Bolt in Lump kit installation Chevy Inline 6 On a Head Shop
HTML-код
- Опубликовано: 9 сен 2024
- Process to install the bolt in Lump kit on a Head Shop. These machines are used in a engine rebuild shop. We did not discuss the Bolt boss removal. That is done in another video we did.
Info on what this modification does for the head.
www.12bolt.com...
Tools needed
3 Drill bits: 9/32 for counter sinking Holding bolt or 8/32 counterbore
11/64 for #8 bolt through the head
#29 for drilling hole to thread in lump
8/32 tap
If you enjoy my videos. My son could use your help. He is suffering from Muscular Dystrophy. gofund.me/7115...
Thanks for taking the time to video this process.
I would go through a half a dozen heads before I would get it right. Sure glad to wait, to get one from you instead!
I remember you installing Lumps in heads 12 years ago.
Thank you for this video Tom. A. IAm about to start the same lamp port on my 250 I will be ordering it from you, when it back in stock. I’ve already got most of my stuff for that engine from you. Love it.
The lump kit's are in stock on the website. www.12bolt.com/store
Thank you I will be ordering it
Great video! Thanks Tom
Nice🤔👍👍👍
My son is a machinist and he put your kit in my 250. We've added long tube headers and a homemade intake, along with a Ford 2 BBL. Stock cam and HEI. Pretty zippy but I wonder how much a cam would have added. I'm a real stickler about a smooth idle.
Make sure to upsize the intake valves to 1.84 and our RV/Marine HO cam would work wonders over the stock cam. Then you will not believe how much better it will run.
Hi! How much CFM of difference do you gain with the installation of the lumps? Compared to a standard one
www.12bolt.com/65279inline-cylinder-head-flow65279.html
Glad to see you’re keeping busy Tom! Any updates on roller cams? I’d really like a mild grind, daily driver roller. I’ve had a lot of trouble with flat tappets crapping out in my V8’s and I’m terrified I’ll run into a similar problem.
www.12bolt.com/store/p196/Billet_Roller_Camshafts__250_-_292_Chevy.html
seems like going round your elbow to get to your nose , but ok !!
I’m looking for the valve angle to the cylinder.
Best to use email tom@12bolt.com
I still don’t know what the stock angle is. But for maximum
De-shrouding David Vizard’s Book states “ In practice, it turns out that about the optimum angle for the intake valve from the bore centerline is about 18 degrees. For the exhaust, where shrouding is less important, the optimum angle is approximately 10 degrees.”
At this point in time lol
How much do you charge to install the lumps? Just curious, I’m fixing to put some in for a guy . Thx for the video!
200.00
@@telowe2000 ok cool thanks!