about fifty or so tapes to get through a normal workday.
@@NinjaPiParadox Well, tape measures are like pencils, there is never one nearby when you need it. While I am working on a project, I have it in my pocket but then I go in the house and sure enough it is in my pocket so it ends up with my wallet and keys in a drawer. Then I go out to the shop and don't have a tape measure. So I like to have a few around. One on my workbench, on my table saw, near my CNC etc. Then I need one on my desk in the house and one in the kitchen drawer, etc, etc. Those are all 16 foot 1/2 inch tapes, then I have couple of 25 foot 3/4 tapes, etc. I don't go through tape measures, I just move them and leave them somewhere to be found later.
I have to whole heartedly agree with the Dimond mats! I've had a couple for 10 years and the one in front of my table saw never moves. It shows no sign of ware. I was lucky enough to be given mine from a closing down business. But I after using them for years now I would spend the money on at least one, more than likely 2. the other one is moved to the router table or jointer if I'm going to be there running parts for more than 10 to 15 mins. Great cool tools.
I'm going to pick up a couple sets of those knee blades for a some of the guys on my crew. They build crates and spend quite a bit of time on their knees nailing 2x4s while on bare concrete with no company supplied padding.
I was just Googling pocket knives last night to replace my current one that just frustrates me at work. That Kershaw Gravel is exactly what I was looking for. Thanks.
I bought a triton router table and router set 20 years ago. The router table’s orange powder coating is worn down to the metal in some places due to constant use. It came with the smaller Triton router which I used for 17 years without a problem. 4 years ago I got a brand new one as you demonstrated. My neighbour whose husband had passed away sold it to me along with a forest of timber in the garage rafters. I fitted it to my router table and was surprised at the power compared to my original router. The safety features (identical on both) that you point out are so handy. If you do not engage the see-through safety switch, you cannot raise the spindle to change the bit. The fine adjustment handle is fine, but I seldom use it. I prefer to sight the precise location of the router bit at table level (on your knees 😀) whilst using the adjustable handle feature that you demonstrate. My “old triton” is now working in a friends triton table which he bought on a buy and sell channel. I am fortunate enough to have many routers (like clamps), but my go-to is my triton, and the bosch in my pantorouter!
I'd point out that it is very easy to very accurately estimate the middle between 1/16 marks on the ruller and that is your odd numbered 1/32. I bought some Iso Tunes because of you. They're great! Thank you!
Hi! You featured one of my favorite tools I've been using a couple years now... the knee pads. I install special audio equipment that involves laying hundreds of feet of flat wire for going under carpet, tile or a special cover. Anyway, imagine a 50 x 100' church and bigger and scootering around on that floor stretching out wire and taping it down. Always wear a good work glove on one hand and work boots. One hand to scooter and the boots because you will quickly take the toes out on ordinary shoes. I never strap them on. You can't walk in them with the scooter boards attached. There's another version that has knee cups set into a single board... sort of looks like a wing. The two piece version I usually use for working around theater seats. Joy to all!!!
I've worked under a couple houses now, where the builder poured a concrete slab for the crawlspace, and it makes it a perfect application for a mechanic's creeper.
I've used the large Diamond Deck mat for a couple of years in my open-to-Aussie-weather tiny workshop at the end of our garage. It's held up exceptionally well & love it. Will be buying another. Looking forward to using both black metric Taylor rulers that I just bought directly from them. The 2400W Triton router is jam-packed with unique/compelling features & a bargain at AU$599. BUT, I'm 72 & with an overly-protective wife so I doubt that she'll consent to me buying one. 😞
@stumpy Thanks for sharing. I too have used Iso Tunes for a while. I truly love that they are an American company and only about 30 min from my house :) in Indiana. Pro tip, instead of having more than one set of bluetooth headphones I use an over the ear version with a pair of 3M ear muffs. This lets me 1) hear enough to be safe, 2) still hear my music and 3) not have to constantly change headphones back and forth. Probably number 3 is the number one reason for this set up. Huge time saver for me at least.
Thanks for helping me justify my impulsive purchase of the 1400W version of that Triton router last week! Mine was on clearance for £150 and was the last one within about 50 miles of all the Toolstation stores and I couldn't resist rushing out to buy it before somebody else beat me to it.
as for rule measurements, i gave up on using fractions after dovetailing bee hive top and bottom boards. i was only able to resolve minute in-discrepancies after switching to metric measurements. the metric system is far more accurate and is the superior rule to follow. i'm sure this comment will cause a riot. love the channel, love the content. keep it up, stumpy!
As a person living in Metric, I can see how this ruler is actually the only real argument I have ever seen to stay with inches. Of course metric is more logical and more exact. But that isn't really the point here. The point is how easy to use it is. The kind of precision you get from metrics i useless in wood working any way. Partly because of wood movement and in my case because nothing has ever turned out exactly as I have planned to the millimeter.
@@lejlej I'm from France, but live in Canada. So my first langage is metric :) But I also use imperial a lot, it depends what I do. For general wood working, precision of 1/8 or 1/4 given with a ruler is enough most of the time ! But when I play with electronic and SMD board,it's a different story .. :) I don't understand when some here write then need a precision up to 1/32 with wood ...
Excellent video SN! I will definitely be looking into those bandsaw blades! If I didn't have so many routers, that Triton would be a great purchase! Thanks for the links! 👍👍
@Stumpy Nubs at 2:49 I was always told by electricians people they say running a cord under a mat or carpet is fairly unsafe due to risk of wearing the insulation around the wire. Your mat is probably better then something that is light and shifts a lot. But In your situation they sell floor wire cover things at the big blue box store. Just food for thought have a good one.
Another good video. I am setting up a new shop and need a router (or two). I am in New Zealand and our choices are more limited for routers, but the Triton is available (only the full size one). How is this to use not in a table mount? I fear it would be too heavy, too prone to tipping. I want to use for dovetail making on a Porter Cable jig. And then edge round overs or beading.
After trying so many different knives, by far my favourite workhorse for the shop is the Cold Steel - Tuff Mini. Perfect fit for the hand, all the blade you practically need, easy to sharpen and dead easy to sharpen. Don't understand why people dont talk about it more. 14:16
Just wondering if you happen to remember offhand if your router base on that Triton is dead flat or not. Seems on some there is a stamped metal ring that’s a bit warped (in addition to the aluminum having issues). Love the videos and hope all is well!
I wish tool manufacturers would pay attention to things like the ruler. If they only consulted with occupational and physical therapists, they would learn how to make tools not only easier to use but more likely to avoid injury. That ruler is a classic example-the more the contrast the easier it is to see marks. After all, many of the woodworkers around are sadly getting a bit older.
Thanks for the info but I would like to point out a few issues with the Triton router. I have been using mine for about 14 years (mostly in a router table with dust collection) and have say the rack and pinion mechanism has been nothing but trouble. It jams often with wood dust, even after a few projects, making height adjustments impossible. I have disassembled the router countless times to clean the complicated gear assembly. I even had to replace the worn gears as they are made of plastic. It evens jams when trying to engage or disengage the rack and pinion to plunge modes. I am a hobbyist so the router has only been moderately used. Recently, the electronic speed adjustment failed so I only have max speed now. I love all the features this router incorporates but these problems have been a deal breaker for me. Perhaps the gears are made of metal now and don't get clogged anymore but it has been a nightmare for me.
Curious what type/brand of vacuum you use for the carpet. ? I have a hoover that clogs from sawdust etc too easily. Regular shop vac attachments dont get the stuff out as well as with the beater bar.
Great video. In regards to sawblade, I have tried ordering from them twice, and both times they sent me the wrong product. Last time it was an issue sending it back.
Another good Cool Tools issue… On the safety side, though, I (and most fire inspectors) would encourage you to NOT run power cords under the mats… foot traffic on the cords accelerates breakdown of the insulation and consequently poses a fire risk. There are mats that include “channels” through which the power cords can be run. Just a suggestion.
▼EXPAND FOR LINKS TO THE TOOLS▼
Watch more Cool Tools videos here► ruclips.net/p/PL-gT7JMZFYjdW0383kgJVMj0ocXbLXtpQ
*Tools used in this video:*
- Diamond-Dek Floor Mats: amzn.to/449ZGUH
- Benchmark Black Rule: lddy.no/1g0zo
- Benchmark Black Rule METRIC BACK: lddy.no/1g34z
- Milescraft Knee Blades: amzn.to/40MRXZQ
- AccuBurr Burnisher: lddy.no/1g245
- ISOtunes 20% off (until 5/7/23) on my top picks: bit.ly/Stumpy20_TopPicks
- ISOtunes (Use this link for 10% off sitewide any time): bit.ly/3BHYdH7
- Triton 3-1/4 HP Router from Yellowhammer Tools: yellowhammertoolworks.com/products/triton-tra001-3-1-4-hp-dual-mode-precision-plunge-router
- Kershaw Knife: amzn.to/3Lei7Pr
- Bandsaw Blades: sawblade.com
(If you use one of these affiliate links, we may receive a small commission)
(Milescraft, Taylor Toolworks, ISOtunes, YellowHammer Toolworks and Sawblade.com are sponsors of Stumpy Nubs Woodworking Journal)
★THIS VIDEO WAS MADE POSSIBLE BY★
Bridge City Tool Works: bridgecitytools.com/
*Please help support us by using the link above for a quick look around!*
0:00 Chapters
1:09 Floor Mats
3:03 Black Rulers
5:13 Knee Blades
6:50 Burnisher
8:41 ISOtunes Discount
10:36 Triton Router
14:14 Pocket Knife
"...and starting up a knee-hockey league!" 😂
Keep on being you! Entertaining, informative, and enjoyable.
A knee hockey league with a Stumpy Nubs team! 😂
I've had the smaller version of the Triton mounted in my table for over a decade. I have nothing but good things to say about it. When I bought it, I knew that I would also need a router lift, so buying the Triton saved me money.
I'm glad you showcased the Triton. I've had one for years and it's by far the best one I've ever used. As you described I use mine in a table and the features are amazing. Saved a ton on a lift and it's accuracy/ease of use is wonderful. Another great episode of cool tools, Thanks James!!!
I concur 👍
How good is changing the bits with just the 1 Spanner.
@@andrewheffernan2961 easy. Have one in my router table.
I have one in my router table for a couple of years and find it so good I intend to get a second one for heavy duty free hand work, replacing another router.
I was always suspect of Triton tools as sort of a knockoff brand. I carry a tool bias for sure. I will look.
If only the rolling knee pads worked in the garden! Great episode and I am still loving the change to the tool wall.😊
What about putting down a scaffold board. More work moving the board around and but less getting up and down. May work for reasonably flat flower beds.
@@johnclements6614 Good thought. You are right about the flatness part, and I am on a hilly property. A 4 wheel drive version would be awesome. Clearly, I am trying to find a justification for them!
If they use standard castor wheel mounts, you could maybe swap out for some larger, more rugged wheels.
A friend who has bad knees loves their little garden wagon with a seat. Can't get deep into the flower beds. But awesome for anywhere a wagon can go.
Another awesome episode of cool tools! Thank you for all that you do for the woodworking community!
New knee pads needed for an upcoming flooring project. Gonna try out these on wheels! Thanks for the timely video Stumpy.
Thanks, James. I just wish you’d put an Aware product on your list, perhaps instead of AM/FM. I have that knife and love it. One can never go wrong with a Kershaw knife!
Thanks for all the tips, James! 😊
Stay safe there with your family! 🖖😊
About rulers, I agree with you about the overly cluttered markings, and I rarely use anything smaller than 1/16, so I decided to experiment with metric. I got a Fastcap metric measuring tape that I use in tandem with my Imperial tape. I really like metric because the math is so simple. Measuring in millimeters is so simple. Learning correlation between the two systems is kind of slow, but I’m getting there.
You'll get there! I approach from the other side. I'm used to metric, but too many plans (and RUclipsr) are using US units (not imperial, 'cause I guess their gallon's too small).
Plus I take most measurements off of other parts / already built components.... So I don't measure that often anyway.
25.4 mm = 1 inch
Taytools have some good PEC seconds metric only rules and combos every once in a while. The other problem with metric those darn English units on the other side on most rules
I am building a 12M boat and these rules are my go to if I can remember where I set them down 😊
Thanks very much, James. That Triton router has some slick engineering. Excellent tips and explanations, as always.
I don't need another router.... But I think I need another router!
Hehe
I have this exact router in the UK, wasn't overly expensive and a really impressive tool. Only caveat is it is an absolute beast when running, not ideal for the inexperienced in my opinion.
That Triton router certainly looks the business. I am close to retirement so may get it as a present for myself when I start drawing my pension.
I've had a Triton TRA001 router for years now, and I seriously can't see why anyone would get a different router. It's powerful, versatile, and reliable! I also love the plunge wheel mechanism, I feel like I have better control than with a traditional plunge mechanism. The dust collection is also quite good!
N+1
I'd really love to see you do a video where you talk about some of your favourite woodworking books-- It looks like you have quite a nice collection!
WHOA I'm on crutches for a couple months and those rolling knee pads look real tempting for playing with the kids.
I've used three Triton routers, two of which are the larger ones. I have the same router in my router cabinet and love it. The 240 volt model was unavailable in NZ for so long that I bought a Bosch 1600CE with plunge and fixed bases. I love the Bosch for handheld work, but the Triton is way better table mounted so I bought the big Triton as soon as they were back in stock. The only point I'll make is about the interlock on the on/off switch when table mounted. It forever seems to confuse the guys at my Menz Shed as they forget to turn it off when changing the bit, and they wonder why it won't lift high enough to lock the spindle. You need to be careful about orientation when table mounting to make sure you can access that switch as well as the lock. It's an outstanding router, and a no brainer for table mounting.
Trevor, I am a recent immigrant to NZ from the US and joined a Menz Shed, we only have the Tool Shed router + table combo. The lack of router options here saddens me, and the cost of power tools here. Are there any NZ based fine woodworking RUclips channels? People dealing with these more limited choices and can provide advice? I found Scott Brown, but he mostly deals with home renovation (but is very entertaining). I will be setting up my own small home shop soon.
I have had one of the triton routers for 10 years. They are brilliant. You also missed the quick attachment for the router table and the replaceable base plates which comes in super handy. Love that router so much.
Ok I really want the wheeled knee pads and card burnisher now!
Your videos are my favorites found on RUclips. Not only does your Stumpy Nubs name make me smile while reminding me to work safely, but your topics are always interesting. Where I live, you can’t build basements so my garage is my shop, as well as storage for bicycles, lawn equipment, folding chairs, etc. Easily cluttered. I recently received a glorious gift from my family: a high quality router table. My garage has to be cleaned to make room, but without a router, I haven’t been motivated. I would like a router lift but at 68 don’t feel I should pay a large sum for one. Your demonstration of the plunge router with the built in lift made me sit up immediately. I now know what to get. I am now off to clean my garage.
Another GREAT video. Thanks, Stay Safe, God Bless.
Found this channel a while back and this must be one of the best channels for woodworkers. Covering every topic in woodworking in such detail! Im no woodworker but mr Nubs should definately write a few woodworking books! Bless you!
I’ve been watching a lot of channels for a while, and while there are a lot of really good channels out there, this one is definitely the best of the best if you’re really looking to learn and not just watch for entertainment. James is an excellent teacher.
The innovative features of the Triton router are very impressive. I am not in the market for a router as I have many, but when I do feel the itch, I definitely will try this one. As you described each of the innovative features I was shouting "YES". I have wanted almost every one of those features in a router for years! Thanks.
The over the ear Defender is AMAZING. They cut outside noise almost 100%.
Great rules. Wonderful video. Thank you for sharing. Everyone stay warm, safe, happy and healthy. From Henrico County Virginia
Just received burnishing tool I ordered. You're right - it makes refreshing the edge on my card scrapers a breeze in very short time. Thanks for the recommendation and thanks for your continued wisdom and guidance.
ANOTHER!! Well done video. I have the router you showcased. It’s freakin sweet.
Good on yuh.
Been thinking about getting the over-ears for a while, today was the day. Thanks!
Knee blades take knee hockey to a whole new level
Another great tool video I’ve missed these glad to see them back
I've had the Triton in a cast iron leaf on my table saw set up for years too. I've always thought it was great and wondered why it's not talked about more. Being a "weekend warrior" I thought maybe it wasn't nice enough for heavier use. It's been great for me!
Thanks James, Have a great day.
Pete Kershaw was a customer of my dad's rental yard when I was a kid. I don't have them any more, but the locking knife he was selling at the time was outstanding. This was in the early 80's if I remember correctly.
Ordered that burnisher. Make sure you got your commission because this is what I needed!!!!!
I mounted my triton into a table straight away, it’s been magnificent. You do need to remember to let the power switch cover slide out before you try to engage the collet lock, but it certainly works well. The only Triton tool I would recommend.
That router blows my mind….literally solves every single annoyance I have with my POS black and decker.
I knew there was a reason I liked you. I live in Iron Mountain. Thank for sharing your experience and knowledge.
I have one of the Tritons in my router table for years. Very nice. I use the 2.5 hp model a lot for upright cuts.
I've had that Triton router permanently mounted to my router table for years. It's the best. It was a great purchase decision. It also like the fact that for it's size, it's relatively quiet. Good call James.
I have had one of those routers in my shop for 5-6 years...brilliant
I would really like to see you test how good the dust collection is on that Triton router. It looks like an impressive machine.
Very efficient! 👍
I've used those or very similar mats in the past in my work. Comfortable to stand on? you could sleep on them ! I eventually convinced my wife we should get a domestic type for our kitchen for around the sink and cooking area. She loves the comfort under foot, as do the dogs who find them irresistible. Well worth it on older bones.
I really like the Triton router - I have had mine for 3 years or so, though it is almost permanently mounted in my home-made router table. A superb router.
I've had my Triton router for a couple of years, and it's been stellar both in and out of a router table.
The Defenders over the ear are great, especially with the optional auxiliary. I ended up sticking with 3M because they were on a big sale, now I wish I waited for your code for ISOTunes!
The knee-wheels are really cool 😎
Thanks James for the great products you shared with us. Stay safe and keep up the good videos. Fred.
I have several types of the ISOTunes. The over the ear, wired earbuds, and wireless. They all work great and are so very comfortable. Best investment in hearing protection I think I have ever made!
I have the Free ones and are nice. I want the over the ear ones, but I cannot in good conscience buy anything micro-usb anymore. The Free pair is USB-C and older than the over the ear ones. I do not understand why those aren't also USB-C.
@@andrew40 Confucius say.."When around a woman, it is best to protect your hearing" What ever usb soup you need, just be reminded that is best to keep these charged up because you may need them!
A pleasure as always. Thanks again.
Great tips as usual. Love the new background.
I especially like the electrical cord under the mat. 😮😂
That is a very common practice in home shops. I have never seen or heard of anyone having an issue, especially if you tape the mat down so it is not rubbing on the cord.
Thanks for the great video James 👍
Thanks. I think I’ll be getting those iso tunes as an upgrade from my current ones.
I'm kinda looking for a new router and the Triton you showed seemed very nice. Price is a little high but with the features it is a bargain!
Some really cool tools.
Those knee pads are awesome 😎
Love that Triton Router 💗
I have the 3HP Triton in my table and love it. Although that safety feature of shutting the power switch during bit changes is really annoying if you have it hooked up to a paddle switch. Fortunately there are several videos on RUclips on how to disengage that
Been using this one for a couple of years. Great router.
I've had a first model TRA1 router from the first couple of production runs for around -25- years now and it still works fine. The first model did not have the through the table adjustment, you just had to reach under and wind the knob. I currently have 6 Triton routers, 2 of each size. Triton was an Australian company when the routers were designed and pretty much everything they made was well designed and built within the limits of available technology (I loved the 18volt drill but it had NiCad batteries). Due to some corporate shenanigans Triton has been resold several times, production has moved to Asia and it seems there have been a few rough spots in the production - there were a few years when the speed control failed after a while, but that seems to have been fixed. They have also added several Asian knockoff tools to the line, some are good like the bench top spindle/belt sander, others are pretty meh like the doweler
Always love the cool tools videos!
I want that router!
I've had a few issues with isotunes, from wind noise to them actually breaking from rain despite being ip67 waterproof. I liked the hearing protection so I'm disappointed they failed while doing something they were intended to do. For a high price at that.
Those knee rollers look clever !
But I wonder if the fact they can roll easily is not a problem sometime.
Maybe a hand brake as an option ? :)
Your legs rest on the floor behind them, so you aren't rolling around. But you may want to use care when you are getting down on the floor with them on.
@@StumpyNubs I was thinking mainly when we install floating floor. It often needs some force applied on the boards.
Anyway, I love the idea.
Great info about the Triton router - gonna have to wait a bit, but that's likely to be my choice. Yes, they all should have those features -
Always wanted that router but it is so expensive😋
@@bamsebrumbamsebrumen5403 I realize everyone has a different budget but the Triton router is a really great value. Go look up the prices on a Festool router 😂
I only use tape measures with 1/16th makings all the way to the end. Most have 32nds in the first foot. I can estimate a 32nd mark and it is much much easier to read with 16ths marked. I found that most Craftsman tapes are 16ths but then Menard's stopped carrying them. I found them at Lowe's bought a bunch.
From a casual observer of other people woodworking, how many tape measures do you need? How do you go through tape measures?
@@NinjaPiParadox Let's see. I need one at each saw because I always leave my tape where I took the measure instead of bringing it with me to the saw. I also need a backup tape at the saw for when I take the saw tape back to the work area. Then, I need a backup for the backups for when I forget to distribute all the tapes to the right spot at the beginning of the project. Plus, about a dozen or so in the truck for when I need to measure something at a new jobsite and all my other tapes are piled up around some random saw somewhere else.
So, maybe about fifty or so tapes to get through a normal workday.
@@NinjaPiParadox Well, tape measures are like pencils, there is never one nearby when you need it. While I am working on a project, I have it in my pocket but then I go in the house and sure enough it is in my pocket so it ends up with my wallet and keys in a drawer. Then I go out to the shop and don't have a tape measure. So I like to have a few around. One on my workbench, on my table saw, near my CNC etc. Then I need one on my desk in the house and one in the kitchen drawer, etc, etc. Those are all 16 foot 1/2 inch tapes, then I have couple of 25 foot 3/4 tapes, etc. I don't go through tape measures, I just move them and leave them somewhere to be found later.
Rulers with Dark Mode. Brilliant.
I have to whole heartedly agree with the Dimond mats! I've had a couple for 10 years and the one in front of my table saw never moves. It shows no sign of ware. I was lucky enough to be given mine from a closing down business. But I after using them for years now I would spend the money on at least one, more than likely 2. the other one is moved to the router table or jointer if I'm going to be there running parts for more than 10 to 15 mins. Great cool tools.
I'm going to pick up a couple sets of those knee blades for a some of the guys on my crew. They build crates and spend quite a bit of time on their knees nailing 2x4s while on bare concrete with no company supplied padding.
I was just Googling pocket knives last night to replace my current one that just frustrates me at work. That Kershaw Gravel is exactly what I was looking for. Thanks.
Try the Gerber Fastball too. Awesome EDC.
I bought a triton router table and router set 20 years ago. The router table’s orange powder coating is worn down to the metal in some places due to constant use. It came with the smaller Triton router which I used for 17 years without a problem. 4 years ago I got a brand new one as you demonstrated. My neighbour whose husband had passed away sold it to me along with a forest of timber in the garage rafters. I fitted it to my router table and was surprised at the power compared to my original router. The safety features (identical on both) that you point out are so handy. If you do not engage the see-through safety switch, you cannot raise the spindle to change the bit. The fine adjustment handle is fine, but I seldom use it. I prefer to sight the precise location of the router bit at table level (on your knees 😀) whilst using the adjustable handle feature that you demonstrate. My “old triton” is now working in a friends triton table which he bought on a buy and sell channel. I am fortunate enough to have many routers (like clamps), but my go-to is my triton, and the bosch in my pantorouter!
Another great cool tool video. I aspire to the day I can afford them all.
I'd point out that it is very easy to very accurately estimate the middle between 1/16 marks on the ruller and that is your odd numbered 1/32.
I bought some Iso Tunes because of you. They're great! Thank you!
Hi! You featured one of my favorite tools I've been using a couple years now... the knee pads. I install special audio equipment that involves laying hundreds of feet of flat wire for going under carpet, tile or a special cover. Anyway, imagine a 50 x 100' church and bigger and scootering around on that floor stretching out wire and taping it down. Always wear a good work glove on one hand and work boots. One hand to scooter and the boots because you will quickly take the toes out on ordinary shoes. I never strap them on. You can't walk in them with the scooter boards attached. There's another version that has knee cups set into a single board... sort of looks like a wing. The two piece version I usually use for working around theater seats. Joy to all!!!
I've worked under a couple houses now, where the builder poured a concrete slab for the crawlspace, and it makes it a perfect application for a mechanic's creeper.
I've used the large Diamond Deck mat for a couple of years in my open-to-Aussie-weather tiny workshop at the end of our garage. It's held up exceptionally well & love it. Will be buying another.
Looking forward to using both black metric Taylor rulers that I just bought directly from them.
The 2400W Triton router is jam-packed with unique/compelling features & a bargain at AU$599. BUT, I'm 72 & with an overly-protective wife so I doubt that she'll consent to me buying one. 😞
COOL TOOLS!!❤😊
@stumpy
Thanks for sharing. I too have used Iso Tunes for a while. I truly love that they are an American company and only about 30 min from my house :) in Indiana.
Pro tip, instead of having more than one set of bluetooth headphones I use an over the ear version with a pair of 3M ear muffs. This lets me 1) hear enough to be safe, 2) still hear my music and 3) not have to constantly change headphones back and forth. Probably number 3 is the number one reason for this set up. Huge time saver for me at least.
Thanks for helping me justify my impulsive purchase of the 1400W version of that Triton router last week! Mine was on clearance for £150 and was the last one within about 50 miles of all the Toolstation stores and I couldn't resist rushing out to buy it before somebody else beat me to it.
as for rule measurements, i gave up on using fractions after dovetailing bee hive top and bottom boards. i was only able to resolve minute in-discrepancies after switching to metric measurements. the metric system is far more accurate and is the superior rule to follow.
i'm sure this comment will cause a riot.
love the channel, love the content. keep it up, stumpy!
As a person living in Metric, I can see how this ruler is actually the only real argument I have ever seen to stay with inches.
Of course metric is more logical and more exact. But that isn't really the point here. The point is how easy to use it is.
The kind of precision you get from metrics i useless in wood working any way.
Partly because of wood movement and in my case because nothing has ever turned out exactly as I have planned to the millimeter.
Who measures dovetails? Joinery is usually cut to fit by marking one half from the other half of the joint.
@@lejlej I'm from France, but live in Canada.
So my first langage is metric :)
But I also use imperial a lot, it depends what I do. For general wood working, precision of 1/8 or 1/4 given with a ruler is enough most of the time !
But when I play with electronic and SMD board,it's a different story .. :)
I don't understand when some here write then need a precision up to 1/32 with wood ...
@@StumpyNubs The advantage of measuring dovetails is you can make 2 errors instead of just one, for the same price ! :)
I like the backdrop.
Thay router is amazing
And surprisingly affordable too, especially compared to equivalents like the festool
Excellent video SN! I will definitely be looking into those bandsaw blades! If I didn't have so many routers, that Triton would be a great purchase! Thanks for the links! 👍👍
Try the Gerber Fastball. I have a LOT of knives. This one is my EDC. You'll like it if you like the Kershaw.
@Stumpy Nubs at 2:49 I was always told by electricians people they say running a cord under a mat or carpet is fairly unsafe due to risk of wearing the insulation around the wire. Your mat is probably better then something that is light and shifts a lot. But In your situation they sell floor wire cover things at the big blue box store. Just food for thought have a good one.
yeah, the mat's better than nothing, but if there was a channel routered in the mat, it would be better.
Yeah, the firefighter in me was yelling at that. He is usually so conscientious about safety, it kind of surprised me.
Great list James. Thanks for sharing it.
Great to see one of these again!
Another good video. I am setting up a new shop and need a router (or two). I am in New Zealand and our choices are more limited for routers, but the Triton is available (only the full size one). How is this to use not in a table mount? I fear it would be too heavy, too prone to tipping. I want to use for dovetail making on a Porter Cable jig. And then edge round overs or beading.
I'll have to keep this router in mind. my dewalt plunge base kinda sucks
After trying so many different knives, by far my favourite workhorse for the shop is the Cold Steel - Tuff Mini. Perfect fit for the hand, all the blade you practically need, easy to sharpen and dead easy to sharpen.
Don't understand why people dont talk about it more. 14:16
Just wondering if you happen to remember offhand if your router base on that Triton is dead flat or not. Seems on some there is a stamped metal ring that’s a bit warped (in addition to the aluminum having issues).
Love the videos and hope all is well!
I wish tool manufacturers would pay attention to things like the ruler. If they only consulted with occupational and physical therapists, they would learn how to make tools not only easier to use but more likely to avoid injury.
That ruler is a classic example-the more the contrast the easier it is to see marks.
After all, many of the woodworkers around are sadly getting a bit older.
Those rolling kneepads will soon become all the rage with the kids. I'd be tempted to glue half a shoe on the front just to turn some heads 😁
Thanks for the info but I would like to point out a few issues with the Triton router. I have been using mine for about 14 years (mostly in a router table with dust collection) and have say the rack and pinion mechanism has been nothing but trouble. It jams often with wood dust, even after a few projects, making height adjustments impossible. I have disassembled the router countless times to clean the complicated gear assembly. I even had to replace the worn gears as they are made of plastic. It evens jams when trying to engage or disengage the rack and pinion to plunge modes. I am a hobbyist so the router has only been moderately used. Recently, the electronic speed adjustment failed so I only have max speed now. I love all the features this router incorporates but these problems have been a deal breaker for me. Perhaps the gears are made of metal now and don't get clogged anymore but it has been a nightmare for me.
Great points, all. I hate the whole plastic/nylon gears thing. Every time they are used in manufacturing they are the fail point.
Curious what type/brand of vacuum you use for the carpet. ?
I have a hoover that clogs from sawdust etc too easily. Regular shop vac attachments dont get the stuff out as well as with the beater bar.
I have had my Triton router in a table for over eight years: it is a fantastic router. Oh, I bought mine OVER the Porter-Cable.😁
Stumpy's has great info as usual
My wife had a total knee replacement and can't work on the floor without gel knee pads. I'm getting her these!
I’m going to check out that burnisher
Great video. In regards to sawblade, I have tried ordering from them twice, and both times they sent me the wrong product. Last time it was an issue sending it back.
I have that router and it’s amazing! What table are y’all using with it??? I couldn’t tell which table that was in the video.
I don't have mine in a table, but I believe the video showed Matt Cremona's table which is also made by Triton
Nice video
Another good Cool Tools issue… On the safety side, though, I (and most fire inspectors) would encourage you to NOT run power cords under the mats… foot traffic on the cords accelerates breakdown of the insulation and consequently poses a fire risk. There are mats that include “channels” through which the power cords can be run. Just a suggestion.
That surprised me too! He is usually so conscientious about safety matters.
Thanks