It would have been nice to see the connections properly in the video but unfortunately I could not, although I understand the object was to see the small current v large current which I now understand, the cables in the video made it hard to see what was connected. I was more interested in the 5 connection points on the device (assuming 5, not sure?) and more info on its practicality. Love your video's Thanks for Hours and Hours of learning (I'm only trying to expand my mind "I'm not an electrician, or even in training, but I like the science of it all) Any chance of a simplified video on the same contactor because I'm very interested ? Thanks again! Love your channel keep it up! Kind Regards Bryan
Where would you typically house the contactor box? Here you've got it near the switching point, which I guess is great for testing, maintenance and the opetrator hearing that clunk (and in the test rig for the ammeters). I can see you might sometimes want it near the distribution board to keep the wire runs short of the load circuit, avoiding looping them down. Is there something in the regs about safety etc that I've not thought of? Maybe it doesn't matter, and it goes wherever's convenient?
Is that 3 neutrals at the contactor? Is one of them connected to the light? On the 1st contactor video it went straight back to the board that's why ive asked. Cheers 👌
One neutral is for coil, another neutral is from the consumer unit to the incoming side of the contactor and the last neutral goes from the outgoing side of the contactor to the load(s).
Yicheng Automation is a very professional factory in automation equipment fields. them manufactured many automatic assembly line for the switches and sockets manufacturer.
Dose having an internal cell for one network (say o2) within a building like a pub, overpower the coverage and weaken the coverage from the other networks?
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I sadly look forward to these videos whilst lying in bed. The wife doesn't like it. Ooops!
THANKS FOR SHARING LADS I LOVE WORKING WITH CONTACTORS AND RELAYS GREAT VID FOR LEARNERS
Excellent explanation thanks, going back to watch the other vid you mention now.
Well explained guys... And another very informative video...
Hi thanks for the positive feedback Gaz 👍
Good video 👍🏼
Great video, explained well👍🏼👍🏼👍🏼
it would be wonderful if u provide a SLD at the end of the video or when u start explaining the circuit. thanks for another wonderful video
Hi. Thanks for watching and commenting we will try and continue to improve our videos 👍
Thanks very much for this video.
It would have been nice to see the connections properly in the video but unfortunately I could not, although I understand the object was to see the small current v large current which I now understand, the cables in the video made it hard to see what was connected. I was more interested in the 5 connection points on the device (assuming 5, not sure?) and more info on its practicality. Love your video's Thanks for Hours and Hours of learning (I'm only trying to expand my mind "I'm not an electrician, or even in training, but I like the science of it all) Any chance of a simplified video on the same contactor because I'm very interested ? Thanks again! Love your channel keep it up! Kind Regards Bryan
In some scenarios access to a secondary circuit may be limited. Could a single MCB feed both the switch and contactor?
Please I will want you to do a video on how the contactor can be connected with a relay and timer
Where would you typically house the contactor box? Here you've got it near the switching point, which I guess is great for testing, maintenance and the opetrator hearing that clunk (and in the test rig for the ammeters). I can see you might sometimes want it near the distribution board to keep the wire runs short of the load circuit, avoiding looping them down. Is there something in the regs about safety etc that I've not thought of? Maybe it doesn't matter, and it goes wherever's convenient?
can those circuits be fed from different phases i take it they can as they don't come in to contact with each other?
Hi
ruclips.net/video/bkboBItqFXE/видео.html
This link may help.... thanks for watching Gaz👍
Yes, they can be fed from different circuits, different phases even different consumer units.
Wow wish i had youd knowledge
Is that 3 neutrals at the contactor? Is one of them connected to the light?
On the 1st contactor video it went straight back to the board that's why ive asked. Cheers 👌
One neutral is for coil, another neutral is from the consumer unit to the incoming side of the contactor and the last neutral goes from the outgoing side of the contactor to the load(s).
@@ashmanelectricalservices4318 thanks pal
Wiring diagram?
Poor Gaz getting left out
👍👍
Yicheng Automation is a very professional factory in automation equipment fields. them manufactured many automatic assembly line for the switches and sockets manufacturer.
Dose having an internal cell for one network (say o2) within a building like a pub, overpower the coverage and weaken the coverage from the other networks?
I think your barking up the wrong video
Where would we be without electromagnetism... 😀
I didn’t think this was explained to well… what’s in a1 and a2? What’s in the top and the bottom of the contactor
A1 feeds the coil A2 is neutral to smooth the circuit
Bit of a silly joke at the end AH?
🤦🏻♂️
To much talking instead of explanation