Probably the best off road skateboard I've seen yet. I especially like the bindings. Have you taken it on any mountain biking trails to push the limits?
Nice kneepad, what are they? And do you think I can use the same motors and battery but with 90mm flywheels, for city? I live in a city with a lot of steep hills :D
Was sehr witzig ist, dass ich gerade vor deinem Sturz im Video zu meinem Kumpel meinte, dass ich es sehr gut finde, dass die Sicherheit bei dir nicht zur kurz kommt hinsichtlich der Protektoren und Helm! ;) Dahingehend sind eine Menge Idioten unterwegs im Netz... Geiles Board! Der Kanal könnte nen Push gebrauchen ;) Soon...
I'm thinking about what if you use so called "herringbone" gears? That would be quieter. You could also use "internal" gear. capolight.wordpress.com/2011/01/22/drawing-gears-in-sketchup/ www.robotpark.com/academy/robotic-mechanisms-types-of-gears-51034/
Hey Jens, I have recently bought the alien aps80mm motor mounts from you i have 70kv 6000w alien aps8055 motors in dual rear setup I was wondering if you or anyone else on here has had any experience with the 80mm aps motors as I'm running into the problem that the gauge wire they use is way to small and causing the wires to melt. I'm also running two vest 6 with 2 6s zippy compact 40c 6200mah to each vest for a total of 12s to each vest. Any help or suggestions is greatly appreciated
Hi Jens! your pretty awesome buddy! any luck finding spare motor mount? also, how do I connect the radio controller to the two speed controllers so that it controls both motors at the same time? any advise on where to find a manual or is there a simple way to connecting them?
It's the Torque..He must have had the settings on "Pro" when he should have set it on "Med" on the Remote.He turned and hit the throttle and caused the board to kick out.
Dude, u know what...that you made me spend two summers of pocket money to make a skateboard like yours and im very angry, so........where did you buy that motors? I also want to buy two too.
Really nice Board! I have one with max6 i didn't finish it yet but i would like to know what Was more powerful and easy tout ride? Vesc or max6 (8s) ? Do toi think that there is real différence between 8s vesc and 12s vesc? Thanks Guy and continu like that i love watching your boards!
I have a finished one with max6's and I see no reason to upgrade to a vesc6 unless you wont to underline your status or you need the latest and greatest. I achieve a topspeed of 37km/h on a 6s battery and the controls are spot on after ~600km. (192kv 6374 beltdrive 1:4.5ish ratio)
Thanks. If ya already have the parts then complete your build (-; I´m a big fan of the MAX6 also, used it long time and in many builds... With Vesc you will just have more options, its the future stuff with "live data" app comunication... easy setup changes from 2000W to 50W... stuff like that... throttle curves.. etc ... 8S and 12S on same ESC is big difference...
Thank you for the reply! Btw I just got me a used trampa mountain board with the spring trucks and a couple turnigy sk3-6374-192kv do you know where I can get an affordable motor mount with the pulleys and all? I don't mind if its used also I can choose from twister to rockstar hubs.
Sounds sick! Love how nicely placed those VESC6's are placed in that enclosure!
God damn, i felt the Torque on my keyboard.
haahaha, that things a beast hey
Nice. You maby the Best most extream Mountain board er on youtube
Irre! Und super dass du so vernünftig bist und die volle Montur an hast, bei dem Speed kann das ja echt ins Auge gehen. Unfassbar wie das Teil abzieht
Jo das hämmert gut nach vorne (-; muss sein mit Helm
Dope dude. Sick board. great vid.
That’s just crazy insane!💐
I'm going to get four of those motors and make a little car to ride in.
Probably the best off road skateboard I've seen yet. I especially like the bindings. Have you taken it on any mountain biking trails to push the limits?
looking to build a board soon do you still sell the motor mounts for the chain drive?
Damn man, that shit was crazy. Esp the wheelie. Dope
Thanks Dude
Nice kneepad, what are they? And do you think I can use the same motors and battery but with 90mm flywheels, for city? I live in a city with a lot of steep hills :D
Awesome....which types of motors are you using here?
What is a setup like that usually cost?
Where can I buy this same design and all from’? Thanks
This is damned insane I want build my own skate!! Where did you buy the pieces?
That is amazing
Hi, do you make build for People.? you are amazing rider !!!
Holy shit that is beautiful
How much is is costs?
Was sehr witzig ist, dass ich gerade vor deinem Sturz im Video zu meinem Kumpel meinte, dass ich es sehr gut finde, dass die Sicherheit bei dir nicht zur kurz kommt hinsichtlich der Protektoren und Helm! ;) Dahingehend sind eine Menge Idioten unterwegs im Netz... Geiles Board! Der Kanal könnte nen Push gebrauchen ;) Soon...
Dude that's awesome, can you direct me to all the websites so I can order your same exact board build please?
How much do one of these cost? Or do u build it from nothing? If so then how much did that cost
Can i please know what deck you are using? and is that the mini drive? 1:4 ratio?
echt geil grüsse aus stuttgart
beautiful work man, any idea when vesc6 will be released to the public as open source? :D
Thanks Man, oh no i got no idea...
Great video, add first fall to the title.
hehe (-;
Holly smoke man! It hurted me inside when you fell down, those bindings could be deceiving sometimes!
Easy Dude, nothing happens... helmet and bodyarmour is basic stuff on eMTB
Cheers
Which protection gear do you wear?
Fox Helmet
Dainesse Body Armour and Crash Pant
TSG Knee Pads
Hillbilly Whristguards
I'm thinking about what if you use so called "herringbone" gears? That would be quieter. You could also use "internal" gear.
capolight.wordpress.com/2011/01/22/drawing-gears-in-sketchup/
www.robotpark.com/academy/robotic-mechanisms-types-of-gears-51034/
Yah would be nice but so much more expensive... i dont know any source for it with the right size...
Yeah, I give the 1001 mag ich ;). Great Work! Geilles Teil!
what kind of regulator does it support for this motor with 12s?
Do you have the product link?
Its an VESC-6 sold by Trampaboards.com
Hey Jens, I have recently bought the alien aps80mm motor mounts from you i have 70kv 6000w alien aps8055 motors in dual rear setup I was wondering if you or anyone else on here has had any experience with the 80mm aps motors as I'm running into the problem that the gauge wire they use is way to small and causing the wires to melt. I'm also running two vest 6 with 2 6s zippy compact 40c 6200mah to each vest for a total of 12s to each vest. Any help or suggestions is greatly appreciated
Did u end up getting your 70kv 80mm setup working?
Very nice
Can you make it all wheel drive?
Hi Jens! your pretty awesome buddy! any luck finding spare motor mount? also, how do I connect the radio controller to the two speed controllers so that it controls both motors at the same time? any advise on where to find a manual or is there a simple way to connecting them?
Best is if you ask your setup questions on esk8 -builders
is there any huge difference between these leopard ones and the turnigy sk3 -6374- 192kv?
I think the difference is mainly that the 80mm Motors are running cooler.... so maybe a nice option for heavy riders and/or hot regions
So I know your opinion on the VESC in the past was that you were not really happy with them, what do you think of the new V6?
Great content thanks!
I really like IT
How did you made that
1:59 momentum going forward while board going sudden left . that is what so dangerous about wheels
It's the Torque..He must have had the settings on "Pro" when he should have set it on "Med" on the Remote.He turned and hit the throttle and caused the board to kick out.
Was ist die Maximalgeschwindigkeit?
can I use these motors with a voltage regulator up to 12s?
It is used in this video... VESC6
Can the drive terrain work with the evolve boards?
No sorry
Looks sick! Top speed still 20-24mph???
Vmax is around 50kmh
Do you have a link to the motor mount and gears?
Yes here they are listed :
shop.elektro-skateboard.de/eigenbau-tuning/e-toxx/725/e-toxx-direct-drive-mtb
Or contact me at jens@e-toxx.com
Where you buy deck ?
Nghe tiếng hú thích thật
Hi
Dont understand.
English?
Cheers
Ich hab mal ne Frage, wie lädst du den 12S Akku ? Oder hast du 2 6S Akkus in Reihe und lädst diese individuell ? Also sieht zumindest so aus.
Yap 2 x 6S
how much that board?
just abgefahren!!! thats funmobility in highend
Haha funmobility is lustig !
IT'S A MONSTER
So how do u buy the trampa in the usa?
www.trampaboards.com. We can ship directly to you :)
Does it have possi-tradition? Do the wheels cause a fish tail?
Oh i dont know what ya mean
Dude, u know what...that you made me spend two summers of pocket money to make a skateboard like yours and im very angry, so........where did you buy that motors? I also want to buy two too.
Hehehe
Leopard Motors
8072
170kv
Bought from reisenauer
Happy spending
where can i buy one like this
Trampaboards.com ---- E-Toxx.com
👍😊
How many price
Bindings that electronically disengage. Game. Set. Match.
Really nice Board! I have one with max6 i didn't finish it yet but i would like to know what Was more powerful and easy tout ride? Vesc or max6 (8s) ?
Do toi think that there is real différence between 8s vesc and 12s vesc? Thanks Guy and continu like that i love watching your boards!
I have to precise that it is with 6374 motors aps 130kv
I have a finished one with max6's and I see no reason to upgrade to a vesc6 unless you wont to underline your status or you need the latest and greatest. I achieve a topspeed of 37km/h on a 6s battery and the controls are spot on after ~600km. (192kv 6374 beltdrive 1:4.5ish ratio)
Thanks. If ya already have the parts then complete your build (-;
I´m a big fan of the MAX6 also, used it long time and in many builds...
With Vesc you will just have more options, its the future stuff with "live data" app comunication... easy setup changes from 2000W to 50W... stuff like that... throttle curves.. etc ...
8S and 12S on same ESC is big difference...
No one forces you to change a running system (-;
Jens Kappel okay thanks à lot si i am going tout continu thé building with! I hope it would have as punch as your builds ahah
Thank you for the reply! Btw I just got me a used trampa mountain board with the spring trucks and a couple turnigy sk3-6374-192kv do you know where I can get an affordable motor mount with the pulleys and all? I don't mind if its used also I can choose from twister to rockstar hubs.
Actually i think i got no used parts... will check later
What motors do they use?
Leopard 8072-170kv
Did you can sell me this
Cool
$???
Do you run duty cycle control?
No FOC
Jens Kappel
you got meat om those bones and still have rad torque!
I want the how much
What's the gear ratio?
1:5 Gearing
WHAT SPEED IT REACHES
Around 50kmh
Baust mir auch so eins.?
How to make it... Plzz talking to meee... Plz
Check this Build Log on esk8builders :
www.electric-skateboard.builders/t/e-toxx-directdrive-vs-trampa-vesc6-vs-leopard-8072-170kv-vs-nowind/30822
is fucking amazing!!!
Estoy loco por comprarme uno!!! Soy de Argentina. Cómo puedo acceder a un Skate de éstos??
English?
Cheers
Hola, también soy de arg.
Te compraste alguno al final?
12s 120A could be used with leopard
Yes
no breaks?
Yes it have brakes
Geil man! Was schafft das top Speed ? Beste Grüße
Hey ..... Danke.... so 50kmh rum
reicht.. 50 kmh auf nem board sind bestimmt schon fast zu schnell.. beste Grüße
ja (-; reicht
flat road for this awesome machine ;-)
Dont understand, but hell YEAH (-;
Jens Kappel hahahahaha
How i can get one this
You have to build Dude
Parts list
holy shit
You need a better test rider to really show this thing off...
J.A.M we got u covered ;)
do the donuts
Woo wooo woooooooooooo wooo woo
Wooooo
Feet straps fuck that your falling on dirt or paved road not snow keep that shit
Dont understand Dude?
You must be care. Not play like a child