there is different versions of these. if you only have cells (0-5 Volts) i would go for the EBC-A40L The A40L supports 40 Amps (Max 200 Watt) discharge and it can even charge as well!
Can you confirm if this load can go down to 0.01A discharge current either stand-along or through the software? I have the EBD-USB+ and it can be set that low. The specs say the lowest this will go is .1A but the minimum step is 0.01A?
@@Kolin4556 Thanks for replying after so long! I ended up purchasing the EBC-A01 which goes down to 1 mA and can charge/discharge cycle up to 1000 cycles at a time.
The software features on this electronic load are actually pretty nice (certainly considering the price)
That's good to know! I'll try and check it out one day.
What's the max time and WH output? Trying to bottom balance 32 cells at 230ah each... could take awhile if they're all in parellel.
there is different versions of these. if you only have cells (0-5 Volts) i would go for the EBC-A40L
The A40L supports 40 Amps (Max 200 Watt) discharge
and it can even charge as well!
Can you confirm if this load can go down to 0.01A discharge current either stand-along or through the software? I have the EBD-USB+ and it can be set that low. The specs say the lowest this will go is .1A but the minimum step is 0.01A?
0.05A min
@@Kolin4556 Thanks for replying after so long! I ended up purchasing the EBC-A01 which goes down to 1 mA and can charge/discharge cycle up to 1000 cycles at a time.