Hello , please I would like your opinion on the noise produced by the A300 ? I am going to be about 3 meters behind the VP , isn’t the noise too unpleasant ? Thank you in advance for your answer .
Any recommendations on a moderately priced projector primarily to be used outside to show sporting events? Also that can penetrate through sunlight since it will be on a patio. Thanks in advance and keep up the great content!
I don't know if this will help much but here are my experiences with gaming on the A300 projector, no ms measurements or anything, just from feel: Forza Horzion 4 (Xbox One X) - No real problems here, all cars handle differently anyway so it's just a matter of adapting to this "slightly different handling" if anything Titanfall 2 (Xbox One X) - You notice the delay and I was playing worse than before, it's not a deal breaker but in this type of game when you're online and every milisecond counts this definitely affects things Call of Duty Black Ops 4 (Xbox One X) - Same as Titanfall 2, however when my friend played it who is much better at COD than I am he was able to prestige quickly and he was able to compensate the lag by being, well, really good at the game Uncharted 4 (PS4) - No real problems for me here, everything is cinematic and less hardcore than an online game so a good time to be had. Nate always had a bit of delay to his jumps and the input lag from the A300 didn't make it that much worse. Gears 5 (Xbox One X) - Characters feel like they're that much slower to respond and a few times I was killed by the opponent because everything contributed to me not being able to respond in time. Over a few matches though I was able to get better and have a good time, but you can still feel it. Mario Kart (Switch) - Again with a racing game didn't have too much problem, just had to get used to timing my jump drifts. Four player multiplayer on a 100" screen is amazing. Super Mario Maker 2 (Switch) - 50/50, on the harder Kaizo based levels you're going to have a bad time. On the more leisurely levels it's pretty ok Street Fighter 5 (PS4) - WOAH! Just don't even try. This one is frustrating as hell and I was never able to get the hang of the delay. Looks fantastic, shame it's damn near unplayable both offline and online with the lag.
On an french website they measured 32ms input lag in 1080p... maybe the pixelshift adds a good amount of ms to it. Could you try that? Maybe even with recording a stopwatch on a mirrored monitor? If thats true, im gonna purchase it too :D
My freind there is different model by xiaomi 1) MI 4k laser projector 2) Fengmi 4k laser projector 3) wemax a300 4k laser projector As per the reviews and comments by others MI 4K vs Fengmi The Fengmi is 15 to 20% better image quality ....etc. And also the reviewers said Fengmi vs wemax a300 Wemax a300 is better than Fengmi 4k for almost 20% We dont know weather wemax a300 is upgrade version of Fengmi or the models is different As you know the Chinese producing same spec with different names and shape Please provide us your reply as your videos is very helpfully and grate Looking forward to hear from you very soon Again nice review I really like it
Maybe I can solve your confusion. These 3 laser projectors are almost same, because it is all from the same manufacturer, just under the different brands. but Wemax A300 is original brand of the manufacturer, its parameter is real and its internal configuration is the best of the three. So that is why wemax A300 is better than others.
Hi😃 100 Inch for 3.4 distance meters, is good enough for watching? it's not huge? it's something that you get used to? since I prepare to swapping my 55inch TV to projector and 100 Inch ALR screen.
damn, damn, damn , about time. let me first watch the video man., i love you. edit: as always great video, good comparison. i guess ill go ahead with MIJIA until new model comes with really high lumens and real 4k instead of pixel shifting. Thank you.
@@ArmadilloGodzilla ok that is kinda a big thing. 4k at 30hz is so 2018 i suspect more documentaries especially will be at 4k 60hz though i doubt movies will go up that high framerate and for 4k games too, if the lag is not too much i hope he can test input lag for both models
I will share you the setup when finish I just recieved the wemax a300 and vividstorm 120 inches also I got mi box s as well am awaiting my furniture it should arrived within the end of this month I will share with you the complete setup wemax a300 + vividstorm 120 inch its awesome
Awesome review ! Thank you so much for sharing. What about gaming? Have you tried them both? Is the input lag that bad? Im about to pull the trigger for one of these. Thanks!
Hello Nexi Tech, your Projector Tests are exzellent. What does you think? I Look for the UST Projector with the Best Blacklevel in Dark scenes. What would you buy?
Great review. I'm not getting one for another year, so who knows what is the best choice and affordable by then. How far away from the wall do you need to be for 120 and 150 inch screens?
Thanks so much for thorough review. I purchased this during black Friday and have now tested it out. I can truly say, the pictures are amazing as well as the terrific sound quality. Extremely happy with my purchase and look forward to watching movies and TV on it😊
Hi. I have a question . MIlja 4k 5000 lms and WEMAX ONE PRO 7000 ANSI Lumens , which one will be brighter picture, i know ,that wemax one pro is only suports full hd, but we do not have to many movies in 4k yet.. Thank you.
Bought the "Fengmi 4K Cinema Laser Projector" after your Mija 4K video and am really dissapointed. My 1080p projector looks less "pixeled" than this "4k" projector. Also it makes a very loud highpitched noise. I hope I will not have any trouble returning it to Banggood
TTBear2 Thanks! Nothing I still have it but I have to move the screen because of the lack of space in my home and I had to protect the screen from my 1 year old son how runs in the living room and grabs pretty much everything every 10 seconds ,:) I had to move the screen to the storage. When we move to the bigger place soon I hope, I'm going to make some nice customTV stand for the screen and for the projector and I will probably make a video about it.
I see is has a choice in one of the menus for 3D Options. I assume this will show 3D content and assuming it requires active shutter glasses. Does it have an RF or IF emitter for syncing the glasses? Or would it project passive 3D? Thanks
Hi I have wemax a300 with Motorized ALR Floor Rising Pull Up Projector Screen XY Screens . it gives really good and sharp pic and brightness is very good . Just wanted your opinion as I watch movie online and have no issue with chines apps . Do I still need Xiaomi box s as you said it is better that TV box handle the processing
My question is how does the color quality compare to say a Samsung QLED TV? I'm assuming it's sharper. But are the colors vibrant? What about compared to LG OLED?
how is your cr-10s performing after over a year of use on the new heated bed upgrade? was there anything you changed to the heated bed after you made the video?
Hi nexi tech, great video. You pretty much inspired me to get this projector. I am more interested in the Xiaomi Miijia 4k projector because of the price. How is the reliability on that projector? Like how often do you use it per a day? and do you still use it over the A300? I've been reading on the xda and avsforums and my biggest fear that it would take too long to startup or the screen would have lines. I would hate dealing with the customer service because it's shipped from China. I am about to pull the trigger very soon as I need to have a bigger screen in my livingroom. Thanks.
oxyzzmoron Thank you very much for kind words my friend! Well, let me tell you that our Milja 4k is ON every single day pretty much all day long as it's our TV replacement sense I brought my 100inch UST screen 5 months ago. My wife and me have a 13 month's old son and baby program(music videos and animated video clips) is playing on the projector from 8h in the morning till 21h every single day and when our son sleeps then my wife take over the projector and watch the "Friends" on the Netflix for the 100th time, up till around 00:00h. So I would say that projector is running at least 16 hours a day for the last 5 months and it doesn't show any signs of wearing down. BTW every month or so I blast the projector air wents with compressed air and you would not believe how much dust it collects inside sense it's running all the time basically. If my calculation are correct projector should live with this kind of abuse for at least 4-5 years which is pretty good actually. If it dies or sometning happens with the projector in the future I will let you know here in the comments, so far no problems :) PS. The Wemax A300 has that glowing power button on the front and my son clicks on that bottom all the time every single time when he see it so it's impossible for us to use the A300 so we stick with the Milja 4K for now :)
@@NexiTech Awesome, thanks for your response. Yeahh I am going to get it by end of the year or early next year. Hopefully there's a deal for it on Black Friday in the US from banggood or gearbest. And yeah, I just don't think the A300 is worth the extra $800. The Miijia looks just as good in my opinion from all your videos.
@@NexiTech Hey Nexi Tech, I just bought the projector and took the your advice and took the risk of purchasing it from Gearbest. It came within a week to the USA. I am going to confirm that your review is very accurate. The projector is awesome! I've been showing my friends and they were complaining that it's super expensive but they need to realize that you're also getting 100"+ screen\Laser UST Projector. I used my PS4 Pro and Apple TV 4K so far and no complaints. The input lag is pretty dramatic from the reviewers because I was playing Call of Duty Modernwarfare, it's really not that bad if you just play for fun and not competitively. However, I need to purchase the 100" screen from Elitescreens Starbright CLR instead of XYScreens because I really don't want to deal with Chinese people. Other than the projector sounding like a turbine, so far so good. I just hope the hardware is kept reliable as some people were complaining in the forums. Thanks for advertising this and I really hope Xiaomi gives you something for this.
Hi, thanks for your videos, how is the 3d performance? I had a problem with the Xiaomi UST 4k, the 3D effect was green, all the blacks were green and the whites pink, and I didn't like that at all, is this using a similar effect?
You welcome mate! I use this 3D glases on both Wemax and Xiaomi UST laser projector - bit.ly/2J8WK2y No issues with the blacks and green I just watched Lego 2 movie in 3D using these glasses but I do found that on some scenes some white objects in background like a white house was looking more pink then white, no idea why. I will try out other 3D movies when I got the time.
Hi, do you have an idea, how to add a microphone? it ask me to pair one with usb, my idea its for kareoke, but no idea wich kind of microphone to buy, also if it would work... thanks for your videos.... :)
Али Магомедов I already answer to that question few times in the comments. Laser UST projectors are not that good for gaming. Input lag is about 92ms regardless of price point and model. I don't know any UST laser projector on the market that has input lag below 40ms.
Thanks! Well that's subjective. I read that some A300 has a higer coil whine where others not that much. I guess it that depends of version/revision of the power supply. My A300 had some coil whine when I sit close to the projector left side and If I move my head in specific angle you can hit that coil whine frequency. Now I don't know how many people will actually sit close like that and experiment with the head angle :)
Click or hold the right bottom on remote and navigate to HDMI 2.0 then click ON. You can do it only when external device is connected to the projector.
Hey man.. can you do an ownership review of the 4K ust projector? I bought mine for a few months now and I have white spots on my xiaomi mijia 4K ust projector screen.. I notice one spot at first but the following week there’s like 8 plus spots in and around the screen.. do you have this issue? Hope you can help us find solutions as many of us who bought this projector have the same problems
Let's say you're using your projector on average about 5 hours a day and you use it literally every single day there is and never miss one, it will die in nearly 11 years.
Well Xiaomi 4k is more budget friendly and they are very similar in terms of picture quality and brightness output but if you are planing to play games from Xbox or PS4 it's might better to choose Wemax a300, according to the some professional testers input lag was lower on Wemax A300 but only on the chinese version while international version had high input lag.
Not at all, picture is smooth in all movies that I ever watched both on my Milja 4k and now on A300. I just check the files info on my resend 4K action movies that I have watched. File sizes average 56Gb Frame rate 23,98fps Data rate 60256kbs File MKV Is there any specific movie scenes that you want me to test it?
@@NexiTech Excellent, thank you ever so much for the info! I was worried due to being native 60hz and not having a native 24hz mode that panning shots with movement (e.g. moving across streets, cities, etc) would have judder. Looks like now all I need to do is decide between the Wemax A300 and the Mijia 4K! Do you have a personal preference between them?
@@BC-do2zp Sorry for late answer my friend! Unfortunately RUclips never send any notification on reply comments and I have to check manually instead. Well to be honest I really did not noticed any noticeable judder on 24fps movies on both Milja 4k or Wemax A300 and I have whole collection of movies. Movies really look amazing on both projectors. If you are worry about it I can record some movie scenes that you like with my Sony A6500 4K camera so that you can check it for yourself. I could not post more movie scenes due to copyright risk. Well if physical power-button, new resigned case, extend flash memory, 8 point keystone.. etc are not of main consider you can easily go with Milja 4k as it's cheaper and you get more value for the money at this moment.
please make a video comparing the consumption of m365 or m365pro in a straight position vs sitting position just a quick video people say that in 25km / h (full trothle) makes a difference of 20-25% test please. test at all speeds (eco(15km/h) drive (20km/h) and sport (25km/h)
What's the latest update and review for the new wemax a300 4k in regards the picture quality it's worth to buy this projector or not Looking forward to hear from you very soon
Latest update? In terms of software or? I'm not sure what you mean by latest update my friend. Well sure it's worth of money they are both great 4k UST laser projectors but I think that right now Xiaomi Milja 4k is better value for the money.
Can i ask how far should you place the projector from the screen, can i place it only 5-10cm from the creen to get 100inch, it sad 30cm but here in my country the seller claim that it only need to be placed 5cm from the wall to get 100 plus inch.
did you try play on it ? Some games like Gear of War or Doom ? I saw that this Projector have 115ms input lag and the same problem for Vava and some people told that this Projector are impossible to use for Gaming... At other way I saw one guy on RUclips who play Geas 5 on VaVa and very Happy with it. Can you confirm Gaming possibility on this projectors and give you opinion about that ? I use 86 inch 4K HDR TV and I'm planning to switch on 150 inch Wemax or Vava
Jan Odenbach already answer to that question few times in the comments. Laser UST projectors are not that good for gaming. Input lag is about 92ms-110ms regardless of price point and model. I don't know any UST laser projector on the market that has input lag below 40ms.
Добрый день Вам. Я так понимаю, Вы русскоговоряший автор, подскажите, пожалуйста есть ли недостатки в качестве картинки в сравнениее с олед тв на ваш взгляд?
@@dannydoyle8731 on white wall in daytime it looks shit, i have ordered 100 inch ust screen ,it will get here within 2 days. ill let you know, when i install screen and do some tests. projector is week old.
How do you deal with 24p contents? The motion judder can be quite jarring and obvious especially for fast moving scenes. Moreover, most content in RUclips, Netflix and other streaming media are often in 24p.
That depends my friend. If you live in county with 50hz electricity you can give projector 24hz input over Blu-ray player and motion is pretty good. If you live in country with 60hz electricity like US then I gues that can be a bit annoying if you have a keen eye.
Oh, My bad! Wrong projector, I thought that you ask about VAVA projector. On VAVA 4k you can switch from 50hz to 60hz in the settings if you want. Yes, you are right, the Wemax is locked on 60fps. Sorry I'm using RUclips studio app on my phone and I just see bunch of comments in the list with tiny thumbnail image and I reply directly.
Hey Nexi, your videos helped me make the decision to buy an A300 projector. However I am having problems accessing the playback settings to activate hdmi 2.0 I am holding down the right button with the three lines but it doesnt come up with the option for this, please can you help?
@@NexiTech thanks man, I now know what I was doing wrong, I was trying to access it from the main hub of the projector and not within the HDMI source. All operating at 4k 60hz now wooo!!!
Peter Bergstrøm I did not order it because i think the technologi is new for this device and its not perfect so i went for a traditional projector model epson tw-9400.
oh,nice video, may i know how is your charge if we put our product video on your youtube or facebook, like A300,XIAOMI, JmGO, XGIMI and our Salange projector?
I believe you should sent to him the said products like salange in order to check the pros and cons as this gentleman he is telling always the truth always and most of the people trust his review
Is there anything stopping me from moving the projector farther back to get a 180" (15 foot) image? It would be in a large, dimly lit room with a good screen.
Hello Nexi Tech, Please I have just received my A300, and I don’t’ find the Resolution screen menu? May I ask you to help and show me where is this menu please ? I checked in Display menu but I didn’t find out.. thank you
I order the 3D glasses which I should receive in one week. As soon I test it with A300 I will let you know in the comment, because right know when I turn on 3D on A300 I feel that I will pass out in like 30 seconds without glasses :D
I owned the first laser projector of Xiaomi and it was stunning good, so it will be minimum as good as that one. I think there are not really big differences. It also depends on your glasses and the quality of the movie file. i used Hi-SHOCK® DLP Pro “Lime Heaven”. And i was really shockes as i started to view sample 3d movies on youtube. Ofcourse those 3d effects wont be in movies but still incredible. In my opinion its way better than Cinema 3d.
hi, i didn't buy the projector yet but I have Philips 3d active glasses, it will good enough or I'll need to buy the fengmi 3d glasses for using on the a300?
Both are pretty much the same. In dead silent room(when all you hear is your wall clock clicking) and when you come very close to the left side of A300 and you place you ear next to the left exhaust grill and move your head in specific angle you can ''catch'' some coil whine, but am not sure how many people will do something like that and honestly i believe that nobody will use this projectors in dead silent room on mute by siting right next to the projector left side while keeping their head on that specific angle. :) For example Me and my wife we have one year old baby and the baby TV program is pretty much all day long playing on the projector every single day sense I got Xiaomi 4K model and now on Wemax A300 and nobody ever heard or be bothered with any coil whine noise including my 1 year young baby boy. P.S. To be honest I have also read on some forums that few owners of Milja and Wemax projectors had received projectors with very high coil whine and as far as I know they send back their projectors and get replacement units so I believe those are isolated cases.
@@NexiTech Thank you for your reply. I'm waiting reviews of Optoma P1 and then deciding which one to buy. P1 is huge and it requires more throw distance compared to A300.
Nothing I still have it, for lack of space in my home and to protect the screen from my 1 year old son how runs around the living room and grabs pretty much everything every 10 seconds ,:) I had to move the screen to the storage. When we move to the bigger place soon I hope, I'm going to make some nice custom TV stand for the screen and for the projector and I will probably make a video about it.
@@NexiTech sounds interesting, we are also moving into a bigger house next year, thats why im waiting with buying a new projector and projector screen. I won the fight with my wife to get an own room just for Entertainment, so im already checking for a perfect furniture (i will buy the vividstorm screen) to place the projector in it. its really ugly to just place it on the furniture haha. Vividstorm used an perfect furniture in this video: ruclips.net/video/R-dm25ZswmI/видео.html, hopefully i will find sth like that.
Looking for a 4k lazer projector that casts a 65 to 68 inch image. Almost all options i have seem so far give a range of something higher that this. For example 80 - 120. Im not sure there marketing specs mean that. 65 inch is not obtainable or if that just how they advertise. Can you recommend any options of ultra short throw 4k lazer projects that can make a slightly smaller image around 65 to 68 inches?
get any UST projector and keep it as close to wall as possible, you will get smaller image, idk how small but the farther the projetor from wall the bigger the image gets , so try this. good luck
Hi freind I need to ask you an important question I already purchase similar to your products such as wemax a300, vividstorm 120 inch and mi box s 4k Everything really looks amazing picture quality......etc. My question the display mode after activate the hdmi and I choose 4k2k 60hz on my mi box s the upcoming display came 2160p60hz and the color is 420, 10bit I was expecting to be more than the above or it's a normal Please let me know if the resolution could increase more Awaiting your positive reply
Mohammed Hindi That's all good my friend you got it right. 2160p is actually 3840x2160 pixels=4K in 16:9 aspect ratio. I'm glad that you found and enable HDMI 2.0 and choose 4k2k/60fps on Mi TV box. You can try to set picture profile on projector to movie mode and set brightness to high if you need more brightness. You might as well play with custom picture profile on the projector and customize it to match your needs. Also one tip. Get one USB 3.0 to Ethernet cable adapter with Gigabit speed and your Internet speeds will be be much faster and more stable when you watch 4k RUclips and 4k Netflix over Mi TV box. For example If you watch in over Wi-Fi the Mi TV box must lower resolution to 2k sometimes because of Wi-Fi limited speed. That's why I always use my Mi TV box with the USB 3.0 to Ethernet adapter and I always have 4k stable picture quality.
Thank for your time put to review these projectors. Quick question. On 6:30 you mention about difference of lux measurement between the Xiaomi 4k and the Wemax A300 and found them to be 1610 lux 1824 lux respectively. However on your other video when you measured Xiaomi 4k versus the 1080p model you found the Xiaomi 4k to be 2058 lux. Is this discrepancy(1610 lux versus 2058 lux) because of the new ALR screen. I think you did not have it when you first produced the Xiaomi 4k review video and you took measurements of off your wall. If you can just verify it would be great!!!Thank you for your time!! take care!!
Yes, exactly my friend. You figure it out :) Milja 4k had better results before because of the light reflection from the white wall. Now with the new UST,ALR,CLR(is there more names :D)projecting screen there is no light reflection from the wall and the brightness output/Lux meter results are lower but the picture quality is way better :)
@@NexiTech Thank you for your reply. I guess it is a fair compromise as the results with your new ALR/CLR are amazing. The difference can be seen on the video and I am sure it is even more evident up close!!!Money well spent!!! :)
How is the picture quality when watching 50Hz IPTV streams? I watch alot of IPTV using KODI IPTV plugin. Is the picture stuttering? I am planning on using the XIAOMI 4k Android TV box. Skål!!
previous model didn't do 50Hz making it useless in 50Hz countries. Does this do native 50Hz? Reply above suggests it doesn't do 24Hz but 'picture is smooth' at 60Hz ? Does not make sense.
Please make a Video with detailed Information about the needed distance from the wall for Differenz Screen sizes. Also exactly show from where it's mesured. From wall to the case or from wall to the laser Output? Official material says it would be 24cm from the wall for 100" how much would it Need for 108" and mesured from laser Output to the wall or from case ending to the wall? This is extremely important for me to know if my screensize is possible on my tv bank.
Hitman006xp Go find and look in the manual, it is specified there. Measurements are from the back of the projector. I think it would be around 11.3” in your case.
Hi Nexi tec, Please help me . When I start my xiaomi A300 , I don’t have the Main menu anymore . I have an other menu. I must press left control on my remote to find the main menu . Also when I press home menu on the remote ,it gets me the same other menu page .?? Please what can I do ? Thanks a lot
Hello , please I would like your opinion on the noise produced by the A300 ? I am going to be about 3 meters behind the VP , isn’t the noise too unpleasant ? Thank you in advance for your answer .
I had one question, are you able to set up the projector to start up on one of the inputs instead of the home screen?
Any recommendations on a moderately priced projector primarily to be used outside to show sporting events? Also that can penetrate through sunlight since it will be on a patio. Thanks in advance and keep up the great content!
Better than jmgo s3? I want to buy but what one is best
I don't know if this will help much but here are my experiences with gaming on the A300 projector, no ms measurements or anything, just from feel:
Forza Horzion 4 (Xbox One X) - No real problems here, all cars handle differently anyway so it's just a matter of adapting to this "slightly different handling" if anything
Titanfall 2 (Xbox One X) - You notice the delay and I was playing worse than before, it's not a deal breaker but in this type of game when you're online and every milisecond counts this definitely affects things
Call of Duty Black Ops 4 (Xbox One X) - Same as Titanfall 2, however when my friend played it who is much better at COD than I am he was able to prestige quickly and he was able to compensate the lag by being, well, really good at the game
Uncharted 4 (PS4) - No real problems for me here, everything is cinematic and less hardcore than an online game so a good time to be had. Nate always had a bit of delay to his jumps and the input lag from the A300 didn't make it that much worse.
Gears 5 (Xbox One X) - Characters feel like they're that much slower to respond and a few times I was killed by the opponent because everything contributed to me not being able to respond in time. Over a few matches though I was able to get better and have a good time, but you can still feel it.
Mario Kart (Switch) - Again with a racing game didn't have too much problem, just had to get used to timing my jump drifts. Four player multiplayer on a 100" screen is amazing.
Super Mario Maker 2 (Switch) - 50/50, on the harder Kaizo based levels you're going to have a bad time. On the more leisurely levels it's pretty ok
Street Fighter 5 (PS4) - WOAH! Just don't even try. This one is frustrating as hell and I was never able to get the hang of the delay. Looks fantastic, shame it's damn near unplayable both offline and online with the lag.
On an french website they measured 32ms input lag in 1080p... maybe the pixelshift adds a good amount of ms to it. Could you try that? Maybe even with recording a stopwatch on a mirrored monitor? If thats true, im gonna purchase it too :D
My freind there is different model by xiaomi
1) MI 4k laser projector
2) Fengmi 4k laser projector
3) wemax a300 4k laser projector
As per the reviews and comments by others MI 4K vs Fengmi
The Fengmi is 15 to 20% better image quality ....etc.
And also the reviewers said Fengmi vs wemax a300
Wemax a300 is better than Fengmi 4k for almost 20%
We dont know weather wemax a300 is upgrade version of Fengmi or the models is different
As you know the Chinese producing same spec with different names and shape
Please provide us your reply as your videos is very helpfully and grate
Looking forward to hear from you very soon
Again nice review I really like it
Maybe I can solve your confusion.
These 3 laser projectors are almost same, because it is all from the same manufacturer, just under the different brands.
but Wemax A300 is original brand of the manufacturer, its parameter is real and its internal configuration is the best of the three.
So that is why wemax A300 is better than others.
Hi😃
100 Inch for 3.4 distance meters, is good enough for watching? it's not huge? it's something that you get used to? since I prepare to swapping my 55inch TV to projector and 100 Inch ALR screen.
damn, damn, damn , about time. let me first watch the video man., i love you.
edit: as always great video, good comparison.
i guess ill go ahead with MIJIA until new model comes with really high lumens and real 4k instead of pixel shifting.
Thank you.
i think that is a good choice
300 dollars extra is not worth it just for 200lux different
Michael Kopec But you also get 4k at 60Hz!
@@ArmadilloGodzilla ok that is kinda a big thing. 4k at 30hz is so 2018
i suspect more documentaries especially will be at 4k 60hz though i doubt movies will go up that high framerate
and for 4k games too, if the lag is not too much
i hope he can test input lag for both models
@@H_B_R check out chiq B5U
Thanks for a great review! How big picture do you get if the projector is with the front (outside) 40cm from wall?
Dude, super review. I really appreciated seeing this. Thanks so much.
Brill good budget projector. Gives funds for a kickass sound system
Dear Freind finaly
I already proceed with wemax a300 today along with pro floor rising screen 120 inch from vividstorm the latest version
I will share you the setup when finish I just recieved the wemax a300 and vividstorm 120 inches also I got mi box s as well am awaiting my furniture it should arrived within the end of this month I will share with you the complete setup wemax a300 + vividstorm 120 inch its awesome
Awesome review ! Thank you so much for sharing. What about gaming? Have you tried them both? Is the input lag that bad? Im about to pull the trigger for one of these. Thanks!
I can not recommend any UST laser projector for gaming. Especially if you are high FPS gamer. Input lag is 90ms-110ms.
Its all about the screen u projecting on if im right, thats another 800€ +. Great job keep it going
MrLiquidhallo Nah, it’s 500 USD Incl shipping. Plus customs if you are unlucky....
which projector do you think is better than a Wemax A300 4k laser projector or VAVA 4k laser projector
Hello Nexi Tech, your Projector Tests are exzellent. What does you think? I Look for the UST Projector with the Best Blacklevel in Dark scenes. What would you buy?
what is the best image quality ALS screen brand for you so far?
Great review. I'm not getting one for another year, so who knows what is the best choice and affordable by then. How far away from the wall do you need to be for 120 and 150 inch screens?
ESL China Thanks, check the 1:17 for screen sizes.
@@NexiTech Ok, thanks. Do these projectors play x265 codec from an external drive?
Thanks so much for thorough review. I purchased this during black Friday and have now tested it out. I can truly say, the pictures are amazing as well as the terrific sound quality. Extremely happy with my purchase and look forward to watching movies and TV on it😊
any quality issue?
Hi. I have a question . MIlja 4k 5000 lms and WEMAX ONE PRO 7000 ANSI Lumens , which one will be brighter picture, i know ,that wemax one pro is only suports full hd, but we do not have to many movies in 4k yet.. Thank you.
Bought the "Fengmi 4K Cinema Laser Projector" after your Mija 4K video and am really dissapointed. My 1080p projector looks less "pixeled" than this "4k" projector. Also it makes a very loud highpitched noise. I hope I will not have any trouble returning it to Banggood
Great review, as always! Quick question - why did you not review it on the Vividstorm screen that you have? Or do you no longer have it?
TTBear2 Thanks! Nothing I still have it but I have to move the screen because of the lack of space in my home and I had to protect the screen from my 1 year old son how runs in the living room and grabs pretty much everything every 10 seconds ,:) I had to move the screen to the storage. When we move to the bigger place soon I hope, I'm going to make some nice customTV stand for the screen and for the projector and I will probably make a video about it.
I see is has a choice in one of the menus for 3D Options. I assume this will show 3D content and assuming it requires active shutter glasses. Does it have an RF or IF emitter for syncing the glasses? Or would it project passive 3D? Thanks
Yes, 3D works. I uses these 3D glasses and it works without a problem- bit.ly/2J8WK2y
Hej om du får välja mellan Wemax A300 och Xiaomi Mi vilken tar du och är det inga regnbågsefekter alls på dessa modeller ?
Hi buddy thankyou for this great video.. Does this model have a Game Mode in the picture settings?
Hi I have wemax a300 with Motorized ALR Floor Rising Pull Up Projector Screen XY Screens
. it gives really good and sharp pic and brightness is very good .
Just wanted your opinion as I watch movie online and have no issue with chines apps . Do I still need Xiaomi box s as you said it is better that TV box handle the processing
So I'm conflicted, Do i spend extra money and get the A300 or just go with the Mija 4k? IS it worth the extra money? They seem to be so close
You have to decide that my friend. To be or not to be :)
Hi! Your video is super...but what's about HDR on both projector and videogame experience on both?
Thanks! Well both projector do support HDR 10, game experience is not the best on both as input lag is around 90ms.
My question is how does the color quality compare to say a Samsung QLED TV? I'm assuming it's sharper. But are the colors vibrant? What about compared to LG OLED?
What kind of glasses should I buy for wemax A300? can you help me? banggod or aliexpress link ?
Sure mu friend! Here is the link of 3D glasses that I use:
Fengmi 3D glasses-
bit.ly/38UhlW8
@@NexiTech Thank you for the answer I bought the wemax a300, but it hasn't reached my hand yet, let's see, I hope it's a nice device
Hi, and the difference between wemax one pro and wemax a300? I am not sure but I might remember that you tested it too. Am I wrong?
how is your cr-10s performing after over a year of use on the new heated bed upgrade? was there anything you changed to the heated bed after you made the video?
I got bored, so I Copy-paste your comment under cr10s video and I will answer it.
@@NexiTech alright I just did, thanks!
Hey whats up what type of 3d glasses is best for these projectors, give me a link if can please thanks.
Sure man! These works great! Wemax/Xiaomi 3D glasses - bit.ly/2J8WK2y
Hej! bra jobb !!! Vad är den signifikanta skillnaden mellan VEMAX och Mijia. mvh
Another great review :) Do you know what Input Lag is? For PC gaming.
Thanks for the review, i got mine today!
How can i watch the Chinese tv series with the preinstalled app, please advise
can you watch TV on this thing if you just plug in your set up box from your ISP? just general TV, connected via hdmi..
Hi nexi tech, great video. You pretty much inspired me to get this projector. I am more interested in the Xiaomi Miijia 4k projector because of the price. How is the reliability on that projector? Like how often do you use it per a day? and do you still use it over the A300? I've been reading on the xda and avsforums and my biggest fear that it would take too long to startup or the screen would have lines. I would hate dealing with the customer service because it's shipped from China. I am about to pull the trigger very soon as I need to have a bigger screen in my livingroom. Thanks.
oxyzzmoron Thank you very much for kind words my friend!
Well, let me tell you that our Milja 4k is ON every single day pretty much all day long as it's our TV replacement sense I brought my 100inch UST screen 5 months ago. My wife and me have a 13 month's old son and baby program(music videos and animated video clips) is playing on the projector from 8h in the morning till 21h every single day and when our son sleeps then my wife take over the projector and watch the "Friends" on the Netflix for the 100th time, up till around 00:00h. So I would say that projector is running at least 16 hours a day for the last 5 months and it doesn't show any signs of wearing down.
BTW every month or so I blast the projector air wents with compressed air and you would not believe how much dust it collects inside sense it's running all the time basically.
If my calculation are correct projector should live with this kind of abuse for at least 4-5 years which is pretty good actually. If it dies or sometning happens with the projector in the future I will let you know here in the comments, so far no problems :)
PS.
The Wemax A300 has that glowing power button on the front and my son clicks on that bottom all the time every single time when he see it so it's impossible for us to use the A300 so we stick with the Milja 4K for now :)
@@NexiTech Awesome, thanks for your response. Yeahh I am going to get it by end of the year or early next year. Hopefully there's a deal for it on Black Friday in the US from banggood or gearbest. And yeah, I just don't think the A300 is worth the extra $800. The Miijia looks just as good in my opinion from all your videos.
@@NexiTech Hey Nexi Tech, I just bought the projector and took the your advice and took the risk of purchasing it from Gearbest. It came within a week to the USA. I am going to confirm that your review is very accurate. The projector is awesome! I've been showing my friends and they were complaining that it's super expensive but they need to realize that you're also getting 100"+ screen\Laser UST Projector. I used my PS4 Pro and Apple TV 4K so far and no complaints. The input lag is pretty dramatic from the reviewers because I was playing Call of Duty Modernwarfare, it's really not that bad if you just play for fun and not competitively. However, I need to purchase the 100" screen from Elitescreens Starbright CLR instead of XYScreens because I really don't want to deal with Chinese people. Other than the projector sounding like a turbine, so far so good. I just hope the hardware is kept reliable as some people were complaining in the forums. Thanks for advertising this and I really hope Xiaomi gives you something for this.
Hi, thanks for your videos, how is the 3d performance? I had a problem with the Xiaomi UST 4k, the 3D effect was green, all the blacks were green and the whites pink, and I didn't like that at all, is this using a similar effect?
You welcome mate! I use this 3D glases on both Wemax and Xiaomi UST laser projector - bit.ly/2J8WK2y
No issues with the blacks and green I just watched Lego 2 movie in 3D using these glasses but I do found that on some scenes some white objects in background like a white house was looking more pink then white, no idea why. I will try out other 3D movies when I got the time.
Hi, do you have an idea, how to add a microphone? it ask me to pair one with usb, my idea its for kareoke, but no idea wich kind of microphone to buy, also if it would work... thanks for your videos.... :)
Have you tried playing multiplayer games on it ? For Example Battlefield? How much input does it have ? Please answer.
Али Магомедов I already answer to that question few times in the comments.
Laser UST projectors are not that good for gaming. Input lag is about 92ms regardless of price point and model. I don't know any UST laser projector on the market that has input lag below 40ms.
Thanks for perfect review. Does it have coil whine? People says its noisy if room is quiet. Is it true?
Thanks! Well that's subjective. I read that some A300 has a higer coil whine where others not that much. I guess it that depends of version/revision of the power supply. My A300 had some coil whine when I sit close to the projector left side and If I move my head in specific angle you can hit that coil whine frequency. Now I don't know how many people will actually sit close like that and experiment with the head angle :)
Can we play dobly vision,HDR10+ and HDR?3D ISO also?
Hows the text display for this? Thinking of using this as a PC Monitor
Which projector is best in motion rate . Such as 120 hz
Nice video
How you enable 60hz 4K I am holding right button but no such options ?
Thanks for help
Click or hold the right bottom on remote and navigate to HDMI 2.0 then click ON. You can do it only when external device is connected to the projector.
Hey man.. can you do an ownership review of the 4K ust projector? I bought mine for a few months now and I have white spots on my xiaomi mijia 4K ust projector screen.. I notice one spot at first but the following week there’s like 8 plus spots in and around the screen.. do you have this issue? Hope you can help us find solutions as many of us who bought this projector have the same problems
What screen are you using?
What kind of speakers do you have?
Nice review!
What happens after 20,000 hours on a laser projector? One has to replace the entire thing or just one part?
Let's say you're using your projector on average about 5 hours a day and you use it literally every single day there is and never miss one, it will die in nearly 11 years.
throw in bin and buy a new one
When that happens, u probably will be getting a new one.. say 12k instead of 4k.. haha
Cool. Still no lottery money for me though, can't buy it
Don't play lottery and than you can buy it 😅👍
So considering the pricing for both models, which one would you recommend ?
Well Xiaomi 4k is more budget friendly and they are very similar in terms of picture quality and brightness output but if you are planing to play games from Xbox or PS4 it's might better to choose Wemax a300, according to the some professional testers input lag was lower on Wemax A300 but only on the chinese version while international version had high input lag.
@@NexiTech Thanks for replying 🙌
wow really well done review , can't help but be shocked how you answered every question i had about the projector good job and have a great day
Thank you so much, I'm very glad that you found my video useful and helpful. Have a great day too.
Have you encountered any issues with judder when playing 24p content at all? Specially on panning and movement scenes.
Not at all, picture is smooth in all movies that I ever watched both on my Milja 4k and now on A300.
I just check the files info on my resend 4K action movies that I have watched.
File sizes average 56Gb
Frame rate 23,98fps
Data rate 60256kbs
File MKV
Is there any specific movie scenes that you want me to test it?
@@NexiTech Excellent, thank you ever so much for the info! I was worried due to being native 60hz and not having a native 24hz mode that panning shots with movement (e.g. moving across streets, cities, etc) would have judder. Looks like now all I need to do is decide between the Wemax A300 and the Mijia 4K!
Do you have a personal preference between them?
@@BC-do2zp Sorry for late answer my friend! Unfortunately RUclips never send any notification on reply comments and I have to check manually instead. Well to be honest I really did not noticed any noticeable judder on 24fps movies on both Milja 4k or Wemax A300 and I have whole collection of movies. Movies really look amazing on both projectors. If you are worry about it I can record some movie scenes that you like with my Sony A6500 4K camera so that you can check it for yourself. I could not post more movie scenes due to copyright risk.
Well if physical power-button, new resigned case, extend flash memory, 8 point keystone.. etc are not of main consider you can easily go with Milja 4k as it's cheaper and you get more value for the money at this moment.
@nexitech Great view👍 tell me pls. Whats ur choice ?vava or a300
Changhong CHIQ B5U
please make a video comparing the consumption of m365 or m365pro in a straight position vs sitting position
just a quick video
people say that in 25km / h (full trothle) makes a difference of 20-25% test please.
test at all speeds (eco(15km/h) drive (20km/h) and sport (25km/h)
What's the latest update and review for the new wemax a300 4k in regards the picture quality it's worth to buy this projector or not
Looking forward to hear from you very soon
Latest update? In terms of software or? I'm not sure what you mean by latest update my friend. Well sure it's worth of money they are both great 4k UST laser projectors but I think that right now Xiaomi Milja 4k is better value for the money.
@@NexiTech my friend many thanks for the reply. I mean in terms of the picture quality warranty performance HDR between the both model
How would u compare this to epson ls500b?
when 120hz will be available i'll buy one
Can i ask how far should you place the projector from the screen, can i place it only 5-10cm from the creen to get 100inch, it sad 30cm but here in my country the seller claim that it only need to be placed 5cm from the wall to get 100 plus inch.
Nam Nguyen in manual screen sizes, pause the video on 1:17 and check on the left page.
Any good 3d, 4k laser projectors?
did you try play on it ? Some games like Gear of War or Doom ? I saw that this Projector have 115ms input lag and the same problem for Vava and some people told that this Projector are impossible to use for Gaming... At other way I saw one guy on RUclips who play Geas 5 on VaVa and very Happy with it. Can you confirm Gaming possibility on this projectors and give you opinion about that ? I use 86 inch 4K HDR TV and I'm planning to switch on 150 inch Wemax or Vava
Jan Odenbach already answer to that question few times in the comments.
Laser UST projectors are not that good for gaming. Input lag is about 92ms-110ms regardless of price point and model. I don't know any UST laser projector on the market that has input lag below 40ms.
Is this better than jmgo s3?
Hi, is it possible to use the projector speaker as a center channel in 5.1 setup ? Thanks!
Interesting question. I never tried that. let me try it and I will report back.
Добрый день Вам. Я так понимаю, Вы русскоговоряший автор, подскажите, пожалуйста есть ли недостатки в качестве картинки в сравнениее с олед тв на ваш взгляд?
upgraded already?! I haven't made up my mind about the Mijia 4K yet! lol
lol same here, i settled for optoma GT5600 + UST screen, will upgrade to mijia.
@@michaelkopec.5814 got to go 4k man, but how bright does gt5600's 3000 lumen feel for you?
@@dannydoyle8731 on white wall in daytime it looks shit, i have ordered 100 inch ust screen ,it will get here within 2 days. ill let you know, when i install screen and do some tests. projector is week old.
Good review. What do you think about Vava projector?
Ewerton Franco Thanks, I'm currently testing the VAVA 4k UST laser projector. Review video is coming by the end of this month.
@@NexiTech excellent. If possible compare with Xiaomi. Thank you so much. Your videos are the best
How do you deal with 24p contents? The motion judder can be quite jarring and obvious especially for fast moving scenes. Moreover, most content in RUclips, Netflix and other streaming media are often in 24p.
That depends my friend. If you live in county with 50hz electricity you can give projector 24hz input over Blu-ray player and motion is pretty good. If you live in country with 60hz electricity like US then I gues that can be a bit annoying if you have a keen eye.
@@NexiTech I live in a PAL region. However, from what I have read, the projector is locked to 60hz irrespective of the region.
Oh, My bad! Wrong projector, I thought that you ask about VAVA projector. On VAVA 4k you can switch from 50hz to 60hz in the settings if you want. Yes, you are right, the Wemax is locked on 60fps. Sorry I'm using RUclips studio app on my phone and I just see bunch of comments in the list with tiny thumbnail image and I reply directly.
Hey Nexi, your videos helped me make the decision to buy an A300 projector. However I am having problems accessing the playback settings to activate hdmi 2.0
I am holding down the right button with the three lines but it doesnt come up with the option for this, please can you help?
Jesse Hon Hi Jesse! Don't hold the right botton, just quck click on it and the pop up many will show up on the left side of the screen.
@@NexiTech thanks man, I now know what I was doing wrong, I was trying to access it from the main hub of the projector and not within the HDMI source. All operating at 4k 60hz now wooo!!!
can u post HDR video sample? or can it play HDR?
Great review, where is the best place to order the milja 4k and the screen you are using? any link would be great. Im located in Swe.
Nvm found it in your description. 😆
@@Delejon Have you received it in Sweden and did you pay extra taxes
Peter Bergstrøm I did not order it because i think the technologi is new for this device and its not perfect so i went for a traditional projector model epson tw-9400.
oh,nice video, may i know how is your charge if we put our product video on your youtube or facebook, like A300,XIAOMI, JmGO, XGIMI and our Salange projector?
I believe you should sent to him the said products like salange in order to check the pros and cons as this gentleman he is telling always the truth always and most of the people trust his review
Is there anything stopping me from moving the projector farther back to get a 180" (15 foot) image? It would be in a large, dimly lit room with a good screen.
Inverse square law? en.wikipedia.org/wiki/Inverse-square_law
Hello Nexi Tech,
Please I have just received my A300, and I don’t’ find the Resolution screen menu? May I ask you to help and show me where is this menu please ? I checked in Display menu but I didn’t find out.. thank you
Why do you need to have a TV box for Netflix 4k support? Projector itself comes with Android as well?
Hi BARATRION,
It's got chinese os, so can not do Netflix.
i love your review honest an very thorough i hade mi 150 an now fengmi 4k cinama both amazing for price
Thank you so much for your comment.
as always great review but why is this so expensive? instead of buying this + a special screen, I would rather buy the best oled tv out there.
lol try buying a 101" oled and compare the price again?
Good video as always brate moj! Keep it up proud of you
What was the input lag in this one ?
Pretty much the same like on other UST laser projectors. Average input lag is 92ms, not quite good for FPS games.
@@NexiTech thanks epson ls500 is 20 anyways 😊
Thx. How is the 3D on the A300 ?
I order the 3D glasses which I should receive in one week. As soon I test it with A300 I will let you know in the comment, because right know when I turn on 3D on A300 I feel that I will pass out in like 30 seconds without glasses :D
I owned the first laser projector of Xiaomi and it was stunning good, so it will be minimum as good as that one. I think there are not really big differences.
It also depends on your glasses and the quality of the movie file.
i used Hi-SHOCK® DLP Pro “Lime Heaven”. And i was really shockes as i started to view sample 3d movies on youtube. Ofcourse those 3d effects wont be in movies but still incredible. In my opinion its way better than Cinema 3d.
@@NexiTech Hi, still hoping everything is ok, got the glasses Sir ?
Yes I got it. 3D works nice, here is the link of the exact model - bit.ly/2J8WK2y
hi, i didn't buy the projector yet but I have Philips 3d active glasses, it will good enough or I'll need to buy the fengmi 3d glasses for using on the a300?
Does it take 110v from US?
Which one is more quiet? I saw from the other comment that Wemax has little coil whine too.
Both are pretty much the same. In dead silent room(when all you hear is your wall clock clicking) and when you come very close to the left side of A300 and you place you ear next to the left exhaust grill and move your head in specific angle you can ''catch'' some coil whine, but am not sure how many people will do something like that and honestly i believe that nobody will use this projectors in dead silent room on mute by siting right next to the projector left side while keeping their head on that specific angle. :)
For example Me and my wife we have one year old baby and the baby TV program is pretty much all day long playing on the projector every single day sense I got Xiaomi 4K model and now on Wemax A300 and nobody ever heard or be bothered with any coil whine noise including my 1 year young baby boy.
P.S. To be honest I have also read on some forums that few owners of Milja and Wemax projectors had received projectors with very high coil whine and as far as I know they send back their projectors and get replacement units so I believe those are isolated cases.
@@NexiTech Thank you for your reply. I'm waiting reviews of Optoma P1 and then deciding which one to buy. P1 is huge and it requires more throw distance compared to A300.
Спасибо за обзор!
Подскажите пожалуйста это последняя модель лазерного проекторам от xiaomi?
Oleg Levit English please.
What happened to the vividstorm electric screen you reviewed do you not prefer that.
Nothing I still have it, for lack of space in my home and to protect the screen from my 1 year old son how runs around the living room and grabs pretty much everything every 10 seconds ,:) I had to move the screen to the storage. When we move to the bigger place soon I hope, I'm going to make some nice custom TV stand for the screen and for the projector and I will probably make a video about it.
@@NexiTech Sounds like a great idea I look forward to seeing that custom build for the screen and all the best with your move and the little one :)
@@SebekRa Thank you so much Ahmad! Best regards my friend :)
@@NexiTech sounds interesting, we are also moving into a bigger house next year, thats why im waiting with buying a new projector and projector screen.
I won the fight with my wife to get an own room just for Entertainment, so im already checking for a perfect furniture (i will buy the vividstorm screen) to place the projector in it. its really ugly to just place it on the furniture haha. Vividstorm used an perfect furniture in this video: ruclips.net/video/R-dm25ZswmI/видео.html, hopefully i will find sth like that.
is this one better than the vava 4k?
Outofit I can't say I never tested VAVA UST projector before. I try to get one for the review.
Can be installed up side down on ceiling ?
Projector? Yes it can be installed on the ceiling.
Looking for a 4k lazer projector that casts a 65 to 68 inch image. Almost all options i have seem so far give a range of something higher that this. For example 80 - 120. Im not sure there marketing specs mean that. 65 inch is not obtainable or if that just how they advertise. Can you recommend any options of ultra short throw 4k lazer projects that can make a slightly smaller image around 65 to 68 inches?
The wemax one pro starts from 60 inches... And costs less... I'd need a comparison with that one too 😀
get any UST projector and keep it as close to wall as possible, you will get smaller image, idk how small but the farther the projetor from wall the bigger the image gets , so try this.
good luck
what diagonal are you projecting the image on?
XMITV 100inch
any quality issue?
Hi freind I need to ask you an important question I already purchase similar to your products such as wemax a300, vividstorm 120 inch and mi box s 4k
Everything really looks amazing picture quality......etc.
My question the display mode after activate the hdmi and I choose 4k2k 60hz on my mi box s the upcoming display came 2160p60hz and the color is 420, 10bit
I was expecting to be more than the above or it's a normal
Please let me know if the resolution could increase more
Awaiting your positive reply
Mohammed Hindi That's all good my friend you got it right.
2160p is actually 3840x2160 pixels=4K in 16:9 aspect ratio.
I'm glad that you found and enable HDMI 2.0 and choose 4k2k/60fps on Mi TV box.
You can try to set picture profile on projector to movie mode and set brightness to high if you need more brightness. You might as well play with custom picture profile on the projector and customize it to match your needs.
Also one tip.
Get one USB 3.0 to Ethernet cable adapter with Gigabit speed and your Internet speeds will be be much faster and more stable when you watch 4k RUclips and 4k Netflix over Mi TV box. For example If you watch in over Wi-Fi the Mi TV box must lower resolution to 2k sometimes because of Wi-Fi limited speed. That's why I always use my Mi TV box with the USB 3.0 to Ethernet adapter and I always have 4k stable picture quality.
so the only explanation for the whooping 300 dollars different is 200 lux better?
hurm is that worth it i wonder
Thank for your time put to review these projectors. Quick question. On 6:30 you mention about difference of lux measurement between the Xiaomi 4k and the Wemax A300 and found them to be 1610 lux 1824 lux respectively. However on your other video when you measured Xiaomi 4k versus the 1080p model you found the Xiaomi 4k to be 2058 lux. Is this discrepancy(1610 lux versus 2058 lux) because of the new ALR screen. I think you did not have it when you first produced the Xiaomi 4k review video and you took measurements of off your wall. If you can just verify it would be great!!!Thank you for your time!! take care!!
Yes, exactly my friend. You figure it out :) Milja 4k had better results before because of the light reflection from the white wall. Now with the new UST,ALR,CLR(is there more names :D)projecting screen there is no light reflection from the wall and the brightness output/Lux meter results are lower but the picture quality is way better :)
@@NexiTech Thank you for your reply. I guess it is a fair compromise as the results with your new ALR/CLR are amazing. The difference can be seen on the video and I am sure it is even more evident up close!!!Money well spent!!! :)
What is the best setting for the colour?
That's individual my friend. It's best to tune it yourself to match your personal preference.
Great comparison of very similar products.
How is the picture quality when watching 50Hz IPTV streams? I watch alot of IPTV using KODI IPTV plugin. Is the picture stuttering? I am planning on using the XIAOMI 4k Android TV box. Skål!!
Skååål!
previous model didn't do 50Hz making it useless in 50Hz countries. Does this do native 50Hz? Reply above suggests it doesn't do 24Hz but 'picture is smooth' at 60Hz ? Does not make sense.
@@makkapacca I'm also interested in knowing if 50hz are fine and also 23.976fps are fine?
Are these projectors good for gaming? Connecting PS4 to it?
kaka mizan unfortunately there is no gaming UST laser projector on the market regardless of the price point.
wow, thank you for the review..... can you watch 3d movies with this projector?
You welcome, yes you can watch 3D movies with this projector.
Please make a Video with detailed Information about the needed distance from the wall for Differenz Screen sizes. Also exactly show from where it's mesured. From wall to the case or from wall to the laser Output? Official material says it would be 24cm from the wall for 100" how much would it Need for 108" and mesured from laser Output to the wall or from case ending to the wall? This is extremely important for me to know if my screensize is possible on my tv bank.
Hitman006xp Go find and look in the manual, it is specified there. Measurements are from the back of the projector. I think it would be around 11.3” in your case.
Has this got HDR10
Fengmi 4K Pro v/s Wemax A300 .. whats is your prefference?
Hi Nexi tec,
Please help me . When I start my xiaomi A300 , I don’t have the Main menu anymore . I have an other menu. I must press left control on my remote to find the main menu . Also when I press home menu on the remote ,it gets me the same other menu page .?? Please what can I do ? Thanks a lot