Thanks for sharing your range test. Super helpful! I really do enjoy flying walksnail setup. It's cheap, it's reliable and fits even into 3inch (and less) quads 😊
@@Michelsen3K well when you get the right manufacturer batch it is reliable. :D I always disassemble the VTX and do the quality control and optionally resolder suspicious things. Then I do the thermal coupling as it should be done and then I really can say that it is reliable every time. :)
@@VincentFPV well i didn't know this is a thing. As for me i've never had any issues with my five vtx's (hd v1, nano, lite and v2s) . I'll keep that in mind. But to be honest this shouldn't be the case when receiving a product as a consumer from a company like caddx. If this happens twice i'll switch over to DJI, no matter how much i like the WS system.
My favorite kind of flying down wooded paths. I have Babyhawk2 people only hear it within a few feet. I do the same avoidance maneuver as you do, lol Good flying
For long range cruising I use 1080 50mbit, for freestyle I love the 720p high framerate hight bitrate. But that is just when I fly alone. I would fly standard bitrate when people around fly as well because the high bitrate use more bandwidth. Racemode is not for me bud the latency is noticably better and some could prefer that.
I know YT vid is crap, But I have watched a lot of various WS videos and they are far clearer then every setting you showed in fact I fly analog and it looked almost as good as your vids appears almost every setting is so blurry it is almost unflyable ( I assume in the goggle it had to be far clearer) but the vid was a blur . ( may be my YT settings I do not know )...odd is my response very odd
Firstly turn on 4k resolution here on YT because fullHD resolution on YT is a bad joke. If you already did, there are other things worth mentioning. The place is really full of trees and with analog on 800mW wasn't able to finish this circle. Penetration of walksnail is really good. But downside is that the picture details has to fit into 25 (resp. 50) mbps. It's not enough to make every branch and every leaf detailed. So this make the video more blurry. Also when out of those trees I fly low enouh that compression fights with the crop field. There are many things for walksnail that are not ideal in this place. :D But the race mode is really unusable in this place.
@@FlyingBuzzard i mainly fly walksnail, but also enjoy my analog quads. The picture in the WS googles is definitely crystal clear when 1080p is active. Al already mentioned, when bitrate drops near signal loss, the picture becomes obvious blurry in the goggles. As i said, i enjoy flying analog for various reasons but it's like day and night when i switch between digital hd and analog in terms of google image quality.
@@VincentFPV lens is not loose. right now I'm soft mounting the whole mount. will try to loosen it more because still got a bit of jello when i tried a while ago
I don't understand but if it is any complaint about OSD, then I have many excuses why it looks like it looks. :D I know only two OSD tools and both of them has some flaws, here is problem that osd cant be resized. But the important for me was the Goggles OSD with bitrate and latency. Unfortunately it couldn't be baket into a vide without the actual .osd file. So it is what it is. ;)
Thanks for sharing your range test. Super helpful! I really do enjoy flying walksnail setup. It's cheap, it's reliable and fits even into 3inch (and less) quads 😊
@@Michelsen3K well when you get the right manufacturer batch it is reliable. :D I always disassemble the VTX and do the quality control and optionally resolder suspicious things. Then I do the thermal coupling as it should be done and then I really can say that it is reliable every time. :)
@@VincentFPV well i didn't know this is a thing. As for me i've never had any issues with my five vtx's (hd v1, nano, lite and v2s) . I'll keep that in mind. But to be honest this shouldn't be the case when receiving a product as a consumer from a company like caddx. If this happens twice i'll switch over to DJI, no matter how much i like the WS system.
@@Michelsen3K well I didn't and I am still satisfied with Caddx product. I do all the things mostly as prevention. ;)
My favorite kind of flying down wooded paths. I have Babyhawk2 people only hear it within a few feet. I do the same avoidance maneuver as you do, lol Good flying
Thanks :) i have build a three incher for that now :D even quieter and smaller
Great video!
Nice testing!
Read on Facebook that the hd v2 vtx seems to perform less well in bandos(?) . Anyone know if this is true?
Nice dude.. What is the best setting do you think for freestyle and mid range cruising?
For long range cruising I use 1080 50mbit, for freestyle I love the 720p high framerate hight bitrate. But that is just when I fly alone. I would fly standard bitrate when people around fly as well because the high bitrate use more bandwidth. Racemode is not for me bud the latency is noticably better and some could prefer that.
Woah! Variable VTX MW?
Nope that is ELRS TX power on the left.
I know YT vid is crap, But I have watched a lot of various WS videos and they are far clearer then every setting you showed in fact I fly analog and it looked almost as good as your vids appears almost every setting is so blurry it is almost unflyable ( I assume in the goggle it had to be far clearer) but the vid was a blur . ( may be my YT settings I do not know )...odd is my response very odd
Firstly turn on 4k resolution here on YT because fullHD resolution on YT is a bad joke. If you already did, there are other things worth mentioning. The place is really full of trees and with analog on 800mW wasn't able to finish this circle. Penetration of walksnail is really good. But downside is that the picture details has to fit into 25 (resp. 50) mbps. It's not enough to make every branch and every leaf detailed. So this make the video more blurry. Also when out of those trees I fly low enouh that compression fights with the crop field. There are many things for walksnail that are not ideal in this place. :D But the race mode is really unusable in this place.
Good to know @@VincentFPV
@@FlyingBuzzard i mainly fly walksnail, but also enjoy my analog quads. The picture in the WS googles is definitely crystal clear when 1080p is active. Al already mentioned, when bitrate drops near signal loss, the picture becomes obvious blurry in the goggles. As i said, i enjoy flying analog for various reasons but it's like day and night when i switch between digital hd and analog in terms of google image quality.
my video got a lot of jello when it is really bright
Check if your lens isnt loose or make a softmount of the camera
@@VincentFPV lens is not loose. right now I'm soft mounting the whole mount. will try to loosen it more because still got a bit of jello when i tried a while ago
DJI tards be sweating 😂
I el osd megoro
I don't understand but if it is any complaint about OSD, then I have many excuses why it looks like it looks. :D I know only two OSD tools and both of them has some flaws, here is problem that osd cant be resized. But the important for me was the Goggles OSD with bitrate and latency. Unfortunately it couldn't be baket into a vide without the actual .osd file. So it is what it is. ;)