I doubt i will get a response, bc I havent with ANY of these midi zoom videos, BUT.... i don't see the upside in doing this (you can switch patches with the pedal... but you have to push the tiny buttons to switch from patch mode to stomp mode. (Turn effects on/off in patch on stage)
Hi Sir can you show po which is which dun sa mga pins nung mismong switch ikakabit yung ground and yung signal lines, parang sa vid po kasi madaming pin yung switch na gamit nyo. Thanks po
My bad! Nasa end part pala ng video. What type of wires did you use? Ganun ba siya na may nakabalot sa. Lahat ng wires as a whole? I like it kase tidy looking siya at parang isang cable lang
Excellent!
They shouldve retained the pedal function switch on this one right?
diagram would be most helpful. Each switch gets one colour and black goes to each switch?
Thats an inside job..you gonna have to rip it off and make some splices on switch ports of those five stomps.
Hi may i know how your signal chain goes from your guitar to your amp?
I doubt i will get a response, bc I havent with ANY of these midi zoom videos, BUT.... i don't see the upside in doing this (you can switch patches with the pedal... but you have to push the tiny buttons to switch from patch mode to stomp mode. (Turn effects on/off in patch on stage)
anong amp simulation and cab gamit mo sa Clean mo sa 50?
If I may ask po. Is the black wire in the middle of the switch are connected in common? Thanks
Are the switches normally open or closed? Great idea!
Anong klaseng momentary switch po ginamit niyo?
one switch has to always be engaged right?
san po nakakabili ng ganyan na enclosure
Nice
What type of foot switch you've use sir? DPDT Momentary or Latching?
Use Momentary.
May i know where did you buy your case for the controller?
Galing lods,, magkano po pagawa?
ako lang po gumawa nya sir, madali lang naman yan
@@markamores143 ah sig po lods aralin ko n lng po,, tnx😁
@@markamores143 Sir baka pwede po maka hinge ng diagram
Where did you buy the foot switch?
Hi Sir can you show po which is which dun sa mga pins nung mismong switch ikakabit yung ground and yung signal lines, parang sa vid po kasi madaming pin yung switch na gamit nyo. Thanks po
Bro do you have any idea if the zoom G6 is compatible with foot switches? Thank you!
Hi, I'm using analog pedals and g1xfour but why does noise comes from g1xfour if I'm using it?
Use ZNR noise gate
May schematics ka sir or diagram? Saan siya iconnect? Salamat!
meron, di ko lang naisama sa vid, pero as long as nasundan nyo yung pinakita ko sa vid madali na ikonek sa FS un sir...
My bad! Nasa end part pala ng video. What type of wires did you use? Ganun ba siya na may nakabalot sa. Lahat ng wires as a whole? I like it kase tidy looking siya at parang isang cable lang
Tap tempo swich ?
Timer pedal has tap tempo delay option, thanks 😃
I like it
sir pano gumawa ng foot switch?
Nood nyo lang until the end
Galing parang naka midi
ginawa nyo pala yang footswitch. kaya pala wala ako masearch na ganyan :D
Madali lang yan kayang kaya mo na yan sir haha
Diagram sir hehe