Dear Mr Novice, I see you have been at it over a year now, so congratulations! When I started cutting commercially 7 yrs ago, the 372XP was my first saw purchase. It wasn't new but it sure ran and still does. I think it has one of the best power to weight ratios (if not The Best. I don't really know). I now have about a dozen Huskies and a few Stihls, but whenever possible I fell with the 372 and buck the trunks as well. I like my 390 XP when I need a longer bar, but it is a lot more weight to deal with. (Last summer when I purchased the 390, I would have liked to purchase the 395xp but could not find one available and I needed it NOW for a job..) If you get a chance check out the 347 XP. (One of mine is ported and walks through wood like butter...) It is my fav limbing saw and climbing when chunking down a trunk!
Just gotta ask...Is your 372 an XTORQ? They are great saws, and if it is, you should be proud, for sure. But... if you like it, you will LOVE the non XTORQ version. They are across the board better in every way. More power, more rpm, lighter, last longer...everything. But the XTORQ is really good too. Just sayin', if you ever get a chance to own an OE 372...take it. Ownership is different than running one for a moment also. They are leaps and bounds better. Glad you're liking the channel! Welcome!
@@randystrand908 it would say XTORQ right on the starter cover. They are still good saws, but soooo much better to have the original version, which it sounds like you have.
@@novicelumberjack Well, that's great news! And it makes sense since I purchased it from a shop which supplies saws & service to the logging industry in Michigan. The shop owner told me I was getting a really nice saw and that if he only sold THAT saw he could still stay in business from the 372 XP sales alone! (PS. Mine has the hand warmer option and it really is nice when the temp dips....)
I just got the same saw, same year. Had my mechanic check it over. He said its mint condition mechanically - Jackpot. Not as cheap as yours though. My other saw is a stihl 261cm. I like the husqvarna way more even tbough its old.
Yes... at last. Exactly my situation. I think the 372xp is miles better than the 261 except if you are in relatively small wood like 8 inch and you can wind the 261 up
That was definitely the case with my Pro Mac 700. The pulley was bigger making it easier to pull, but in turn, you had to pull the rope further. With this thing...gotta be in the port timing.
@@Sensei948 at 140 psi on a 372xp, I'd say the saw is starting to show some wear...or you have an off brand piston and cylinder. If it's the original cylinder, I'd recommend pulling the muffler off and having a look at the piston and how worn it is. 140psi is still plenty good to run, but it may be starting to get tired. Catching it at this point before it gets really bad means you will likely be able to simply install new rings, and you will see the compression go back up and have lots of life left in the saw. If it has a cheap cylinder, and that is what's causing the lower compression, just remove the base gasket. This will help out. But if it's running good, just use it. I've been having really good luck with made in China cylinders, but they do tend to run a little low on compression, and that really isn't such a bad thing. Lower compression will run cooler and is easier on the bottom end.
@@novicelumberjack Master, everything is original, the piston is already a bit worn, will the saw still have factory power? At what compression does the power drop?
At what compression does power drop? That's tricky, because low compression can help with rpm's...to a point. But what you're looking for, I think, is at what point should you rebuild- for that saw, I would put new rings and a new piston in it right now. It will run good probably down to 120 psi. BUT...you have a really nice saw, and if you catch it right now, you should be able to save the cylinder for years to come. If you keep going, the damage will get worse and worse, then you will have an expensive repair on your hands. Take it apart and inspect. The piston is likely transferring its alluminum onto the cylinder walls. Find a video of how to clean up a chainsaw cylinder. Most people use muriatic acid I think. Clean the cylinder and install a brand new Hyway pop-up piston and Caber rings from Wolf Creek saw shop. It will take about 4 tanks of fuel to break in nicely, and you will have a better running saw that is ready to last another ten years. Good luck!
Never ran one. But...I understand how the company works. It is basically a 372 with minor differences. Probably undetectable under anything but timed runs. It is probably an excellent saw. But as I said, never used or worked on one. Check out the channel- Afleetcommand. He has tons of info on questions like that. Guys name is Walt and he often does "Saw College" videos with Bob. SUPER informative. But keep watching my channel too!
@@novicelumberjack Subscribed to both channels. Can you make a video about carburator tuning? I can't find that "sweet" spot between air and fuel. Thanks for replying! 👍
Know what you mean about chainsaw hobbies bout a Mac 1-52 and a husky 61 for 100 bucks got them going and now have a collection of saws that I tinker with
What channel? You mean my original channel under my name? No, not quitting. Just really enjoying the woodworking. I've learned that the channels that do the best are laser focused on one primary subject. My original channel is all over the place. People are getting everything from cooking to metal fabrication. And it hasn't done very well because of that. This one, will be nothing but wood...and everything that goes with that theme. So hopefully, it will develop an audience of viewers who more regularly toon in.
Full crap- handle lol I hate those full wrap handles they get in the way all the time its just extr weight Those are a GREAT saw but there heavy has hell its great for bucking and felling but as far as commercial tree thinning it's way to heavy to lug ALL day I'd take an MS 361 any day for that 🤷🏽♂️
I would agree with u one of the bests saws ever made ever ,
Cuts good.iv been wanting 372 for ever.
The 372's are very nice saws, in any configuration. I have landed on a Jonsered 2171 Cutters Edge as my desired felling saw. It is awesome!
The power makes up for the weight. You don't have to spend as much time holding it cause the jobs done in half the time. Nice score!
Dear Mr Novice, I see you have been at it over a year now, so congratulations!
When I started cutting commercially 7 yrs ago, the 372XP was my first saw purchase. It wasn't new but it sure ran and still does. I think it has one of the best power to weight ratios (if not The Best. I don't really know). I now have about a dozen Huskies and a few Stihls, but whenever possible I fell with the 372 and buck the trunks as well. I like my 390 XP when I need a longer bar, but it is a lot more weight to deal with. (Last summer when I purchased the 390, I would have liked to purchase the 395xp but could not find one available and I needed it NOW for a job..)
If you get a chance check out the 347 XP. (One of mine is ported and walks through wood like butter...) It is my fav limbing saw and climbing when chunking down a trunk!
Just gotta ask...Is your 372 an XTORQ? They are great saws, and if it is, you should be proud, for sure. But... if you like it, you will LOVE the non XTORQ version. They are across the board better in every way. More power, more rpm, lighter, last longer...everything. But the XTORQ is really good too. Just sayin', if you ever get a chance to own an OE 372...take it. Ownership is different than running one for a moment also. They are leaps and bounds better. Glad you're liking the channel! Welcome!
@@novicelumberjack Mine just says "372 XP" How do I know if it's the XTORQ?
@@randystrand908 it would say XTORQ right on the starter cover. They are still good saws, but soooo much better to have the original version, which it sounds like you have.
@@novicelumberjack Well, that's great news! And it makes sense since I purchased it from a shop which supplies saws & service to the logging industry in Michigan. The shop owner told me I was getting a really nice saw and that if he only sold THAT saw he could still stay in business from the 372 XP sales alone!
(PS. Mine has the hand warmer option and it really is nice when the temp dips....)
@@randystrand908 that would be mentioned on the silver sticker on the pull wheel cover.
I get about 215psi from them and after port work they pull like 90cc 372 is a great saw! Easy for anyone to get gains from.
215 psi 🤣👍
@@lukereynolds9907 funny?
What's that? A five minute wonder 😅
I just got the same saw, same year. Had my mechanic check it over. He said its mint condition mechanically - Jackpot. Not as cheap as yours though. My other saw is a stihl 261cm. I like the husqvarna way more even tbough its old.
Yes... at last. Exactly my situation. I think the 372xp is miles better than the 261 except if you are in relatively small wood like 8 inch and you can wind the 261 up
Yeah I agree also, I have a few and there just great saws, wouldn't want anything else
Echo 620p , and 7310p are tied with my 562xp and my jonsered 2172 as my favorites (jred is my top of the top)
However in my uncle's collection (which will one day be entirely mine) there is an og 372xp that I want badly
I have the 372xp and it's a beast... out cuts my ms311 with ease
I'd hope so. Not even the same class saw
They just look huge,nice saw though👍BigGuy
My jonsared 625ii is a lil beast as well
I would assume it has something to do with the size of the pully/recoil diameter, but thats just a guess. My new to me 2065/2163 starts easy as well.
That was definitely the case with my Pro Mac 700. The pulley was bigger making it easier to pull, but in turn, you had to pull the rope further. With this thing...gotta be in the port timing.
@@novicelumberjack 140 psi Good compresion 372xp oe ? 1:33 oil mix ok ?
@@Sensei948 at 140 psi on a 372xp, I'd say the saw is starting to show some wear...or you have an off brand piston and cylinder. If it's the original cylinder, I'd recommend pulling the muffler off and having a look at the piston and how worn it is. 140psi is still plenty good to run, but it may be starting to get tired. Catching it at this point before it gets really bad means you will likely be able to simply install new rings, and you will see the compression go back up and have lots of life left in the saw.
If it has a cheap cylinder, and that is what's causing the lower compression, just remove the base gasket. This will help out. But if it's running good, just use it. I've been having really good luck with made in China cylinders, but they do tend to run a little low on compression, and that really isn't such a bad thing. Lower compression will run cooler and is easier on the bottom end.
@@novicelumberjack Master, everything is original, the piston is already a bit worn, will the saw still have factory power? At what compression does the power drop?
At what compression does power drop? That's tricky, because low compression can help with rpm's...to a point. But what you're looking for, I think, is at what point should you rebuild- for that saw, I would put new rings and a new piston in it right now. It will run good probably down to 120 psi. BUT...you have a really nice saw, and if you catch it right now, you should be able to save the cylinder for years to come. If you keep going, the damage will get worse and worse, then you will have an expensive repair on your hands. Take it apart and inspect. The piston is likely transferring its alluminum onto the cylinder walls. Find a video of how to clean up a chainsaw cylinder. Most people use muriatic acid I think. Clean the cylinder and install a brand new Hyway pop-up piston and Caber rings from Wolf Creek saw shop. It will take about 4 tanks of fuel to break in nicely, and you will have a better running saw that is ready to last another ten years. Good luck!
Nice saws for sure, I’ve got one and a 2163. You should try chaps and some hearing protection too.
🥱
Whats your opinion about the 365 x-tork
Never ran one. But...I understand how the company works. It is basically a 372 with minor differences. Probably undetectable under anything but timed runs. It is probably an excellent saw. But as I said, never used or worked on one. Check out the channel- Afleetcommand. He has tons of info on questions like that. Guys name is Walt and he often does "Saw College" videos with Bob. SUPER informative.
But keep watching my channel too!
@@novicelumberjack Subscribed to both channels. Can you make a video about carburator tuning? I can't find that "sweet" spot between air and fuel.
Thanks for replying! 👍
Sweet Deal!!
Know what you mean about chainsaw hobbies bout a Mac 1-52 and a husky 61 for 100 bucks got them going and now have a collection of saws that I tinker with
sick video bro
Thanks man!
the chainsaw hobby pays for itself? I wish haha
U ant quitting your channel are u, I enjoy watching your videos hate to see u go
What channel? You mean my original channel under my name? No, not quitting. Just really enjoying the woodworking. I've learned that the channels that do the best are laser focused on one primary subject. My original channel is all over the place. People are getting everything from cooking to metal fabrication. And it hasn't done very well because of that. This one, will be nothing but wood...and everything that goes with that theme. So hopefully, it will develop an audience of viewers who more regularly toon in.
@@novicelumberjack 272 xp and 372 xp have 155 psi when broken and the new ones are low compression saws !!
@@novicelumberjack 372xp rpm max 13500 ?
@@Sensei948 Yes. 13,500 RPM
Full crap- handle lol I hate those full wrap handles they get in the way all the time its just extr weight Those are a GREAT saw but there heavy has hell its great for bucking and felling but as far as commercial tree thinning it's way to heavy to lug ALL day I'd take an MS 361 any day for that 🤷🏽♂️
Just eat your Wheaties and the extra weight won't be a problem.