Best Floating Shelves! I-Semble Template Kit by TheTranq
HTML-код
- Опубликовано: 2 ноя 2023
- Buy Yours Here!
www.etsy.com/listing/1588456538
10% ISOTUNES DISCOUNT: bit.ly/34tCCmV
www.etsy.com/shop/TheTranq
Featured in my latest video, this new template kit I designed will help you create perfect floating shelves using the I-Semble floating shelf hardware. If you are looking to make beautiful shelves, you won't want to miss using this template system.
KNEW CONCEPTS FRET SAW: amzn.to/2S0moP3
Edgebanding Trimmer: amzn.to/38xHOYU
Shinwa Square: amzn.to/2VWOmJJ
Dewalt Router: amzn.to/3278xZf
Precision T-rule: amzn.to/2Sx44cS
Machine Square: amzn.to/2GOSU0A
FESTOOL Sortainer: amzn.to/3z3zXNY
BESSEY Clamps: amzn.to/3igP0OI
FREE PLANS: holdentranquillo.wixsite.com/...
Business Contact: tranq006@umn.edu Кино
Nice jig to simplify installation. You have a center-line on the side to ensure it goes in the correct location. Can you add a center-line to the mortise to make sure that it's centered on the shelf? Also, can the 9/16 center hole on the template be used when drilling to make sure that the hole is at 90° instead of a separate drilling jig, or are you worried about it getting reamed out over time? - Chris
Good points. I would not recommend using the hole marker insert as a drilling guide as like you said it will ream out. The hole should really be used with a drill guide. Not sure what you mean on a centerline in the mortise? Do you mean on the center of the template?
@@TheTranq Yes, you use a shim to get the template into the right location for the thickness of the shelf. A center-line of the slot in that direction would help ensure that it's in the middle. Close is probably good enough, but a center-line in both directions might help and it wouldn't be hard to implement. - Chris
@@fcschoenthal I see. If you freeze and zoom at 4:56 you’ll see there are markers on the sides to mark center as well!
@@TheTranq OK, I think that at 5:04 I see a line on the end that indicates center.
I bought and used your jig. I had some issues with it that you could easily fix to make it more useable for more people. The first jig used on the first hole worked on your router because it has an small base. I own 3 different plugs routers and they all had bases that would “fall off” jig when you get to the outer edges. When this happens the bit chewed up the jig making it irregular. If you could make this one piece maybe 2 to 3 ,inches longer on both sides it would solve this issue. I had to practice holding the router out over the edge in mid air which made the cut uneven. I then used a chisel to cut it down to correct depth. Of course the more I used it the better I got at it. Overall your concept is excellent the the depth gagues and jig for setting up drilling the holes were perfect. I also had a hard time finding the correct bit. I went to 5 stores including driving 50 miles to a Rockler store and no one had it. I finally ordered it online from Rockler. Overall I’m glad I bought your jig and thank you for putting it online to buy. Keep up the good work.
Like8
영상 잘 봤습니다!! 또 오겠습니다!!
How can I buy the I semble jig