Thank you for insight on how to do it yourself, I would add apply release ease to hopefully get it off easier next time. Thank you! Also, that shield should pull up for center blade access. Thanks!
What year and model do you have? I have a 14 Z force SZ and it has a handle on the right side to raise and lower the deck. Your's seems to use the left pedal? I like your clamp method for holding your box wrench. Good video.
wrap a chain around the front where the wheels are, use your loader to pick the thing up, change the blades and lower the thing. Way, way, way faster. You can even power wash the underside of the deck while you are at it. If you don't want to do that, if your deck is like mine (Hustler) it takes all of 1 minute to drop the deck and pull it out.
If you just drop the deck and take it out it's way easier. Did it today twice once to change blades. The second time because I got a strap wound up in blades.
I find it's easier to get a specific size of 4x4 and use it to jam the place against the angles of the deck to lock the blade using it to break the nut loose
Hi, I like your videos, especially how you go about perfecting / sharpening edges, im wondering your thoughts or weather you have or may make a video on sharpening drill bits ? A jig of some kind, your theroy, even making a video........ Thank you
Thanks for watching my videos. Good idea! Will make a sharpening drill bit jig. Not sure if I will have time this summer but will definitely sleep on it. I also want to make another knife sharpener. One that is easier to make and more compact. Cheers!!
Im impressed, you're able to fic every problems that you have, all by yourself, you're like a dad for all of us!
Winter here
Excellent job on making your axe jig
Your drill jig im sure will be excellent as well
Look forward to viewing
Thumbs Up
You're awesome!!! I changed the blades ... by myself!!! Hahah was a lil scary but hell yeah!! Thank you so much!!
Thanks for sharing. I don’t see an Allen wrench. Maybe an opened end or box end wrench.
Thank you for insight on how to do it yourself, I would add apply release ease to hopefully get it off easier next time. Thank you!
Also, that shield should pull up for center blade access. Thanks!
wow...alot of work to change them blades but I think you have the technique under control....SALUTE
What year and model do you have? I have a 14 Z force SZ and it has a handle on the right side to raise and lower the deck. Your's seems to use the left pedal? I like your clamp method for holding your box wrench. Good video.
thanks for the video. much easier than removing the whole deck.
wrap a chain around the front where the wheels are, use your loader to pick the thing up, change the blades and lower the thing. Way, way, way faster. You can even power wash the underside of the deck while you are at it.
If you don't want to do that, if your deck is like mine (Hustler) it takes all of 1 minute to drop the deck and pull it out.
I Like the blade idea. I been having issues with to much grass building up..heavy year on the rain and the mower does not like it.
man, that's a lot of work
If you just drop the deck and take it out it's way easier. Did it today twice once to change blades. The second time because I got a strap wound up in blades.
Take the deck off much easier - I did it today. I wish there was a video for that but it wasn't bad.
Going to start a go fund me to get this dude an impact. My forearms are sore just from watching geez
I find it's easier to get a specific size of 4x4 and use it to jam the place against the angles of the deck to lock the blade using it to break the nut loose
pull your mower on trailer ramp. drive up on either side. plenty of room under neath. get air tools. way less dangerous
That's a good idea...
Thanks for posting the video. I think I'm going to try it that way. Instead of the way that Cadet says. Which is to remove the deck completely.
What a PITA to work on.
We’re these regular or left hand threads?
Ever heard of an impact?
Hi,
I like your videos, especially how you go about perfecting / sharpening edges, im wondering your thoughts or weather you have or may make a video on sharpening drill bits ?
A jig of some kind, your theroy, even making a video........
Thank you
Thanks for watching my videos. Good idea! Will make a sharpening drill bit jig. Not sure if I will have time this summer but will definitely sleep on it. I also want to make another knife sharpener. One that is easier to make and more compact. Cheers!!
Your Allen key is called a wrench wtf do you guys call Allen wrenches up there? Bent sticks? Fucking dumb click bait
why didn't you clean the caked on grass out from under the deck while you had the blades odd ???? amateurs !!
Leverage not torque with the long bar
why dont you just take the deck off to do it?
Stop calling an open end wrench an allen!