Glad everyone is enjoying the build video. Remember to always be safe - for you and others - working with model rockets or anything similar, even if they're small. It's only fun if no one gets hurt.
I took an aerospace engineering class in highschool, and when we made model rockets, I mounted the engine retainer wrong so when the second stage went off it blew the entire assembly out the back instead of blowing the cone off and deploying the parachute. The result was a rocket powered lawn dart that landed 20 feet from the landscaper
One thing I noticed for small-diameter launchers is that the rocket will almost always have a super low and unstable exit velocity. If instead the launcher used a sealed tube and ditched the "recoilless" aspect you could get much better exit velocity and a more stable accurate flight. Or use a booster charge with a counterweight to get the same effect.
left for over 5 months after making yokai watch videos for a few years and makes his come back well known by making an entire rocket launcher. this man is absolutely insane and I love it.
Mate this is the first video I've seen of yours, I expected to see more of the same great content, and I've gotta say, yours absolutely great, and I like the direction you're going
I saw the notification pop up and thought it was a new Puni video. Well, color me surprised! I was NOT expecting a full on rocket launcher. Glad to see you're back with new content man. Keep up the good work! (and maybe add an outro so the video doesn't end abruptly)
I hope the ATF didn't come knocking. This device may or may not meet the definition of a Destructive Device under the National Firearms Act of 1934. The bore diameter of the launcher is over 1/2 inch, and the rocket ignition system is not primitive (but it is technically separate, so it might not meet the definition of "fixed ammunition"). You could argue it is a "black powder cannon", but it is not a replica of anything made before 1898. It does not have a common sporting purpose. Such a device is legal to make and own, provided you fill out and submit ATF Form 1 and wait for the 5 to 200+ days for it to be approved and the tax stamp (paperwork) to arrive in your mailbox.
Launchers arent regulated by the NFA because it doesn't use single piece ammunition and the rocket engines are below the threshold for being explosive. Wild Arms research and development has more info for you
I like how this dudes entire channel is yokai watch (no offense to yokai watch since its one of my favorite shows) and then he waits for a year to come back with a rocket launcher.
I really enjoyed how you did the commentary, even how you admitted that you didn't get it right the first time (but didn't over dramatize the failures like saying; "I only had one more shot to get this right or it was all for nothing" for example). To that end I think the least I can do is leave a like, comment, subscribe and hit the notification icon. Cheers, thanks for the video.
and by adding the ability to give axial rotation to the rocket, we get a more even trajectory during the main part of the flight, which will affect the “accuracy” (well, at least within a meter of the “target”) and the entertainment of the flight: for a rocket rotating along its axis, the exhaust acquires some helicity.
Glad to see you doing what you like to do, in my opinion making a rocket launcher and 3d Modeling is way more entertaining than puni. Super cool rocket and keep up the great videos
Acetone or Butanone are actually great plastic welding agents for any future projects. They have specific plastics and use cases they work better for, but i use acetone to bond bindings for guitar.
I thought I found a Chanel about making stuff so imagine my surprise when I look at the channel and find nothing but Yokai watch! I was so confused because this is very professional and I thought you had to have made videos like this before now 😂
Cool build. I made something similar back when I was abt 12-13. But mine was mostly PVC pipe construction.. I had a handful of model rockets as a kid, most using those same tiny motors you used (about the size of a AAA battery) but I also had 2 Star Wars model rockets that used a larger motor, about wide as a stack of nickels and a little over 2" long. And I had a tube of thin plastic that would fit it perfectly, so I cut a piece down, made a nose cone and some fins and attached the motor, got a PVC tube that it fit inside of nicely, drilled some holes, glued on handles and the rocket starter, ran wires up to the back of the tube to attach to the ignitor, with a rubber band operated safety trigger that dropped 2 pins that rose up a bit in front and behind the rocket to keep it sliding out the tube. After a bit if work getting the rocket weight and balance right it was so amazingly fun and launched far, accurately. I even added a little paintball red dot sight to it. But if it had looked as good as yours did it this build, it would have blown my mind lol. Thats what I pretended it looked like in my imagination rather than just a janky painted pvc pipe.. Still was alot of fun though. And later I made another little brother to it that shot slightly modified small bottle rockets about 3/4" wide and 5" long.. just using the same positioning pins to hold it steady in the tube and a long BBQ lighter that drilled into the tube and glued in to light the fuse. Not quite as long range or anywhere near as accurate, even w rudimentary fins. They just weren't made to shoot horizontally w the weight and balance, without the stick too.. but it made a fun noise and had the satisfying pop about a second after you launched it off... such good times lol.. maybe I should use your files and make me this thing to play around with
Nice build, seems reminiscent of the USMC Mk153 SMAW. I wish you had included a full length shot of the launcher after it was completed, in addition to the b-roll tracking shot.
Whole thing was fun to watch, fairly informational even though I didn't learn anything, but I'm definitely rewatching so maybe I'll actually pick the information up next time.
Dude just made a rocket launcher using only a 3d model designer software, a 3d printer, and a resin printer. The materials are pretty easy to find and you could probably get them at your local home depot, or other hardware stores. If this is possible, we can technically mass-produce these. Imagine if the missile was a tad bit more accurate, the thrust stronger, and the bulb containing a bit of explosives. Imagine what could happen.
I'm gonna guess "model rocket engines would be outlawed" is what could happen. (Also, the rocket launcher can be made using pipes from the hardware store.)
thanks for actually finishing and perfecting your build before releasing a video. I find it incredibly annoying when tinkering channels clickbait me with their failed experiments that never were properly completed.
Just finished watching the vid, it may be different then the usual but it was time fun to watch, I wouldn't mind if you've convert your channel to a building channel. I could understand If you gotten sick of the game for playing it for so long. Puni puni content or not I'll still watch any vid 👍
This is superb, really awesome idea and execution! One thing I would say for the future, if you make another version... use PETG, it has higher temperature resistance and is also chemical resistant. On top of that it's generally stronger too by a large degree. You can get it in all the colours you used!
this is like those flasutie creations but even better. Add some tannerite to those rockets for some extra fun, maybe even a metal liner to create a shaped charge.
I built a RPG for my 1985 school science program I did almost exactly this and stabilized the rockets by adding weight to the nose. I added 4 extra fins. I used a metal coat hanger, a 2x4 and broomstick, hinge, and plastic pvc tube, and clear plastic clip board for a blast shield . It hit the target every time.
i have never seen anyone but you with the same craftsman bit driver as me. have hade it for almost 20 years. love the flip out handle for extra torque.. ... your project is cool also.
literally did something similar, as a kid. It was rather funny as I had a tube of pvc, and couldn't fit the rocket. So I hot glued fins directly onto the rocket engines, not thinking it through fully. I fired the rocket and it went straight because I actually done some research and built proper fins. But it only went straight for about 10 feet, at that point the rockets fins detached and now it was a completely unguided, finless rocket. It promptly made a 180 turn and flew straight at me. Fun times as a kid.
Very cool. V2 deserves internal wiring, an electronic box that is not in the way of your face, and that LED should be viewable when shoulder mounted. I want to bring that thing to a paintball fight! Now we need laser guided rockets.
You can very easily modify this to have the excluded "G" component. Fill the bulb of the rocket with black powder. When the engine gets to the get it pops a bit to deploy the chute. That'd ignite the powder
First off, great video - very enjoyable! I think it would be fun to see a collab with another RUclipsr where you shoot a rocket that does something interesting, like shoots a drone or something? (Meaning a rocket that launches a working/piloted drone) Keep up the great work 💪🏻
Great build and video! :) I'm currently building a mortar launcher (using CO2 as a propellant). The mortar shell design is done and the launcher is in it's design stage.
Glad everyone is enjoying the build video. Remember to always be safe - for you and others - working with model rockets or anything similar, even if they're small. It's only fun if no one gets hurt.
Are you still going to do puni puni videos
Would you mind to upload the stl to printables?
Are you dead?
Robbet are you still going to make Puni videos?
@@infinitechaos405 I don’t think he’s going to make videos
"because I can" the best argument in the world
Absolutely! It's the perfect opposite of "why do you need xyz". I don't need it, I want it, because I can.
its the only
I totally agree
I agree
This man disappeared for 5 months to make a rocket launcher.
Absolute mad lad.
Seriously good to see you are still around.😁
Thanks so much :)
:)
now he's disappearing for 2 years , bet he's making a nuclear warhead
This man really went from mobile gaming to building rockets and peaced out. Definitely a good way to end a channel on a high note.
Not an rpg manufacturer but an enthusiast
The proper name for the Ignition assembly is the breach
most weird ass ending for a yokai watch channel
Now fr😭
Yokai watch is dead pretty much
@@xlbthedemigod5662 no its not
Tbh it’s the best ending, this video was actually so good.
I DIDNT EVEN SEE THAT 😭😭😭
I took an aerospace engineering class in highschool, and when we made model rockets, I mounted the engine retainer wrong so when the second stage went off it blew the entire assembly out the back instead of blowing the cone off and deploying the parachute.
The result was a rocket powered lawn dart that landed 20 feet from the landscaper
"let's check out this person's other 3D printing vide- oh. What the hell are these"
"these videos are even better"
Guys, watch out, when he comes back in a year he's gonna have a tank.
A 3d printed tank!
this is the definition of "I reject your realty and substitute my own"
I found this video and was like oh a new 3D printing guy to watch and I was so surprised by all the yokai watch videos instead 💀
Same
Bro hasn't uploaded in 2 years now either.
One thing I noticed for small-diameter launchers is that the rocket will almost always have a super low and unstable exit velocity. If instead the launcher used a sealed tube and ditched the "recoilless" aspect you could get much better exit velocity and a more stable accurate flight. Or use a booster charge with a counterweight to get the same effect.
your dog is now on an ATF watchlist
you mean hitlist
nope@@DatBoiOrly
This man went from making puni vids to making literally rocket launchers this is truly sciences alright
left for over 5 months after making yokai watch videos for a few years and makes his come back well known by making an entire rocket launcher. this man is absolutely insane and I love it.
we're making it onto the watchlist with this one boys
Only if we add the g to the rp
"we do what we must, because we can"
Bro made puni puni videos, quit and come back just to make a rocket launcher. That is a goat.
im glad i can watch joe Swanson build a rocket engine these days
Mate this is the first video I've seen of yours, I expected to see more of the same great content, and I've gotta say, yours absolutely great, and I like the direction you're going
Not sure what those weird game videos you used to do were... but this was actually kind of cool. You should keep doing stuff like this.
If you weren't on a fbi list you are now
If you put a small ledge on one side of the back edge of each fin to make those rockets spin, they'll fly a lot straighter. Nice job on the launcher!
I saw the notification pop up and thought it was a new Puni video. Well, color me surprised! I was NOT expecting a full on rocket launcher. Glad to see you're back with new content man. Keep up the good work! (and maybe add an outro so the video doesn't end abruptly)
Will do :)
I hope the ATF didn't come knocking. This device may or may not meet the definition of a Destructive Device under the National Firearms Act of 1934. The bore diameter of the launcher is over 1/2 inch, and the rocket ignition system is not primitive (but it is technically separate, so it might not meet the definition of "fixed ammunition"). You could argue it is a "black powder cannon", but it is not a replica of anything made before 1898. It does not have a common sporting purpose.
Such a device is legal to make and own, provided you fill out and submit ATF Form 1 and wait for the 5 to 200+ days for it to be approved and the tax stamp (paperwork) to arrive in your mailbox.
Ok fun police
Launchers arent regulated by the NFA because it doesn't use single piece ammunition and the rocket engines are below the threshold for being explosive. Wild Arms research and development has more info for you
I like how this dudes entire channel is yokai watch (no offense to yokai watch since its one of my favorite shows) and then he waits for a year to come back with a rocket launcher.
This remonds me of the rocket launcher called "Direct Hit" from Team Fortress 2.
I really enjoyed how you did the commentary, even how you admitted that you didn't get it right the first time (but didn't over dramatize the failures like saying; "I only had one more shot to get this right or it was all for nothing" for example). To that end I think the least I can do is leave a like, comment, subscribe and hit the notification icon. Cheers, thanks for the video.
Amazing build, good jokes thrown in, super neat result!
and by adding the ability to give axial rotation to the rocket, we get a more even trajectory during the main part of the flight, which will affect the “accuracy” (well, at least within a meter of the “target”) and the entertainment of the flight: for a rocket rotating along its axis, the exhaust acquires some helicity.
This is a ZZZ rank meta changing soultimate. Good to see you back.
Glad to see you doing what you like to do, in my opinion making a rocket launcher and 3d Modeling is way more entertaining than puni. Super cool rocket and keep up the great videos
Super great to see that you are uploading other stuff, great video and looking forward to more like this!!
ROB WE MISSED YOU
101 likes
Love the new content 🎉
😂
Barely know him already do
And now you are missing him again lol
Acetone or Butanone are actually great plastic welding agents for any future projects. They have specific plastics and use cases they work better for, but i use acetone to bond bindings for guitar.
That rocke shot upward just like the Javelin Missile 😂.
Flew straight, though.
No idea what puni is but this video showed up in my recommended and I'm glad I watched it!
I thought I found a Chanel about making stuff so imagine my surprise when I look at the channel and find nothing but Yokai watch! I was so confused because this is very professional and I thought you had to have made videos like this before now 😂
I hope you make more videos like this and videos of puni too. Good luck Robbett!!!
that was awesome. Showing more of the design process and even the failed attempts would be really good to watch too!
Whoa...very cool! Good to see you back, and with brand new content!!
Glad to be back!
I don't know if your still doing puni, but if I you don't, I love this type of content, so either way, I'll be happy.
Hi i come from a year into the future. Sadly he has not builded a tank. Should we give him one more year?
@@DR-hb6zoperhaps
Love this content just as much as the puni content. Good luck Robbett.
The content whiplash present on this channel is astounding, but the build is more than worth it
Cool build. I made something similar back when I was abt 12-13. But mine was mostly PVC pipe construction.. I had a handful of model rockets as a kid, most using those same tiny motors you used (about the size of a AAA battery) but I also had 2 Star Wars model rockets that used a larger motor, about wide as a stack of nickels and a little over 2" long. And I had a tube of thin plastic that would fit it perfectly, so I cut a piece down, made a nose cone and some fins and attached the motor, got a PVC tube that it fit inside of nicely, drilled some holes, glued on handles and the rocket starter, ran wires up to the back of the tube to attach to the ignitor, with a rubber band operated safety trigger that dropped 2 pins that rose up a bit in front and behind the rocket to keep it sliding out the tube. After a bit if work getting the rocket weight and balance right it was so amazingly fun and launched far, accurately. I even added a little paintball red dot sight to it. But if it had looked as good as yours did it this build, it would have blown my mind lol. Thats what I pretended it looked like in my imagination rather than just a janky painted pvc pipe..
Still was alot of fun though. And later I made another little brother to it that shot slightly modified small bottle rockets about 3/4" wide and 5" long.. just using the same positioning pins to hold it steady in the tube and a long BBQ lighter that drilled into the tube and glued in to light the fuse. Not quite as long range or anywhere near as accurate, even w rudimentary fins. They just weren't made to shoot horizontally w the weight and balance, without the stick too.. but it made a fun noise and had the satisfying pop about a second after you launched it off... such good times lol.. maybe I should use your files and make me this thing to play around with
This video was worth the wait! Great job Robbett, you legend
Nice build, seems reminiscent of the USMC Mk153 SMAW. I wish you had included a full length shot of the launcher after it was completed, in addition to the b-roll tracking shot.
Whole thing was fun to watch, fairly informational even though I didn't learn anything, but I'm definitely rewatching so maybe I'll actually pick the information up next time.
I wonder if that thing could go fast enough to make tannerite explode from a kinetic filled warhead, on impact?
Loving the new style content, hopefully we’ll see more of this and glad to see you back man❤️
Dude just made a rocket launcher using only a 3d model designer software, a 3d printer, and a resin printer. The materials are pretty easy to find and you could probably get them at your local home depot, or other hardware stores. If this is possible, we can technically mass-produce these. Imagine if the missile was a tad bit more accurate, the thrust stronger, and the bulb containing a bit of explosives. Imagine what could happen.
I'm gonna guess "model rocket engines would be outlawed" is what could happen.
(Also, the rocket launcher can be made using pipes from the hardware store.)
this vid was absolutely crazy, earned yourself a new sub
"I want to see that impossible stage yo-kai not befriend me now"
"New video soon" its been a year please come back I loved this
thanks for actually finishing and perfecting your build before releasing a video. I find it incredibly annoying when tinkering channels clickbait me with their failed experiments that never were properly completed.
It's Official.
Robbett Does Indeed Have Hands.
Two of them
@@RobbettOh, good. So there were no major rocket malfunctions.
You should share your files on odyssey.
This video earned you a sub.
Just finished watching the vid, it may be different then the usual but it was time fun to watch, I wouldn't mind if you've convert your channel to a building channel. I could understand If you gotten sick of the game for playing it for so long. Puni puni content or not I'll still watch any vid 👍
This is superb, really awesome idea and execution! One thing I would say for the future, if you make another version... use PETG, it has higher temperature resistance and is also chemical resistant. On top of that it's generally stronger too by a large degree. You can get it in all the colours you used!
I'd use a metal pipe for a barrel liner, personally.
"Ill be back with another video soon"........ good to see that aged like spoiled milk lol
We evading the ATF with this one
this is like those flasutie creations but even better. Add some tannerite to those rockets for some extra fun, maybe even a metal liner to create a shaped charge.
Can you show us how to build a nuke?
Would be really good.
Uhh for a school project ofc.
Welcome back, missed watching your content
Thanks!
I built a RPG for my 1985 school science program I did almost exactly this and stabilized the rockets by adding weight to the nose. I added 4 extra fins. I used a metal coat hanger, a 2x4 and broomstick, hinge, and plastic pvc tube, and clear plastic clip board for a blast shield . It hit the target every time.
The army need to take notes for an affordable shoulder mounted RPG
I know I am
Even if scaled up it would be utterly useless against anything but a very slow unmarred man with haemophilia or brittle bone disease.
Welp
It's called a LAW.
Switch to using Orca Slicer and use its hole calibration for better fitment. Makes printing 10x more fun when stuff goes together the first time.
I like the last 10 seconds - my life! Great project and absolute awesomeness on the snuggly pressfit of all the parts!
I really like your voice man, it's so soothing to listen to.😌
Thank you!
i have never seen anyone but you with the same craftsman bit driver as me. have hade it for almost 20 years. love the flip out handle for extra torque..
... your project is cool also.
Wait, ROBBETT Watch is not a ROBOT??? What an unexpected twist
When you announced your return on twitter I certainly didnt expect this. I'm not complaining though.
I miss this man.
literally did something similar, as a kid. It was rather funny as I had a tube of pvc, and couldn't fit the rocket. So I hot glued fins directly onto the rocket engines, not thinking it through fully. I fired the rocket and it went straight because I actually done some research and built proper fins. But it only went straight for about 10 feet, at that point the rockets fins detached and now it was a completely unguided, finless rocket. It promptly made a 180 turn and flew straight at me. Fun times as a kid.
my computer randomly bsod'ed like: "and now it will make me happy aSADDSSDSSDSDDSSSDSDSDSDSD- *death'd* 1:35
Rotating fins would need a cover to be able to load inside the launch tube (similar to RPG recoilless rifles).
i just love explosives and projectile launchers
especially joreg!
"were going to be just fine". amazing
I am happy that you are back.
My man got gorilla arms- 💀 But nah really, welcome back man. We missed ya
Is this project available to download anywhere ? this looks super cool.
This is the coolest thing I’ve seen this year. 2024 is going strong.
My favourite 3d-printing past-time! 😂
"I'm rob and the ATF isn't gonna like this one" 😂
Imagine how good it would have looked with some sanding and paint
Robbet when he doesn't want to make the 2000th Puni video:
my man whats ur discord, i am a fellow marxist
@@tbuilder_ I did not expect this.
Marxist Boi#4501
@schizogod uh, ok.
Very cool. V2 deserves internal wiring, an electronic box that is not in the way of your face, and that LED should be viewable when shoulder mounted. I want to bring that thing to a paintball fight! Now we need laser guided rockets.
You can very easily modify this to have the excluded "G" component. Fill the bulb of the rocket with black powder. When the engine gets to the get it pops a bit to deploy the chute. That'd ignite the powder
this is absolutely phenominal
where did this guy go? I want more of these
First off, great video - very enjoyable!
I think it would be fun to see a collab with another RUclipsr where you shoot a rocket that does something interesting, like shoots a drone or something? (Meaning a rocket that launches a working/piloted drone)
Keep up the great work 💪🏻
Most loved/hated airsofter in the field
this was helpfull ^^ i whant to design again stuff its been waaay to long and watching you make this was fun hope you make more projects
This looks really good, can’t wait to see what a V2 looks like
dude casually making mortar rounds
I’m new to the channel and I love it! Keep building my man
This is like adopting an orphan,just because you can, doesn't mean that it's a good idea
Great build and video! :) I'm currently building a mortar launcher (using CO2 as a propellant). The mortar shell design is done and the launcher is in it's design stage.
I will Support you man💕