А без стусла ты и разметить ничего не сможешь, "умник". Будешь сидеть репу чесать или побежишь деньги на стусло или угольник тратить. Кстати такая разметка поточнее чем с угольником или стуслом будет.
That is the most work I've ever seen someone subject themselves to just to miter 2 pieces of pipe... get a speed square and a vise... or a chopsaw on a table... or eyeball it like a grown up lol
@@franciscreidebessa5000 Брат ... Имея возможность , да не имея способность ? Ты ведь понимаешь , что это слишком большая философия ... Берешь лист бумаги складываешь его как нужно и режешь ...
He didn't make anything harder, he knows his assignment,pulled off getting all you dummies to leave a comment how you could've done it way easier. Good job kid.
i like the unconventional ways of doing things. The content creator is trying to encourage getting non-thinkers to finally think their way out of a bind if ever need be. The negative commenters on this post lacks an appreciation for applied science and math. Thank you posting this hack. Now, I don’t have to go buy another bulky tool.
Buen aporte,la mejor forma de crecer y desarrollarse en el trabajo es no depender completamente de las máquinas porque no siempre se tienen Y en trabajos de grandes dimensiones o lugares en la sierra dependes completamente de éste tipo de conocimientos Envidiosos!
Square tube motorcycle frames were in style back in the early 80's and inquiring minds asked why; it turned out the new style came from race fabricators working in aluminum, which was cheaper and easier to find in square and rectangular sections.......and, oh yeah, MUCH easier to cut and shape in the compound angles they were working in!
A lot of criticism landing on this one. Yes, a miter saw would be the way to go, but assume for moment that he does not have the couple of hundred bucks to buy one or he is working in the field where none are available locally. His purpose may simply to show us how with practically nothing you can pull off a reasonable layout and create a pretty good miter without calling the boss and whining that I need a miter saw if you want this done.
Sensacional demais fantástico estou aprendendo muito xom seus vídeos, ótima atitude parabéns e obrigado por compartilhar seus conhecimentos.🙏🏽🙌🏽👍🏽👏🏽🙌🙏👍👏💡❤️💪🏽🌿👏🏽
Когда человек слишком грамотный, он не ищет лёгкий решений. У меня было так с задачками сына по математике. Решил сыну задачу, как человек с высшим физико- математическим образованием по сложному пути.... Но мне сын сказал, что это неправильно, так они задачи с тремя неизвестными не проходили.. Не помню какой класс, но точно не проходили..... Теперь думаю, что в институте меня переучили..... Слишком...
This process was overkill for a miter cut. If you were making a saddle on a T joint, this guy had the right idea since you cant miter a saddle. Smarter not harder. A protractor could have even saved him time. Personally I love the spring loaded pipe clamps that have channels cut out for all the common miter angles plus saddle lines.
आप लोगों से मेरी एक बहुत ही खास शिकायत है कि जब भी आप चौकोर या गोल पाईप या एंगल को जोड़ते हो तो हमेशा 90 डिग्री का ही जोड़ दिखाते हो । मैं खुद एक प्लंबर हूं और घरों में पानी की सप्लाई के छोटे पाईप डालता हूं पर मुझे दिक्कत आती है जब पाईप का जोड़ 90 डिग्री के बजाय 30 , 45, 60, 75 डिग्री पर भी पाईप जोड़नी पड़ती है । मेहरबानी करके 90 डिग्री के ही पीछे मत पड़ो और गलती से ही सही मगर 30, 45, 60, 75 डिग्री पर ज्वाइंट करके दिखा दिया करो । आशा है कि आप एक गरीब प्लंबर की शिकायत पर गौर करोगे । धन्यवाद !
Для таких работ давно придумано стусло (ручная нажовка по металлу). Цыркулярка настольная (электрическая пила по металлу). Пора выкидывать каменные топоры!!! 😊
Couldn't you just as easily rig up a frame of wood with a triangular side at exactly 45 degrees, bolt a sleeve of PVC tubing so the metal can slide in, then fill a bucket with paint and then slide and dip the end of the metal in the paint to get the exact angle, then do it to the other piece, wait for the paint to dry then come back and cut it the next day?
You didn't happen to have "squared-off" the ends of those pipes with a chop saw, did you? It also does 45s. I do like the paper trick though. Better than guessing when the grinder is all you have. I usually hold my speed square on the pipe and line one eye up to aim my sharpie with. It's not always circles.
All you haters are missing the beauty of this. I’m gunna try it. I just need some pipes/angle grinder/tape/pen/square and a reason. Then it’s go time. Yahhh
Alternativa 1= capo matematico y geometrico. Fue a la universidad. Alternativa 2= ingenio natural, adquirido en la experiencia. No fue a la universidad.
Metal chopsaw at 45° wins
БОЛГАРКОЙ И БЫСТРЕЕ И ЛЕГЧЕ И ТОЧНЕЕ !!!
Вообще то 90
@@alexxwelder4713cut at 90 and you'll end up where this video started 🤯
Read my mind
In a shop, without a doubt. On a jobsite near power, obviously. Doing repairs in the middle of wherever, it's good knowledge to know
Thats the most complicated way of cutting a 45° cut that i have ever seen.
🦧yea ! @ tack to long ...
Si de echo, a la cortadora de 14" le pones un tope a los 45 grados y listo
@@urbanhesse6084😅 no
😂😂😂
@urbanhesse6084 yeah tack way to long buddy
If your foreman saw you cutting paper jigs at a job site, you'd be cutting paper jigs at home.
I always do it 😂
He had to have made this just to piss his foreman off. So many extra effin steps!
Why not show us the alternative
Oiii
@@mariocooldude9092э́
Id like to point out there are both Americans and Russians here on the comments wondering why this guy is making this task so difficult.
Lmao! I translated one of the comments after I read yours and laughed my ass off! Dudes getting roasted!
Я русский и я в шоке
Суета ради суеты. И дурная (глупая) голова рукам покоя не дает.
... and mexicans
@@trianglechokeUYeah in all his videos. He is so dumb these are almost entertaining..
When you have all the tools and refuse to use the right ones
А просто 45градусов запилить проще ьудет. Я такие вещи вообще на глаз всегда делаю и получается все четко
Диаметр трубы отметить сбоку сделать метку и отрезать
Вот и делай " на глаз" так и дальше.
Зачем ты нам это говоришь - союзников ищешь.?
Я тоже легко на глаз также отрежу. Причем любой деаметр до 300го
Всю жись на глаз делали и седла, и 45%.
Если не на глаз и точно, существуют стуслы инструмент для этого предназначенный,
Блин, ну честно слово, сам придумал задачу, и сам решил. Стусло западло использовать. Мамкин гений 😮
тоже не знаешь как угольником 45 -гр нарисовать ..... думай !
и еще 34 гения лайкнули )))
А без стусла ты и разметить ничего не сможешь, "умник". Будешь сидеть репу чесать или побежишь деньги на стусло или угольник тратить. Кстати такая разметка поточнее чем с угольником или стуслом будет.
@@Aleks_A.
мамкин инжынэр целый прицел придумал😂
That is the most work I've ever seen someone subject themselves to just to miter 2 pieces of pipe... get a speed square and a vise... or a chopsaw on a table... or eyeball it like a grown up lol
Die Hauptsache ist, dicht nicht in die Hose zu machen........ 😊😅😢😂😮🎉......
É uma solução engenhosa demais para um ângulo de 45 graus simples demais mas valeu mesmo assim agora sabemos como não fazer pra economizar tempo.
Сначала мы придумываем трудности, потом их решаем😂
45°- на станке можно отрезать
Можно без станка
Nicely done😂
It’s a difficult task to harvest hundreds of comments, but he’s done it like an artist. 😊
Ya that wasn't his first time
lately anytime i see the finger wag in the video...i know the comments are gonna be good 😂
And the solution's going to be stupid.
Офигеть какая наука ... Бумажные кружочки , папье маше, ножнички , фломастеры ... Такое впечатление , что трубу под сварку подгоняли девочки на уроке домоводства ...
папье - фике .... Люся что ты понимаешь ?
Ну метод рабочий. А того, кто выпендривается, всегда можно самого опустить.
A e só vira morsa da Poly corte. 45 graus e corta o tubo
@@franciscreidebessa5000 Брат ... Имея возможность , да не имея способность ? Ты ведь понимаешь , что это слишком большая философия ... Берешь лист бумаги складываешь его как нужно и режешь ...
Pythagoras didn't use paper circles...he used shadows!
Ля, ты чудо, толковый слесарюга на раз сделает без лекала! Сам по этой теме работал на коленке получалось не хуже!
The rubber dipped grip gloves say it all. This guy welds in rubber gloves.
😂
There is literally no welding done in this video. I'm able to change gloves between tasks, maybe he is too.
Как можно работать без защиты. Вдруг случайно палец отрежет себе
No need for the saddle on Cut hand-cut template, Swanson speed square give you 45.
ХОРОШИЙ СОВЕТ , ЕСТЬ И ДРУГИЕ ВАРИАНТЫ . НО ЭТОТ ЛЕГОК И УДОБЕН !!!
Что-то мне подсказывает, что один доктор покажет с десяток более простых способов сделать это
Next video he welds up a jig using twenty bolts that holds the pen and rotates it.
I'd just wing it and let the welder fix it.
He didn't make anything harder, he knows his assignment,pulled off getting all you dummies to leave a comment how you could've done it way easier. Good job kid.
Best comment yet
I need the Fork lift mechanic to analyze this for me!!!❤
Как всё легко, когда подскажут грамотные люди 😊👍❤
Wow, as a former maintenance manager and pipefitter, I'd have to fire you for wasting time.
خب شما راه حل ساده ترش رو نشون میدادی
@@sajadakbari5102 Use a chop saw.
Для меня как человеку не профессионалу самое то что надо. Спасибо ❤
i like the unconventional ways of doing things. The content creator is trying to encourage getting non-thinkers to finally think their way out of a bind if ever need be. The negative commenters on this post lacks an appreciation for applied science and math. Thank you posting this hack. Now, I don’t have to go buy another bulky tool.
Пиздец это гениально сверх разум
не для средних умов
respectfully bro 👍
Very nice minimal gaps with the angle grinder cuts . People not always can a chop saw be used good example 😁
Para lograr ese ángulo de 90 g cuando pusiste el tubo encima del otro ahí mismo sacas el 45 g que necesitas
В любом случае работа выполнена! А каким способом это не важно!
не 10 мин. а 2 дня - ерунда )))
Слова колхозника
배울점이 참 많습니다 최고👍👍👍
How to take a simple job and make it as complicated as possible.
That angle grinder cut and transition to deburing was on time!
Как я понял не обязательно круг вырезать. Можно замерить диаметр трубы и отмерить нижнюю часть до верхней
пасути дело гаваришь : если глядеть на трубу как на плоский прямоугольник, получается что короткая сторона даст 45 градусов :)
Thanks for sharing 👍
BUT
Miter Cutting jig is also very easy option
"Yeah I don't know why I got fired, I saw this neat little trick on the internet"
Buen aporte,la mejor forma de crecer y desarrollarse en el trabajo es no depender completamente de las máquinas porque no siempre se tienen
Y en trabajos de grandes dimensiones o lugares en la sierra dependes completamente de éste tipo de conocimientos
Envidiosos!
Deus te abençoe sempre valeu super dica amei!
Square tube motorcycle frames were in style back in the early 80's and inquiring minds asked why; it turned out the new style came from race fabricators working in aluminum, which was cheaper and easier to find in square and rectangular sections.......and, oh yeah, MUCH easier to cut and shape in the compound angles they were working in!
A lot of criticism landing on this one. Yes, a miter saw would be the way to go, but assume for moment that he does not have the couple of hundred bucks to buy one or he is working in the field where none are available locally. His purpose may simply to show us how with practically nothing you can pull off a reasonable layout and create a pretty good miter without calling the boss and whining that I need a miter saw if you want this done.
Спасибо тебя великий мастер.
Muy buenos trucos amigo. Gracias😊
I usually don’t like these videos but this one is actually handy👍
Sure thing
이미 설치 됀 배관을 잘라낸 후 구조변경할 때 유용하게 쓰이는 방법입니다.즉.커터기를 쓸수없는 환경이 있씁니다.👍
Name of song?
Sensacional demais fantástico estou aprendendo muito xom seus vídeos, ótima atitude parabéns e obrigado por compartilhar seus conhecimentos.🙏🏽🙌🏽👍🏽👏🏽🙌🙏👍👏💡❤️💪🏽🌿👏🏽
Без базара нет слова браво
Eu tava precisando de muito desta dica vlew mesmo brother 👍🤙👍💪🤙👊👏👏👏👏
Thank for sharing knowledge 🎉
Просто ушм и сварка всё заварит. Даже не надо останавливать работу.
УШМ 45 - гр нет , а в угольнике есть --- ИЩИ !
Если бы я так размечал, то я бы и неделю не проработал бы... - был бы изгнан с позором!!!! 😂😂😂😂😮
мес. и ты дома пишешь )))
The best technique for cutting-edge of tube or pipe
Когда человек слишком грамотный, он не ищет лёгкий решений. У меня было так с задачками сына по математике. Решил сыну задачу, как человек с высшим физико- математическим образованием по сложному пути.... Но мне сын сказал, что это неправильно, так они задачи с тремя неизвестными не проходили.. Не помню какой класс, но точно не проходили..... Теперь думаю, что в институте меня переучили..... Слишком...
И, во всём есть логика, но где то, оно перевалирует над уровнем раздумий.
ЕСЛИ ПАМЯТИ НЕТ - НУЖНО ПИТЬ ЗЕЛЕНКУ !
Congradulations you made that ten times harder than it needed to be.
Boa!! Legal! Da hora! Obrigado!
Parabéns pelo vídeo!
Joda mi herma, sigo a varios, pero tú eres el mejor con estos trucos compa.
لا تحتاج لرسم ورقة إنها زاوية قائمة ضبط الصاروخ على 45 درجة واقطع .. مع حبي وتقديري وبالتوفيق
Gracias hermano, justamente ocupaba este jale
This process was overkill for a miter cut. If you were making a saddle on a T joint, this guy had the right idea since you cant miter a saddle. Smarter not harder. A protractor could have even saved him time. Personally I love the spring loaded pipe clamps that have channels cut out for all the common miter angles plus saddle lines.
That’s enough youtube for tonight
Such a simple idea. Thanks😊
Galing tlaga ng pinoy idol injoy lang
🤣🤣🤣. En una sierra angular, lo pones a 45 grados y lo cortas en dos segundos. 🤣🤣. Menudo artista. Un saludo del mejor calderero de Euskadi 😤🚬. Paz 🤙
आप लोगों से मेरी एक बहुत ही खास शिकायत है कि जब भी आप चौकोर या गोल पाईप या एंगल को जोड़ते हो तो हमेशा 90 डिग्री का ही जोड़ दिखाते हो । मैं खुद एक प्लंबर हूं और घरों में पानी की सप्लाई के छोटे पाईप डालता हूं पर मुझे दिक्कत आती है जब पाईप का जोड़ 90 डिग्री के बजाय 30 , 45, 60, 75 डिग्री पर भी पाईप जोड़नी पड़ती है । मेहरबानी करके 90 डिग्री के ही पीछे मत पड़ो और गलती से ही सही मगर 30, 45, 60, 75 डिग्री पर ज्वाइंट करके दिखा दिया करो । आशा है कि आप एक गरीब प्लंबर की शिकायत पर गौर करोगे । धन्यवाद !
Для таких работ давно придумано стусло (ручная нажовка по металлу). Цыркулярка настольная (электрическая пила по металлу).
Пора выкидывать каменные топоры!!! 😊
Gracias. Muy buen tutorial.
Mis respetos el que sabe sabe y por eso se les dice oficial es decir ya no es un un cualquiera felicidades y mis respetos
Русский сварщик на глаз отрежит и приварит не хуже чем на видео, только в 5 раз быстрее😂
бля. у тебя под рукой уголок лежит. а на нем 45 градусов есть. одним движением и вся проблема решена.
Well you could just make a line at a 45° angle instead of doing all of this...
Useful to work..Good luck
great idea,would of never thought this one out!!!
Who would've ever guessed that welding would be the most contested topic on the internet
ótima dica parabéns!
Show de bola Guerreiro.
Keep slaying the game!
Couldn't you just as easily rig up a frame of wood with a triangular side at exactly 45 degrees, bolt a sleeve of PVC tubing so the metal can slide in, then fill a bucket with paint and then slide and dip the end of the metal in the paint to get the exact angle, then do it to the other piece, wait for the paint to dry then come back and cut it the next day?
You didn't happen to have "squared-off" the ends of those pipes with a chop saw, did you? It also does 45s. I do like the paper trick though. Better than guessing when the grinder is all you have. I usually hold my speed square on the pipe and line one eye up to aim my sharpie with. It's not always circles.
Great video thanks 😊
Здорово для новичков мелких домашних работ,
Но мастер с стажем на глаз отрежит
All you haters are missing the beauty of this. I’m gunna try it. I just need some pipes/angle grinder/tape/pen/square and a reason. Then it’s go time. Yahhh
😂 😂 😂 .. !! Mucho fururu.. solo se corta en 45° grados y listo se acabó. Saludos desde Paterson new jersey. 😊
Gracias por la enseñanza 😊
Ma esiste la troncatrice per il ferro, Basta metterla ha 45 gradi ed esegue il taglio di sbieco.
Да если бы у меня таким художеством слесарь занимался мы бы один стык до вечера варили😂. Опыт и практика всё подгонит с первого раза.
Alternativa 1= capo matematico y geometrico. Fue a la universidad.
Alternativa 2= ingenio natural, adquirido en la experiencia. No fue a la universidad.
Я уже 5 заготовок на глаз отрезал Пока смотрел этот ролик 😁
That was the most inefficient way ive ever seen anyone cut a 45° angle
I always bring my crafting supplies to the job.
Which music is this ??
This is Awesome 😎
Muy buena idea 💡😃🤝🏼
Nice lil tip ! Try it on some big inch ? Some 24inch std
Фаак, 45 градучей, я подму руку этому мужику, он молодец
Çok güzel çalışma olmuş tebrikler 🇹🇷👏👏
There’s a pipefitters BLUE BOOK or an old school HART book that has those layouts.
Lambat wkt atuh kitu mah bosku😁🇮🇩
Если бы я столько времени тратил на такую ерунду, меня бы с работы выгнали. Это же не нержавейка.
На угольнике есть угол 45° либо отметил от края размер диаметра трубы и получится градус 45
Very clever 👏👏👏