Another very good review video. Love the videos you put out. About the dust issue at 12:15, I am wondering if the placement, shape and airspeed of the blowing fan vs the shape size and placement of the vacuum nozzle captures the loose particles generated. The blowing fan may do a good job keeping dust off the coin so that the laser have clear line of sight on the unlasered portion, however, the blowing air if it is too powerful might push the dust beyond the reach of the vacuum airstream thereby blowing dust all over the work room instead which is bad for your lungs. These fine particles stays airbone for a long time. Best is if the laser is contained within a sealed box with vacuum. But in the absence of that, please consider if your pushing fan vs vacuum works well enough and always wear a good N95 mask. All the best for your next review.
Dear Aurora, I wonder if the PCBs (printed circuit boards) can be made using the fiber laser. Would you like to test engraving copper? Thank you so much. Kind Regards, Pavel
Hi huge fan of your channel. thank you so much for making the videos. Can you please make a video on how you add printer profiles to Prusa slicer. I have a couple of large bed slingers - CRM4, Neptune 4 Max, and Kobra 2 ‘max. I have successfully used Cura and Orca, prusa user interface has left me a little confused, I want to move to it because the couple of times I managed to send G Code from Prusa I noticed the amazing print quality I copied your settings from your Neptune 4 Max video, however I was confused as to why you set the max acceleration at 4000 and 8000?
Can you do a direct comparison to the xTool F1 Ultra? It has the same power lasers but engraving on the coins looker better and deeper on the F1 ultra.
From $3k-$4k I'd expect (more like, demand)a larger working area. This is like buying a sports car when you want to haul stuff around. Sure you'll get there faster but you cant put a anything larger than a bathroom sink in the thing and you still need to pick up a bathtub and toilet. Pass.
They claimed to support LightBurn, but it would be much easier to use their software to switch between different lasers, especially if you want to use a fiber laser for engraving and a diode laser for cutting.
Aurora, I don’t want to be a snitch, but while you were away at summer camp, Helios took control over the channel 😅
LOL !!! 🤭
I think this is over priced but your review is always on point. Its easy to make an informed decision .
I love when you use that photo, it’s so freaking cute! 🥰
OK, engraving with depth, 3d engraving, into brass with a laser is AWESOME!
Cons: Cost $3000
Yeah wtf, why? It looks like a coffee machine, has a small build volume, and is wayy overpriced.
Con: named “Laser Pecker”
Pro: named “Laser Pecker”
😂
OH, I hadn't thought of that angle-from-center when cutting!
Can the slider-thing for bigger pieces be used to keep the cut edge square?
With the slider, the left and right sides are straight, but the top and bottom still cut at an angle.
I'm really hoping she gets a review sample of the new Light Dingus 5000. It's supposed to be pretty good.
Just a warning for everyone, the don't laser engrave PU leather, when it burns it releases a very very poisonous gas.
That’s why you’re supposed to vent towards the neighbor you don’t like
Great review. These devices are out of my price range but man ya'll make me want to get into laser cutting at some point.
Funny, Laser Pecker was my nickname in high school.
You misspelled Little.
Well, there's an unfortunate name :) Or maybe my mind is in the gutter.
😂
I thought the same. The name should be changed lol
Sounds like a xxx superhero flick.
Too expensive, insanely overpriced, so it won’t sell. Your review is excellent, you are very knowledgeable and talented, I really enjoy your reviews.
Great review as always. Looks like a good choice for laser engraving small bare metal or anodized aluminum parts. I wish the software supported Linux.
These comments so far are everything I was hoping they'd be for a machine called the Laser Pecker.
I wish it was bigger.
Maybe the room was cold.
Another very good review video. Love the videos you put out.
About the dust issue at 12:15, I am wondering if the placement, shape and airspeed of the blowing fan vs the shape size and placement of the vacuum nozzle captures the loose particles generated. The blowing fan may do a good job keeping dust off the coin so that the laser have clear line of sight on the unlasered portion, however, the blowing air if it is too powerful might push the dust beyond the reach of the vacuum airstream thereby blowing dust all over the work room instead which is bad for your lungs. These fine particles stays airbone for a long time. Best is if the laser is contained within a sealed box with vacuum. But in the absence of that, please consider if your pushing fan vs vacuum works well enough and always wear a good N95 mask.
All the best for your next review.
Dear Aurora, I wonder if the PCBs (printed circuit boards) can be made using the fiber laser. Would you like to test engraving copper? Thank you so much. Kind Regards, Pavel
Aurora, would you like to do MONPORT MOPA fiber laser test review?
Just wanted to let you know that the link to purchase it does not work 😢
Hi huge fan of your channel. thank you so much for making the videos.
Can you please make a video on how you add printer profiles to Prusa slicer.
I have a couple of large bed slingers - CRM4, Neptune 4 Max, and Kobra 2 ‘max. I have successfully used Cura and Orca, prusa user interface has left me a little confused, I want to move to it because the couple of times I managed to send G Code from Prusa I noticed the amazing print quality
I copied your settings from your Neptune 4 Max video, however I was confused as to why you set the max acceleration at 4000 and 8000?
Can you do a direct comparison to the xTool F1 Ultra? It has the same power lasers but engraving on the coins looker better and deeper on the F1 ultra.
Unfortunate name, but seems like a nice engraver with the internal movement over stepper motors
👍🏻👍🏻
Can you hold it up to a surface like a wall and engrave?
Yes, but with the power cable and power supply. You can use the phone app to start the job over WiFi.
$560 for an enclosure?
Can the fiber laser cut clear acrylic?
👍
Why do you have a mushroom on your shirt?! :)
From $3k-$4k I'd expect (more like, demand)a larger working area.
This is like buying a sports car when you want to haul stuff around.
Sure you'll get there faster but you cant put a anything larger than a bathroom sink in the thing and you still need to pick up a bathtub and toilet.
Pass.
they are still tooo expensive....
Why'd they have to put "pecker" in the name? lol
Photosensitive warning, lots of flashing and strobing in this video.
Looks like a very good engraver. However, its is automatically on my don't consider list, as there is no Linux software.
@@riba2233 How does that make me better or smarter then anyone else?
@@riba2233 I'm not smarter or better then anyone else. You're the one who stated I am. Tell me how I am?
@@riba2233 No. I started using Linux because I didn't like windows 8, and I don't like Windows 10 or 11 either.
Her voice seems forced
Can you use Lighburn with it?
They claimed to support LightBurn, but it would be much easier to use their software to switch between different lasers, especially if you want to use a fiber laser for engraving and a diode laser for cutting.