y’all sayin clear coat left the chat, but he really didn’t take THAT much off. Looks like alot, but trust me, it’s probably got quite a bit left on it. if the clear coat was oxidized all the way through, it would be peeling up, bubbling, be more of a white color, rather than a hazy look to the paint, etc. This is purely oxidized paint, the clear coat is fine.
I'm no detailed but he isn't hanging around in any 1 spot for very long to get it too hot. It seems to me that he is not leaning on the buffer to hard either. That looks like a pretty good shine in the finish too. Overall, that's gonna look pretty slick when he is done. Looks like he knows how to do it right by the way he handles the machine and leaving no marks behind. Not knowing the reason behind the work makes it hard to comment otherwise. May be a job for an old mate, meaning it could just be to make it look better for a few more years, not a show car. Good demo 👍
This is old school 1970’s collision shop method, very fast results, not recommended for beginners. Watch your edges and high spots or you will burn through. I still use this method today: Schlegel 7 1/2” 875D compound, 7 1/2” 904 polishing pads.
Type 1 DeWalt 849, eh? Don’t see those much anymore. Way better than the new ones, and made in America too. I started my detailing business with my 849 in 2008, and it still buffs like a champ. Novices are so scared of them, but that’s what professionals run, not a DA that costs three times as much and takes three times as long to do the same work. Keep shining brother!!
To those of you saying "Clear coat", with a rotary at medium speed on a new car it can take 10 minutes in the same spot before fully removin the clear coat, just so yall know
People in the comments wish they had half the experience enough to operate a polisher like this and not knock the paint clean off. 🤦♂️👊💯 this is no orbital either guys🤣🤣
Everyone’s a detail specialist in the comments lol 😂 . If you know what you’re doing you get great results with a rotary and in half the time These new so called detailers are afraid of using the rotary smh
@lacboiatl Warping from the heat when it cools back down it goes back to its original shape Obviously he knows how to handle that rotary, but that technique is overkill
There's faster ways to get into that hood. Just use a grider or cutting wheel. Oh wait, you're trying a tutorial on polishing and actually uploaded it. Holy crap
Fortunately that is Ford, have the most hard on top coating. Try that speed on Honda, you immediately know that you must repaint after polishing with that tools and that speed 😂
@@sundayd-lite3394 absolutely I do a 2 ft by 2 ft area, lightly and move on, come back after a few minutes and get it to my liking. Always Avoid excessive heat.
The paint was shot a lot of about people judge me of the way I did this. But trust me I been doing this for 22 years. And the customer was so happy. I charge him $100 made it looks way better than what it was and he sold the truck in like 3 days. This will last 8 months to a year I know because the guy the bought its my neighbor 😆
You might think that high pitch screaming is the buffer, but it is in fact the clear coat leaving this realm.
Lmaooooooo
😂
Rip to this mans clear coat
😂 and i think he is to slow. Need higher speed.
Thats the point 🤣
he's doing everything right after sanding
RIP stick to foam pads and prayers my guy 💁🏻♂️
@@timtoontyme91stick to chemical guys bub
You are a bold man to go that high and that long on surface with a high speed buffer. Respect 🤝🏽 subscribed
Thank.you bro lots of people don't see the the difference 🤝
@@sundayd-lite3394 Im a detailer trust me I noticed it at the start of the video!
You're a beast my pait is just like that I'm going to start on mine soon@@sundayd-lite3394
clear coat just left the chat
🤦
😂
😂😂😂😂
I can feel the heat on the paint by just watching this.
Paint thickness before 5.6 mils
After 2.5 mils 😅
y’all sayin clear coat left the chat, but he really didn’t take THAT much off. Looks like alot, but trust me, it’s probably got quite a bit left on it. if the clear coat was oxidized all the way through, it would be peeling up, bubbling, be more of a white color, rather than a hazy look to the paint, etc. This is purely oxidized paint, the clear coat is fine.
"Trust me bro"
@@Chesu360 source, i own a detailing company, and do work like this all the time.
Cutting through your neighbors clear coat.
10/10 for effort... 2/10 for technique 👌
That's the car screaming 😱
I'm no detailed but he isn't hanging around in any 1 spot for very long to get it too hot. It seems to me that he is not leaning on the buffer to hard either. That looks like a pretty good shine in the finish too. Overall, that's gonna look pretty slick when he is done. Looks like he knows how to do it right by the way he handles the machine and leaving no marks behind. Not knowing the reason behind the work makes it hard to comment otherwise. May be a job for an old mate, meaning it could just be to make it look better for a few more years, not a show car. Good demo 👍
A lot of professionals in the chat 😅
This is really good how u can see the difference but to much time in that area
This is old school 1970’s collision shop method, very fast results, not recommended for beginners. Watch your edges and high spots or you will burn through. I still use this method today: Schlegel 7 1/2” 875D compound, 7 1/2” 904 polishing pads.
Very nice 👍
Bro I wanna cry watching this. I'm like "oh no... that's not a DA 😅"
😂😂
Type 1 DeWalt 849, eh? Don’t see those much anymore. Way better than the new ones, and made in America too. I started my detailing business with my 849 in 2008, and it still buffs like a champ. Novices are so scared of them, but that’s what professionals run, not a DA that costs three times as much and takes three times as long to do the same work. Keep shining brother!!
🫡🤝
It's like opening a portal to another world on his hood
Yes sir thx customer was impressed and really happy 😁😊
Brushes sounds good mate
Mister swirl king 👑
Wow, that color coat is leaving the chat as i watch this
One thing ya never do! I’d go completely flat like that!😂
You could barbecue off that hood for the next 8 hrs now.
I’m dying of laughter wtf bro make some breakfast on that motherfucka non stick 😂😂😂😂
That drill sounds like my window xp computer from 2005
When you try to sound smart but don't know the difference between a drill and an angle grinder.
To those of you saying "Clear coat", with a rotary at medium speed on a new car it can take 10 minutes in the same spot before fully removin the clear coat, just so yall know
That machine screaming "put me out of my misery"
Made the base shine with that speed lol much props tho
No swirls? I use a water spray bottle to keep it wet. Less swirls when it's done.
Nop bro nothing
Man that was truly awesome. What product did you use?
3m
What the correct way to buff, and for VW tequan white in color and what was to use?
how deep was the scratch on that clear coat that you needed to do 14 passes in 1 spot😭😭
People in the comments wish they had half the experience enough to operate a polisher like this and not knock the paint clean off. 🤦♂️👊💯 this is no orbital either guys🤣🤣
Maybe lil grease in them bearings brother
I can’t believe I see that in the corner !!! Wow
Everyone’s a detail specialist in the comments lol 😂 . If you know what you’re doing you get great results with a rotary and in half the time These new so called detailers are afraid of using the rotary smh
🤝🙏
What are you doing to that poor vehicle. Whoa dude.
The wool pad is already red 😢 RIP CLEAR COAT
This paint isn't cleared ;)
Kitna different
aa jata hai yaar
He's showing us how to melt his clear coat for a shinnier shine
I’m not even proficient at rotary and I can tell clear coat is off into the sunset 😂🎉
R you trying to strip the clear cost may as well use sandpaper
Bro hit paint😂
Is that sound of the car crying?
Hey I think the buffing pad is pink
Hey bro good shit…did you wet sand before?
Slow that thing down about 85%!
Waaay too many RPMS
looking really good. it that the polish stage or just compound??
Just compound bro 🙏😊
@@sundayd-lite3394 jesus christ
Goodbye, goodbye. My friend, goodbye 😂😂😂 clearcoat.
That’s enough SLICES
Now let’s see that pad 😂
Just the scream of that, ouch
Clearcoat demolished lol
You can see the panel warping from the heat 😮
It's warping? Or flexing from the pressure? The spot he's doing looks a night a day difference
@lacboiatl Warping from the heat when it cools back down it goes back to its original shape
Obviously he knows how to handle that rotary, but that technique is overkill
RIP clear coat
There's faster ways to get into that hood. Just use a grider or cutting wheel. Oh wait, you're trying a tutorial on polishing and actually uploaded it. Holy crap
What did you charge for the job and how long did it take thanks
Took me 1 full day
@@sundayd-lite3394🤣🤣
Kembali muda lagi
Do not let that man buff your car burning that shit . For hit to move to other spots OG
whoa 🤯
The oxidation on the rest of the hood is rough!!!
To hard and to hot for that clear coat! R.i.p.
Way too high of a setting on that buffer 🤦🤦🤦
🔥🔥🔥
If a microwave could detail cars
I bet your mom can microwave me 😂😂😂
@@sundayd-lite3394 LMFAO!!!!!!!!😂😂😂😂
What sand should be use before buffing with rubber compound
1500+2500+3000
Fortunately that is Ford, have the most hard on top coating. Try that speed on Honda, you immediately know that you must repaint after polishing with that tools and that speed 😂
That truck hasn't had a clear coat in years
Is gadi ki ye last rubbing hai iske baad rubbing hogi to primer cot dikhegi 😂😂😂😂 ye to havvy driver hai polisher chalane me🎉
Bro wtf
Videos sped up his clear is fine lol
It burns
Then there was just paint !
Guys been polishing the floor under the car for the past 5 minutes, RIP Bonnet
Rpm too high
5 years later, he half way done 😂
7 years to be exact 😂😂😂 🤝
Kya yeh minor sketches mitaa dega
How not to polish…
This is painful. I'm sorry but damn.
Kya price ajata h rubbing m
😂 rocks
The commenters here have no clue what's going on with their statements.. .
RIP CLEAR COAT! Very Hot!!!!!
i dont think you buffed enough. Gotta for for longer and more harder.
Next time I'll do that thank you 😁
Rubbing polish. Metterial company name pls send me
3m stock just went up after the amount of compound this guy used 🤦🏼♂️
Address n price
Need to move more you’re going to burn the paint
Will do next time sir thank you 🙏😊
@@sundayd-lite3394 absolutely I do a 2 ft by 2 ft area, lightly and move on, come back after a few minutes and get it to my liking. Always Avoid excessive heat.
Hey, bro, you got time to do mine next?
Thank you bro 😊
That's Not a DA Broooo 🤣🔥🔥🔥🔥🔥🔥🔥🔥
I need buy products
Pilapan nhi ja raha compoind v krwa di gadi
Your going too fast to many rpms
Sick 😅 niedozwolony sposób
So after this did you usd the other bottle that came with the kit? Also what pad are you using please!
Also did you wet sand first
I did polish and than wax sealed. Wen u get this 3m perfect it kit it shows wat pads to used
@@sundayd-lite3394 what about wet sanding. Did you perform any wet sand first.
@@stephenm6036 just with 2500 grid and water. Soft don't go to hard. U be fine ☺️
@@sundayd-lite3394 what if I just used this 3 step kit without wet sanding first. It's on a brand new paint job.
Trying to learn how to buff anybody plz🙄😩
The results are so amazing
How long will that shine last?
The paint was shot a lot of about people judge me of the way I did this. But trust me I been doing this for 22 years. And the customer was so happy. I charge him $100 made it looks way better than what it was and he sold the truck in like 3 days. This will last 8 months to a year I know because the guy the bought its my neighbor 😆
I didn't see nothing wrong with handling it that way, gotta do what you gotta do. and if it works, fuxs it.
@@Dennismadeacomment customer happy I was and I did got lots of customers by his truck
Why 😭
Ever heard less is more?