Wilwood Disc Brakes on my 85 Cutlass // MEEMAW

Поделиться
HTML-код
  • Опубликовано: 31 дек 2024

Комментарии • 34

  • @robtrace8777
    @robtrace8777 7 месяцев назад

    Thanks for the video! Building an 84 SS monte Carlo you helped me big time!

  • @swaller4504
    @swaller4504 11 месяцев назад

    Glad I found you. I have the same brake kit for the front of my 83 Malibu, good to see how they install.

  • @Se7enthsonSS
    @Se7enthsonSS Год назад

    I know this is late but I believe the orientation ring goes on the hub before the rotor is placed.

  • @lukedupps3199
    @lukedupps3199 2 года назад +1

    At least you got red for the wheel bearings!

  • @fmcalv1806
    @fmcalv1806 Год назад

    Great Job Dude !

  • @IndianaFr0g
    @IndianaFr0g 2 года назад

    GR8T video Dave!!!!!

  • @JourdenFabrication
    @JourdenFabrication 2 года назад +2

    Great video David loved it! Next up is me welding your exhaust and intake piping

  • @Macnificent78_
    @Macnificent78_ Год назад

    Great video

  • @g-bodydreams2264
    @g-bodydreams2264 Год назад

    did you by chance add the wildwood brake kit? if so how to you connect the front the cable to the wildwood kit since it doesn't have the adjuster rod? thanks. great video!

    • @betterbeaters
      @betterbeaters  Год назад

      I sure did. I tried a few things but what ultimately ended up working for me was a 3/32 clevis.. I had to modify it slightly but it's been working just fine. If I had to do it again I'd just make one out of sheet steel, but link is below if you want to try it.. something like $7.
      a.co/d/bzXLvgV

    • @g-bodydreams2264
      @g-bodydreams2264 Год назад

      @@betterbeaters is there any way you might be able to send a pic/video of the set up from the front cable to the back portion of the cables Im stuck! Appreciate any help you can give.

  • @Macnificent78_
    @Macnificent78_ Год назад

    What size Rims I'm having the same issue I need to find some spare tire that will fit of that rotor

    • @betterbeaters
      @betterbeaters  Год назад +1

      I'm running 15x7 up front and 15x8 for street / 15x10 for strip in the rear.

  • @Macnificent78_
    @Macnificent78_ Год назад

    Quick question im running the same set up on my 78 impala but in the front i get a little rubbing on one side of the of the brake pads but when i add shim i get the rubbing on the opposite side but the rotor spins freely what do you think i should do great video

    • @betterbeaters
      @betterbeaters  Год назад

      Your shims might be too thick. See if you can find some thinner ones.. McMaster Carr has a great selection. If it's only barely rubbing maybe just run with it. They will self clearance pretty fast :)

  • @DC3_Garage
    @DC3_Garage 2 года назад +1

    What's your plan for wheels since the rotors are as big as the factory wheels?

    • @betterbeaters
      @betterbeaters  2 года назад

      I showed the new wheels at some point in the video but I went with 15" Jegs Spikes. Not too flashy and pretty affordable. Was originally going to go with the YearOne 17" SSII replicas but I need a wider rim than what they offer.

  • @derekderekison3241
    @derekderekison3241 Год назад

    Nice video Honestly tho i think you would have been better off doing the 2wd 2000 blazer spindel swap "at least in the front" its a direct bolt on, zero modification required and can be done for 1/4 of the price😅

    • @betterbeaters
      @betterbeaters  Год назад

      I considered Corvette spindles as well but it was easy enough to do this.. I was going Wilwood regardless.. which was going to be expensive no matter how I handled it :)

  • @252_mason_mo
    @252_mason_mo Год назад

    Dope video, did you use the stock master cylinder or a different 1 if so what's the part number?

    • @betterbeaters
      @betterbeaters  Год назад

      Stock master cylinder for now... I might upgrade to Wilwood at some point just for bragging rights but stock is working great.

    • @252_mason_mo
      @252_mason_mo Год назад

      @@betterbeaters ok did you have to modify it any or did all the stock stuff work?

  • @rjyoungin4713
    @rjyoungin4713 Год назад

    I have similar rotors but I bought 2 passenger side rotors do you think it you’ll make a big difference if I installed them anyways?

    • @betterbeaters
      @betterbeaters  Год назад

      These rotors are directional.. there's a little arrow stamped into it that tell you which way it needs to rotate. You may need to swap one out for drivers side.

  • @Macnificent78_
    @Macnificent78_ Год назад

    Was thats the Passenger side you were doing ????

    • @betterbeaters
      @betterbeaters  Год назад

      Yes it was. Both sides the same.. I just had more room for camera and stuff on passenger side.

  • @rojelioochoa918
    @rojelioochoa918 Год назад

    Did you end up using spindle gasket

    • @betterbeaters
      @betterbeaters  Год назад

      I used everything that came with the kit as directed. I'm sorry for the vague answer.. it's been a while since I put these brakes on but I know I just followed their instructions.

  • @joshwatters4258
    @joshwatters4258 2 года назад

    Why is there what looks like a diff rear cover on you Ford 9"?

    • @betterbeaters
      @betterbeaters  2 года назад +1

      That axle is actually an 8.8 out of an Explorer. I had Moser put 9 inch ends on the axle tubes when they built the rear end to make it easier to buy brakes. That was actually their idea. I had never heard of it but I guess it's a pretty common upgrade.

  • @carleynorthcoast1915
    @carleynorthcoast1915 2 года назад +1

    they don't fool around with the parking brake.

  • @grantadan
    @grantadan 2 года назад

    Before you start it please prime the engine 🤣 so many don't do it I got my prime tank tool off of jegs

  • @kevinjones561
    @kevinjones561 4 месяца назад

    all that for nothing like you going to Indy 500 they just street cars