SNES Game Won't Boot - Fixing eBay Junk - Super Mario World
HTML-код
- Опубликовано: 3 окт 2024
- I recently picked up a copy of Super Mario World for the Super Nintendo. This game will not produce any signal. In this video, I open it up, fix the problem and replace the battery.
Tools You'll Need (Ebay affiliate links)
rover.ebay.com/...
#RetroRepairs #FixingEbayJunk #RetroGaming
Want to buy me a beer? Or a broken console? Hit up the donate link (But only if you want, don't feel obligated). www.paypal.com...
Thanks for watching 
Игры
Great fix! Love your channel.
RUclips actually suggested something I'd enjoy.
Praise be the algorithm!
Eject button: "Am I a joke to you???"
Don't tell me how to live my life
It starts to get Loose If you push It too much times... Best way to preserve "mechanical" parts are not using them.
@Dave Hanson Nah, this is why you buy a retrode 2 and just dump all of your save data and roms and play through an emulator, save the original hardware, keep it in good shape, and still get to enjoy all of your favorite classics www.dragonbox.de/en/accessories/cartridge-dumper/retrode-2-cartridge-dumper
@Dave Hanson Or: just leave it on 24/7 to not wear out the power switch.
Really the eject button does what you can do by hand. It just applies extra leverage.
Thanks so much for doing these videos! I recently picked up a copy of Mike Tyson's Punch Out at a flea market for a great price and noticed it wouldn't boot when I got home. I was able to find three broken traces and fix them all thanks to these videos. It now works flawlessly and I saved $10 on the game! It's actually kinda relaxing therapeutic doing these kind of repairs.
Nice! Good job.
Instead of soldering the battery directly to the board you could solder a CR2032 battery case to it and then put the battery into that case... that would be a cleaner solution which would make a future battery replacement easier too
Battery will last over 10 to 20 years will you really need to replace it again
@@michaelholmes4374 short term thinking
@@Gorton how is that short term thinking in 10 to 20 years most people will have moved on I've had enough of retro collecting sold most of my expensive games replaced with a flash cart
Nice video dude. I enjoy watching these. Real chill and relaxing.
He's like the Bob Ross of microelectronics.
No, that would me.But not gonna lie this guy is awesome👍
Just found this channel and it is chill.
For reals! Hos vids get me relaxed and in a chill vibe, sometimes even helps me to fall asleep easily in a weird way lol
I have never seen a more thorough and helpful tutorial in my life. I learned so much! Thankyou for sharing your knowledge with us interwebs. I look forward to polishing and restoring some of my own personal collection! ❤🎮
You do a great job with explaining clearly in your vids man. Keep it up
These videos never feel as long as they are. By the time you're done it's like, "Wow, that was almost 30 minutes!?"
Especially at 1.5x speed 😋
That qtip squeak is like a nail through my head.
Flush cut the battery leads, this will make it easier. This removes the battery that is acting like a heat-spreader absorbing all the heat from your iron.
Ricardo Cooper also, heating a battery is a bad idea(tm)
It also doesn't help to first remove the all the solder from the bottom of the board. If the pad is dry, the iron only makes contact in small spots. Working on a fillet reduces the thermal resistance between the tip and the board -- as does using something better than a D1.6 tip.
I'm assuming most people don't have a desoldering iron that's worth anything. Parts like this with only a few flexible leads can easily just be walked out of the board with the iron. Add solder, hinge part out, wick pads, replace part. Wicking is even optional. For something like this, you could just walk it back in. Before anyone complains that there's a risk of lifting traces on the top side, I have to point out that digging around and prying while insufficiently heating the bottom side is an even better way to ruin things. The same goes for scrubbing around with a weak desoldering iron, trying to get the topside fillet to melt or trying to get the last bit out of the hole.
@@PSUQDPICHQIEIWC In fact PCBs are pretty hard to delaminate mechanically unless you do something very stupid. What kills them is the absence of preheating - and the thermal expansion that follows. So what I usually do with through-hole mounted stuff is preheating things (well, I always do this), applying much solder to have some heat storage - and then just pulling them out while heating with both the iron and some supporting heating (can be done even with a small blowtorch should you get used to it). Can require walking for wider components (some small ones can be just shaken out), but this never caused any bad consequences. Of course, doing this with a battery isn't the best idea though, so I'd just cut the leads off :)
Preheating is good advice. A lot of people recommend plate heaters, though I find that it works better to use your hot air station to add heat where needed. A hot air station (or heat gun) can couple heat to either side of the board and can be selectively applied, unlike a hotplate.
But you're right. The whole thing is an issue of heat flow. The plating in the hole has such a thin cross section that it has a significant thermal resistance on the through-board axis. Similarly, the solder annulus has a small cross section and the alloy has low volumetric conductivity. A large part of the heat that you're coupling to the top side has to go through the part lead. This is why it's a pain to wick a hole after the lead has been removed. You're either going to have to increase the temperature or minimize all the resistances on the solder side, or you're going to have to bring heat to the top side via some other path.
FWIW, the plating adhesion on paper phenolic is much weaker than it is for something like FR4. Especially if the board has been hot in service, they peel extremely easily.
@@PSUQDPICHQIEIWC TBH I prefer to not use wicks for holes at all. Those are not SMDs so you don't care about any extra solder anyway, all you need is the hole itself. The most fun way I found so far was adding much solder to make it melt better - and next using a thin tube to just blow the air through the hole. Unlike the vacuum solder removers this requires no contact at all (even some significant distance is still ok), and the surface tension makes most of the solder just fly away should it be heated well enough.
As for air guns, yes and yes! Hotplates take too long to properly heat things up (as your board has different heat diffusion paths and inconsistent IR reflectivity you are forced to heat it very slowly) - and with a gun you can control the heat gradient on the fly. Though I sometimes prefer smaller torches - as the flame is a stream, it has a lower pressure compared to the ambient air, as a result the colder air gets mixed in, creating a very stable temperature gradient - just find the "sweet spot" and use it :)
if only this video existed 20+ years ago..it might save most of my broken game..=) nice video by the way
Brilliant, useful not just for fixing games. But fixing any old electronics. I have an old AM Radio in a vintage car which could benefit from a lot of these repair techniques also.
Great video! I usually put kapton tape on the edgeconnector before going near it with solder, hate when the nice golden fingers turn silver..
True, if you watch AkBKuKu's video on him trying to add chips onto a ram board, he get solder on the pad and trys to remove it with a sucker, he ripped the pad itself off and had to use a little copper piece from a spare PCB to fix it.
Your so cool bro!!
@@eKoV11 "you're" you mean?
I love to watch you fixing the issues. So satisfying.
Hey boss!!! When cleaning your pins. I use a big pink eraser. Then follow it up with IPA.
It gets all that brown oxidation off the pins.
For polishing it’s a whole different thing.
You can use glass top oven cleaner. And it will get the pins superclean. But I prefer using brasso. And light scrubbing.
Great job as always.
But I rather think the brass went off from the pins, because it was used a lot. They losed their colour.
I didn't know u could fix it like that.
Also strangely satisfiyng and relaxing
3:10 that’s where John Riggs would have said the game is beyond repair lol
Screw john riggs lol he doesn't know how to fix games 😂 in all his videos he just cleans them. He doesn't put effort on fixing the game. He likes to take the chips off and put them on a working board. Basically sacrificing a game to make the other game to work.
Dude that's awesome. It hurts my back watching the tiny work. Like a claustrophobic feeling. I'm proud of you.
It started up was such a warm feeling. That game was my first love
Hearing you clean the pins gave me cold chills😂
Rescued another one from the Trash Bin.... Well Done!
When you put in the cartridge... those sounds brought me back to my childhood. =)
Great video. When I repair my cartridges I use a metal polish called “Brasso” on the pins. It does a fantastic job of removing the tarnish and makes the pins bright and shiny. You have a new subscriber. 🤘
Brite boy may also be worth a shot, similar to brasso but less harsh. :)
Thanks to your videos that I fixed my broken cartridges. First timer at soldering and I did great 😉 thanks bud!
Always clean the entire cart before even testing it, so your system doesn’t get dirty and break too. Nice work btw 👍
No nail polish on the broken trace this time. But hey, it does work. Great job !
Little hack, we use nail clippers to cut the wire as you get a very close cut and it tight spaces very easy to use.
When you were trying to get the battery out with the tweezers, I remembered what I was thinking the last time I tried to replace a potentiometer on a guitar “damn, you need 3 hands for this sort of job”
The cleaning of the pins makes my ears and soul bleed
I read this before watching and though, how bad could it be?
But you nailed it
OMG I wish there was a warning for this, ouch.
EdgyShooter i was going to comment exactly what you said lol
I wet sand my NES contacts with electrical contact cleaner and 2000 grit automotive sandpaper. Quit cringing. If your contacts were tarnished when you started cleaning and were shiny when you were done then you removed metal from them. That's how removing tarnish works, no matter what method you use. You can't get clean contacts without removing damaged metal.
@@adamgh0 i understand this, but it doesn't make it any less painful to hear... Also can't believe you used the word cringe unironically.
Tedious, but worth it for the sense of accomplishment alone. Good job.
Learning how these things work and what to do if something isnt working right is why I subscribed. Thank you!
I imagine myself fixing my own old games in the far future. And with this sort of content, that vision can easily be reality.
"Quick repair video" = 27min :D
27 youtube Mins might as well be hours in real time.
Since u found gunk above the pins in ur 1st step, i would also clean the carts inner casing too as there will still be gunk left there that more than likely broke the 1st trace u repaired. non the less great vid mate.
I love your contents my man I've
Fixed a ton of cartridges and consoles from watching you videos. But I have a recommendation for you I don't know if anyone has told you before but I have found that glass cook top cleaner does the best job of clean the pins on cartridges. Hope you find that useful and thanks for the videos.
"to desoder, the first thing i like to do first is add more soder"
Me: *surprise pikachu face*
It sounds weird but it's the way to do it
Desolder..... Solder.
It helps form a bridge to allow the heat from the iron to flow into the joint easier.
Louis Rossman: "That's not the right amount of flux".
Checking PPBUS G3
hahahahahahahhahahahhahahahhahahhahahahhahahahahhahahahahahahahahaha best comment eveeeer!
I don't know why I watch this shit, but I love it.
I always learn something about retro game repairs from your videos.
Nintendo used to weld those batteries into the circuit board tabs. They should’ve made battery detachable sockets there for standard coin battery replacement. Like the CMOS batteries on the back of the Sega Saturn.
Thanks for sharing this. Had no idea there was a battery inside these carts. I still have some of these. :)
Wow! In depth how to.... this is what everyone needs to see!
Great video, and love the quality of the new camera. You and the entire group are getting me fired up to get back into fixing, once my family and I get moved into our permanent home (in process of getting our current house put up for sale.).
Life brand rubbing alcohol. Tell me you're Canadian without telling me you're Canadian 😂
That was a pretty cool trace repair, learned a new trick from you today.
Thanks for not editing out the solder reflowing asmr
Picture and sound quality are excellent. The new phone is great!
These vids are therapeutic, I swear. Lol.
First 10 minutes if this video.. All I could think was "Please use an eraser on those pins as they are dirty as hell". Then you did it! Very cool watching these videos you.
You can also clean the pins with white vinegar. let it set on the pins for about 3 minutes & then clean it with alcohol. It is great for restoring the shine to the pins.
This is a great video. I have a few snes games (luckily that all still work) but if 1 starts to play up after viewing this I know my soldering skills are enough to sort out problems like this
I always thought moisture would hurt the board. I’ve learned a lot thru this video, thank you so much! I have a few games to try this on.
Nothing that he used was really moist. 99% alcohol dries insanely fast and mops up flux residue.
Pro tip- You can get battery holder that you can solder in to make it so you just bob the battery out and replace without soldering it again.
There are rubber blocks with sanding bits mixed in, they're to polish Guitar frets. That should work wonders with the worn out pins.
The pencil eraser trick works amazing on lots of metallic oxides. I use it on silver coins and is the best way to clean the black silver oxide without ruining the original patina.
I like how easy you made this fix to do, Good Work saving this classic, most people would've gave up, Liked
This is great at putting me to sleep lol, I learn something & have dreams about Mario. Good sht.
A better idea, do not remove the solder before removing the battery. Heat the glob as is because the connection would be better with the extra solder on there and while it's liquid then remove the pin from the board. Then soak up the remaining solder. It would have been much easier. Skip all the mess.
Correct. Also to not use the very edge of soldering iron in these jobs.
Nice to see such enthusiasm in restoring a game into a working condition - you quess it - BUT, I must wonder why you didn't check the capacitors at all?!?
After 26 jears all kinds of residue from this age has gone bad... I NEVER had only a single CAP measuring good from over 10 consoles and over 100 games.
Maybe it's worth a try considering that, too! ;)
when trying to get the battery out, it's often easier to put on fresh solder as you did, then heat-up and use the tweezers like you did, then wick AFTER to clean up the pad's that remain - it's also easier to use the wick once the component is removed...
Cleaning the pins with a small piece of 400A wet or dry sandpaper followed by CFC free contact cleaner works much better. All of my 600 plus Nintendo game collection has been cleaned that way.
thank you so much! i just fixed a broken cartridge that i've had for a year now by soldering some traces.
Excellent, comprehensive repair video. Thanks for sharing.
I would recommend using a fiberglass pen, also called fiberglass scratch brush, instead of a box cutter to expose a trace. It's made exactly to remove solder mask without breaking the traces.
This was so satisfying to watch!
Also, The Source associate here. Just noticed their brand (Nexxtech) of your solder there, if that is the case, that's awesome! Does that mean you're Canadian as well, or you visited one of the stores from over the border?
He's clearly Canadian, Listen to him say 'Out' at 20:00
i learn a lot about soldering which seems to be a dirty word when it comes to noobs like me and doing repairs on electronics haha. thanks for the videos man
hope you didnt learn it from these videos...
FYI, that screwdriver is called a 'line head' screwdriver.
It's a socket driver.
at 11:50ish and 17:51 you can see where theres solder between the traces, and between two pads on the back...
I saw it too... But then noticed that both pads were directly connected to the ground plane.
Did I miss it or did he never actually test his jumper?
Great video, id suggest buying a cheap desolder station. Its a game changer for speeding up repairs.
Yep, that's in the plan. Ive been looking at options
Really enjoying the content, keep it up! :)
Mr. Clean magic eraser also cleans pins very well. It's always best practice to follow up with 99% Isopropyl to clean any residue left in case there was any on the eraser or magic eraser that was used.
Always enjoy your vids and your laid back style. :)
Nice job, next time you use a eraser try a white square one (the cheap kids ones) not the one on the end of a pen and see if you notice a difference between the red and the white, i been using the white now 20+ yrs, thanks for the knowledge
Nice can you show us you trying to fix a broken nes
I've got one i haven't tested yet in my latest mail day, so maybe
RetroRepairs you should definitely do that
He’s got an older video of him fixing one if you can’t wait :)
Super nes not nes dumbo
Go Away I want him to fix a nes not a super nes I know the difference
Force of habit, cr232 swappable battery holder. :)
Learned a lot so far thanks for the videos
Pretty sure you coulda just skipped all that repair garbage and just blown on the contacts. That's how we did it back in the day. Nostalgia tells me it has a 100% success rate.
Quick Tip:
For removing the battery it would have been easier to add more solder to the pins as you did, but instead of wicking the solder away first, it would have been much easier to apply the pressure with the tweezers, apply heat to the pad with that extra solder on there and the pin will pull out easily, as you have more solder to retain and spread the heat to the whole pad/leg. then once battery had been removed you can now use the solder wick to clean up the pad and clear solder from the hole.
Also if your having problems with the solder melting and flowing, turn up the temp of your iron if possible or simply use a larger tip. Should only need to touch the pad for 3-4 seconds to have all solder melted/flowed.
Another tip for cleaning the Cartridge Contacts use a Fiberglass Scratch Brush/Pen they work well, also good for removing the green coating to expose the traces.
wouldn't you want to add solder to each pad so any repair would be more reliable
99.9999% of the time by cleaning the pads with 99% isopropyl you fix every cartridge.
Except when there's broken traces, as was the case here. I've got a GameBoy game that's similarly broken but too bad for me, GB traces are MUCH smaller.
@@SatoshiMatrix1 my pokemon yellow had a Pad lifted up in a chip I touched it with the soldering iron and that fixed it, try to fix your cartrige too.
It's so simple yet so impressive!
bad resolders. you should change your iron
Bad techniques
You are my favorite 'ASMR' videomaker 😅💚
Instead of using an eraser to clean your gold plated contacts check out the fiberglass contact cleaning pen, i have had 1 pack and it lasted me almost 10 years. They are great.
What do you do with all of these games? Good work by the way!
You made my nails peel off with that squeaking of the q-tips 😫
this guy must be a sega user bcs he never used that eject button lol, its really bring back my childhood memory when my friend who is sega user ejected my cartridge by just pull it up hard , im shocked bcs i always use the eject button
That it's a great job, Now I know what to do with my games. !
I have the same problem with 2 games I just bought off ebay and didn't worked, thanks now I know what to do
Thanks for the video! I will definitely be checking out your other videos! You should have tried blowing in the cartridge first though lol. Works every time.
The original save battery may have been ok. I once bought a 'no-save' game with the intention to replace the battery and it turned out to be untested - there were no saves on the cart but once I saved the game, it held.
Bartosz Nowicki be careful,it could fail and leak battery juice because of its age potentially ruining the cart
This was a really great video. I am not really sure why you don't show how to fix a Zelda Cart. Zeldas are the most infuriatingly damaged and the most valuable now. By infuriating, I mean come out of the box not working because of small faults.
GOOD WORK.
Haven't come across one reasonably priced that wasn't working. When I do, i definitely will make a video.
@@RetroRepairs When teaching, always remember showing the most difficult operations, will result in a better understanding of the simpler stuff.
that zoom is amazing, you said that's with a phone ?
I like how he played it off that he trimmed the tail of the wire and you can see that he actually didn't. And he was like, OK. I know super tiny and hard to see, but it was still funny.
What kind of stand do you use to put your phone in?
Killer Queen. It has a nice compartment in it's stomach area
The levels the music the era BEST GAME EVER
Awesome fix and a great game.. big thumbs up.. :) :D
That Q tip squeak is pretty “Gnarly” 👀
Really? Because I think it was "Tubular"! The fact that you can use an eraser to clean the pins is "Way Cool", by the way.
Alejandro Sanz II thanks for tips !!!
Can we all agree we took the cartridge out without pressing eject. Even if you did press eject you must have 1 time where you just pulled it out.