I love the Seats. This is such an awesome build. Can't wait for it to be done. Also, I think I saw that Paul on Fab Rats had to put the speedo gear in for the transmission to shift correctly. I'm no expert but might want to double check that.
Love seeing Sean’s work too, he’s insanely talented. Amazing to see the work he does, just extra grooves in the beginning for better looks. Just so awesome
I think if you were able to show more work on the On X build, you'd get a whole lot more votes! The incredible work that Shawn (Sean) does needs to be seen!
Robby, next time you have to put a bearing in just put it in the freezer over night until it's time to put it in. The cold will shrink it enough for much easier clearance Clarence
Those are the coolest seats I have ever seen. The man needs to trademark those fast. Then sell the design to a seat maker or yall do it yourself. Dead serious guys.
Be sure to install a case saver on the pump so it doesn't wear a hole in the rear case half. The rear case is magnesium. Built one yesterday... takes special fluid not Dextron 3.
Buen día saludos a Robby y a su equipo me gusta como trabajan, es un excelente la forma cómo van armando cada pieza hasta que quede perfecto Algún día llevaré mi Jeep para mejóralo Saludos desde La Paz BCS 👍👍👍
Next time get some dry ice and alcohol freeze the bushing use a nut and bolt with thick washers to in stall it makes life easier! That's how I put bushings in Aircraft!
Robby flexin . . . The ideas , the tools , the skills I wanna be Robby Layton we I grow up ! Does Sean have a nickname? If not it should be Santa Claus , because that dude makes dreams come to life ! Great work Santa , I love you work .
you should always change the plastic wear parts, even if they look okay you dont know how old they are, plastic can get brittle with heat cycling and then shatter later.
Also too if you go through Miller you can always take and put pink or purple and make a welder and say it's for breast cancer or suicide awareness because that's pretty much the colors for those just a little FYI
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Want to look great while supporting the channel!! Head to robbylayton.com and get some awesome merch!!
No, ROBBY LAYTON!!! 😡😂
Good to see Sean on cam and talking more. What a skilled fabricator.
Shaun is the Shinix. Everything he do turns out amazing. Robby you are a lucky man.
Shawn does the most awesome metal work I have seen. That man is a great addition to your team.
Awesome work Sean is a master don't ever let him leave
Shawn's skillset is amazing! What a craftsman!
Make the same seats for Fred. Shaun is one in a billion ❤️🏴
Sean is an absolute artist with aluminum.
Sean is truly the master fabricator. Great job guys😊😊😊
100 percent
That dude deserves every cent you are paying him! And I imagine it's a lot!
I'm so glad you listened to us and showed us the work Shawn does!!
We need more.
Shawn makes me laugh with his look when Robby says Shawn says it's ok😂 and he never said anything 😂
Shawn is very skilled and humble, you made a great decision adding him to the team..
You did a great job on camera, Sean!!! I know it is tough but you really kicked some butt in this video!!! Thanks for sharing!!
Shawn is a master craftsman. Really enjoy when he decides to be in a video and admire his skills
I remember Cato from Iron restoration.
Shawn is the best metal fabricator I have ever seen. Without him Robby would be lost and dead in the water
Good to have a friend like Paul to call. Watched his Transfer case Video.. He still helped you out even after you broke his arm!
Glad to see Sean on camera and sharing his knowledge
Awesome to see Shawn (sp?) getting camera time. His knowledge and skill are unbelievable.
Sean is a master in his craft.
I love the Seats. This is such an awesome build. Can't wait for it to be done.
Also, I think I saw that Paul on Fab Rats had to put the speedo gear in for the transmission to shift correctly. I'm no expert but might want to double check that.
Does anyone know what Sean built before he appeared here?
I want to have a look. His work is absolutely awesome.
I think that Shawn is an extremely valuably asset to your shop. I think he can fabricate almost anything if needed. I wish your shop was in Maryland.😊
Sean's artistic ability is beyond belief 🎇🎆
That guy Sean is something else God bless him.
Love seeing Sean’s work too, he’s insanely talented. Amazing to see the work he does, just extra grooves in the beginning for better looks. Just so awesome
I think if you were able to show more work on the On X build, you'd get a whole lot more votes! The incredible work that Shawn (Sean) does needs to be seen!
Really enjoy watching Sean perform his artistry in metal.
Shawn is amazing, great to watch him work.
Love seeing Shawn’s work.
The seats look pretty darn nice. Best part, doesn't go against this budget!
Her neck her back!!! Omg Robby that hilarious I know what you wanted to sign. lol too funny. Awesome content.
Shawn is a beast, amazing fabrication "artwork"
I enjoy that you bring your kids into the videos it makes me smile
I'm with ya 200% HillBilly !! Go FORD ! Sean / Shawn ... what else can we say ?! Insanely Awesome! Just like Ford. =)))
Lincoln is killing me!! “WOBBYWAYTON!!!”
@Shawn Man, Shawn, you are so much more than a fabricator. You're a fookin' Artiste! I love watchin' you work brother. Keep up the great work!
Spectacular work, Sean!
Sean leads the video with some amazing work.
Shuan is quite the craftsman, your lucky to have him 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Sean.... No words... Kiss my fingers, muah! Work is impeccable.
Those seats are Sean art at its finest
Shawn is a fab wizard!
Robbie with your team and Shaun you could be the next Kindig-it designs 😂
I know everyone says it but , Shawn is freaking amazing in his ability to think this stuff up and then make it come true.
Sean needs his own channel!!
It is great to see Sean's amazing skills\work.
What "Quality WORK " from Sean.
Robby, next time you have to put a bearing in just put it in the freezer over night until it's time to put it in. The cold will shrink it enough for much easier clearance Clarence
Shaun is way beyond Sema, look at the work
Shawn Metal master 🤘🏻
Wouldn't the slip yoke eliminator be a saftey item, it's unsafe for the drive shaft to fall out 😊
Is there anything Sean can't make them seats are amazing & nice to see him on camera talking 👌🏽👌🏽👍🏾🇬🇧🇬🇧
Great job again.
Shawn is one amazing metal guy, wow
27:23 idea heat the bearing as the shell sits in water put as much water in at well to keep the aluminum cool if your trying to heat the metal
Shout out to homeboy Cato! You got the right man!!
Robby you have such a talented team
I love what you are doing mat
Shawn is a magician !!!
Sean is a rock star.
sean that belly pan looks excellent,great job
Those seats look fantastic
I can’t wait until Cato has them finished. 🏁
I'm not understanding why you're using aluminium for skid plates? I know it will look nice. But how about dragging it across rocks?
Those are the coolest seats I have ever seen. The man needs to trademark those fast. Then sell the design to a seat maker or yall do it yourself. Dead serious guys.
Be sure to install a case saver on the pump so it doesn't wear a hole in the rear case half. The rear case is magnesium. Built one yesterday... takes special fluid not Dextron 3.
The seats are looking good.
Shawn just wow!!
The chevy transfer case looked so good because chevys dont run long enough to wear one out!! Right Hillbilly 😂
Shaun is good, he will surve you well
Did a good job talking to the camera Shawn 👍
Buen día saludos a Robby y a su equipo me gusta como trabajan, es un excelente la forma cómo van armando cada pieza hasta que quede perfecto
Algún día llevaré mi Jeep para mejóralo
Saludos desde La Paz BCS 👍👍👍
Yeah lmao, you gotta love it.
THANKS FOR ANOTHER GREAT VIDEO
Next time get some dry ice and alcohol freeze the bushing use a nut and bolt with thick washers to in stall it makes life easier! That's how I put bushings in Aircraft!
The seat Sean and you built is so cool!
Addie, did the Tooth Fairy come and give you the "First Tooth" money? Lol 😊🦷
Awsome will my 69 Charger also have custom seats like the 69 Bread truck ?
Robby you need that tone ring . Will not shift without it 😮
Robby I Have Even more Respect for you man The Quote from The Movie Tommy Boy, Sean Amazing Work your the man dude AMAZING work
I'm always surprosed at how nothing goes against the budget. It's almost like there isn't one
Is that Cato's from Texas ! fantastical to see him still doing his thang.
Wow 🤯 those seats 💺 are awesome 🙏❤️😎🤙
Robby those seats that you and Shawn made are definitely really awesome looking for sure!!! Shawn definitely killed it on those seats for sure!!!
Great video love seeing Shawn on more he does great work 10/2/24
👍🏽🇺🇸👍🏽 Sean is the man. Just wondering if there isn’t anything he can’t build? Seats are amazing..
Robby flexin . . . The ideas , the tools , the skills I wanna be Robby Layton we I grow up !
Does Sean have a nickname? If not it should be Santa Claus , because that dude makes dreams come to life ! Great work Santa , I love you work .
maybe Seanta Clause?
“Her neck her back” …. I finished that line 😂
you should always change the plastic wear parts, even if they look okay you dont know how old they are, plastic can get brittle with heat cycling and then shatter later.
Awesome ❤
New process is who makes the transfer case. Ford,Chevy, Dodge buys them all from the same place.
Lincoln is the Man!..
I get a smile every time I see the little guy.
Her neck, her back...... LMAO! I got it! I have said the same numerous time.
well done with beat it old song young people thanks
If you heat completely around a hole you will make it smaller.if you heat a pie shaped area if will make the hole bigger.
Also too if you go through Miller you can always take and put pink or purple and make a welder and say it's for breast cancer or suicide awareness because that's pretty much the colors for those just a little FYI
Kids were hilarious !!
The comment that springs to mind: "Give us the job and we'll finnish the tools"!
Sean rock's he's a game changer . He needs his own channel.