Excellent video for a novice like myself...Just purchased a 2014 John Deere 1023E with 435 hrs for the Cottage. Hope it will save my back in the long run since I am now 69. Knowing how to make this machine last as long as I can through lubrication is key....thanks a bunch.
I just bought a new 1025R and watching these videos and others, I see JD must be listening. Many of the older “fixes” or upgrades have been incorporated into my 2023 model. Also, my JD dealer will come out and do all of the service on my tractor at my house! I’m kinda like “Oddball” in Kelley’s Heroes…..”hey man I drivem, I don’t knowhow to fixem! Beside JD here is a mechanical genius…” …..great videos……
While I have more tools than most people I am a diesel mechanic, I have the Snap On cordless grease gun. I worked for a local landfill for 10 years and greasing a full size excavator would take 3 tubes of grease if it is greased properly, so the hand deal is somewhat cumbersome. I was really pleased to find that I could adjust the tracks on both dozers and excavators with the cordless as well, they would usually require a air powered grease gun. I also found that fittings that were stuck would open up to take grease where a hand gun would not push the grease through the fitting. When you store your grease gun pull the plunger out and lock it in the cap as if your replacing the tube, this will keep the spring pressure off the grease and the grease will stay on the right side of the plunger. They also make a needle that can get into tight places, they are a bit tricky to use however they work quite well.
I use an old gym sock over the tube of the grease gun, a lot less mess and keeps my hands from slipping on the smooth surface of the tube when I am holding it. I really enjoy your videos, please keep them coming!! big fan in West Fargo, ND
hi I live in Illinois enjoy your videos I'm 55 years old, a dialysis patient and am bed bound. I'm always on the lookout for you next video.Keep them comming. you must a very 3ell paying job to have very nice home and car and tractor and equipment
+oley94 I really appreciate your comment. We're really glad to provide some interesting entertainment for folks like yourself. I'm sorry to hear that you can't get out. Of course, this time of year, it is too cold to do much anyway! Yes, God has blessed our family, and we try to be careful to spend/invest or money wisely. Hope buying Johnny wasn't TOO stupid!
Tim, first of all thank you guys for doing these videos, it helped me make the decision to purchase my series 1 last summer. as for grease, everyone has a favorite, I used Castrol HD Ag grease for years working as a mechanic on industrial equipment, excellent grease however now because I no longer work in that field my grease suffered the same fate due to not being used every day, I switched over to a High temp / pressure grease "Red Line Synthetic Grease 80402" I've not had the that issue since and I use about a tube or so per year so cost isn't that much of a factor. personaly I'm not a fan of the lock n lubes because of there size, a good Lincoln gun and a properly adjusted end works just fine for one handed operation. I do suggest changing out the hose to one that's about 3-4 foot in length, makes placing your grease gun flat on the floor for easy use. Have a great day.
Thanks for checking in. Happy to have you viewing our channel. I think you've identified the cause of the grease separation. ... TIME ... I just don't use much grease. Having said that, there was something else wrong with my gun. I was getting grease squirting out the back (not just separated liquid). I think the plunger wasn't working properly. Some other folks use multiple grease guns, one with lock-n-lube, one without. I could see that. For my needs, the lock-n-lube is great. I can understand how others might see differently.
You keep your so clean I'm surprised you did not wash it when you had it apart. I bought half a 2013 Kenworth OTR tractor this past week; yup Dad's a sucker when the Mack had a catastrophic failure. First thing my son in law did was power wash the engine; makes it much easier to spot leaks! Whomever owned the truck took immaculate care of it and really took care of the interior since the seats were as soft as butter. Message to all that see your video: take care of your equipment as Tim does and it will last until you determine to change it out.
I've been learning a lot from watching your videos I just got a little John Deere tractor 1025r and I'm anxious to learn how to really use it I never having a tractor before your videos help out greatly
hi tim, thanks for info about turning flywheel, what i did was make that hole in the cross member a bit bigger with a step drill , it is now about 1 inch , next secret was i bought a 1/8 pipe coupling and a 6 inch pipe nipple ,added that to the 4 inch on a mini grease gun and it was easy to get to zerk and pump solved that front ujoint horror show deere needs some engineers who have worked on stuff in real life , hope it helps
I came back to this video to see if I was missing any fittings to grease. It seems that the power steering ones are gone on mine(purchased spring 2019). Also, the black panel seems *much* more attached than those 4 screws on mine.There is a pop out panel on the bottom right, but that gives no access to the shaft. Maybe I overlooked something silly simple. Fortunately, I was able to get it without too much hassle through that tiny hole in the bottom. I used an oak dowel to turn the shafts and expose the fittings, rather than by hand. My elbow doesn't like those motions since I tore some ligaments a bit. Even using the flywheel to turn was too much for it :( I've been religious about greezing my mower deck, loader, three point, and my attachments, but had completely neglected the shafts till now (147 hours), I'm a bit ashamed to say. Basically I forgot that there were U-joints under there. The fittings needed 1-1.25 squeezes to push new grease out and make that particular sound that lets you know it's good. I'm coming up on my 200 hour service this winter, so I'll be back for more of your videos to make sure I do it right, thanks!
Tim - thanks a LOT for this video..... your suggestion to 'hand-turn' the flywheel to gain access the 'upper drive shaft' zert saved my bacon. The zert was at an odd angle that would not allow me to get the grease gun coupler onto the zert. After aligning the zert to the access hole on the frame, I had no problem getting the coupler onto the zert and lubricating that and the rear zert of that driveshaft - - didn't really see a need to disassemble the panels..... but great optional information.
Good info - I had given up on front main drive Zerk fitting. Really liked all the challenges, out of grease, grease leaking to the floor, new gun leaking - I was thinking, hey, I'm not the only one.
Might be time for my 50 hour hydraulic filter change. 50.5 hrs. Think I missed some grease fittings last time around too. Thanks for the how to videos. Your a great help.
I have been using the Lock and lube for several years and love it. I do have a few other ends for my grease gun for tight spots that sometimes the lock and lube may be to large for. Just fond your channel a few days ago really like the content and you guys seem like a great family' I have a large and small squeeze lever like your new one and like them but most of the time I use an air powered pneumatic grease gun and really like it. Its just faster.
Another great video Tim. If you know of anyone looking for a 2022 JD 1025r loaded with heated cab, loader, bucket, seat cover(never used) I-match with weight bucket for the back, around 40hrs on it, 54” drive over deck with load and go attachment to lift deck up to clean and service blades, chain hooks on bucket, mini fan for $29,500 please let me know. I’m in Michigan. Again thank you for literally step by step how to videos. It’s very very much appreciated more than you know. God Bless you and your family.
Tim, I appreciate the video tutorial on greasing the shafts and universal joints on the 1025R. However, things have changed on the newer 1025Rs. Some of the zerks you show here have been designed out of the newer tractors and there is no top access to that universal zerk at the back of the engine. It is now limited to just the small access hole under the tractor. It would be helpful, since you have a great series of videos in your collection and your knowledge of the 1025r/1023 is extensive, if you would use a newer model 1025R. Maybe get John Deere to give you a real 'good buddy' price, since you've been singing the praises of the 1 Series tractors for as long as you have.
I pulled my hair out with the same grease fitting you had problems with Tim. When I had my JD 1025R in to have power beyond hydraulics installed I had the service department increase the size of that opening - problem solved. The amount of time and frustration saved is unbelievble. Every dealer should simply increase the size of that opening as part of pre-delivery until John Deere makes a change.
Tim, Lock N Lube makes a grease gun barrel cap to capture the leaks from the following rod on manual grade guns. Fits on all of my manual guns (Alemite, Lincoln and Lock N Lube). Works great, and doubles as a priming bulb. Comes in multiple colors if you want to coordinate with the grease that's loaded. FWIW, a good grease gun (Alemite, Lincoln or Lock N Lube) helps but they'll leak if stored long enough with a cartridge in them. I like my Lincoln and Alemite guns, but I find myself reaching for the Lock N Lube more these days if only for the convenience of the Zerk fitting on the gun that I can latch the coupler onto during storage. No idea if the Lock N Lube gun will last as long as the Alemite and Lincoln guns I have. All manual guns leak, even with the highest grade greases. It's just a matter of time. If you go through a lot of grease, you're much less likely to observe it. But for those of us that don't use more than a single 14 oz. cartridge in a year, and store our gun in an area that can get hot (or gets sunlight), the gun is going to leak. The ones I've seen leak a ton on someone's floor have been due to the user not releasing the following rod, and/or leaving a gun for a long time with #1 grease in it. My own worst case was getting out the gun for spring maintenance and having it dump all over my mowing deck belt. That's when I bought the Lock N Lube barrel caps.
hey Tim I'm fairly new to the channel to but a 40yr mechanic... cleaning of zerk fitting with finger or rag is a very good idea.. also the slop you had in the driveline looked to be a yoke to pinion but loose... that can become an issue down the road... something to take another look at... once the preload on the output brg gets to much play the cost goes up... there's a toqure spec on the nut that holds the yoke...
+John Hammack a quick survey on GTT showed that all 1-series tractors get this slop in the driveline. Not saying it is good, but apparently it doesn't typically go bad. Thanks for your comment! Glad to have you watching our channel!
Hi Tim, I have a needle fitting for my grease gun that is about 6 inches long and connects to your lock and lube or just the end of the hose. With it you can stick the end of the needle right into the ball of the zerk and then pump grease into the fitting. I had to have it to grease all my universal joints on my 82 CJ7. Since you were under the tractor and had the zerk visible. Also if the grease separates and leeks out of the gun, it will do the same thing inside the fittings. Just a thought. I love your videos.
Make sure you get that front driveshaft joint! Didn't get mine as often as I should have over the past 8 yrs on my 2012 1023E. U-Joint broke and began rubbing against the power steering lines. Not fun to loose your steering on a hillside with a compound angle while you're mowing. Big expensive mess. Wish I would have known about removing that lower panel. Good news I now know how to remove the dash and all the other panels to get inside and clean out all the dirt and grass. Also, my rear MFWD is very sloppy after 8 yrs.
Hey Tim, just wanted to say Thanks. I finally found this video again. I've been looking for that piece, the LocknLube and just ordered it. I hate greasing too. I really treated myself and got a pneumatic grease gun. It blew up the lousy connectors on the old gun. Maybe the compressor is turned up too high. I'm going to do maintenance soon. Now I've got this one saved.
Have you seen any Rust developing in your Gas Tank? Just inside the stainless steel area where the cap screw in, just below the level of the cap, rust has developed and that's what blocked up my fuel filter. It's been reported to Ag-Pro and John Deere. I'm waiting to hear from them right now.
Good job! I have 2 grease guns. One with the lock-N-lube and one with a needle nose. I use the needle nose for that hard to get at fitting. Pistol grip is the way to go and even though I'd like a battery gun I can't justify the cost. My guns leak too. Have found that it's easier to pull the bottom handle back to lock it in place if you do it before unscrewing the top handle part. Doing that is when I'd like a battery grease gun. I think it would be easier. Last time I changed the grease on mine I was ready to throw it away. Hope you're not snowed in. :-)
Tim, I have a Lincoln grease gun with lever pump and don't remember having that much trouble like you are with that old one. Sometimes cheaper isn't better.
Love my Lock n Lube. I too did not like the long handle and went with the pistol grip, however ai went to a Lucas Oil Pneumatic. I had the same reservations on the battery operated, main concern was a few years down the road the battery would cost $90 to replace, figure the air supply was a lot easier. I also found it has enough power in the pneumatic to blast through a rusted up fitting like on some of my used implements. Next video going to be greasing the H120? I like to grease everything at the same time, keeps me sane.
Tim the heavy equipment and ag grease has better moisture protection and better protection around rubber boots on tie rod ends and ball joints than the multi purpose grease that can degrade the rubber
FYI.... When you grease the hard to get to zerk.. I suggest to put a paint make on the flywheel.. Lining up with the zerk fitting.. It makes it easier to find it next time you grease it.. Nice clip
Hello Tim. I was a little concerned that the play in that one spline connection was enough to be visible. Rotate that shaft or use your video to inspect it for cracks. The shaft and splines coming off that pump are so small that 2x the amount of play as yours demonstrates would be failure. I had to replace this shaft assembly with only 300 hours on my 2320. Mine was due to universal failure that resulted in yoke damage. The new assembly universals also refused to take grease. So I disassembled the new universals, filled the cups with grease and put it all back together. The seals or end tolerances on the new universals are so close that only 1 of the 4 cups was allowing new grease to enter. I would have shown this to John Deere but they weren't interested. A failure of a universal at 300 hours, relative to a car, 300x45mph=13,500 miles. I've heard of these failing with half the hours I had.
Thanks for the video Tim, I am having a lot of trouble greasing that main front drive shaft, have taken the fenders off and the bottom panel also the floor or mats what ever it's called. I bought a industrial battery powered grease gun when I got my john deere , but I agree with you now I did not need to do that, should have invested in a locking grease gun in.
Great! I would recommend that you buy high quality grease. I believe the 'cheap stuff' is what separated for me. Still 'multi-purpose', but go with a little higher quality.
Just a heads up, I heard from an old timer that if you mix grease types it can leak like that because of different compositions from different companies. It does this in your stuff you're greasing too. I would stick to one type and grade and that's it. Nice job with the video. Like others said clean your fitting first.
Hi Tim, I like your videos but do have a couple of comments about this one. You should wipe off the dirt from the grease zerk prior to putting your coupling on it so you don't pump dirt into the zerk. Also, do you think if you had a better grade of grease you wouldn't have such an issue with it running out of the grease gun. Just wondering.
+Andy Grimm not too worried about the dirt. Especially when you think of how much grease gets pushed through on each pump. You likely have a good point on the grease. I'm wondering if this grease 'separates' easier than some other grease???
We use the same brand grease on a commercial scale only the tube is black and red not black and green(grease itself is red), never had a problem with it leaking out of our Milwaukee grease gun!
It's the gun. I had that same cheap gun. Started leaking from brand new. Threw it away after one tube of grease. Got a 20v dewalt cordless grease gun to replace it and never looked back. Very pleased with the purchase. Not the cheapest gun around, but worth it.
Have you seen the grease gun the guy on Good Tractor Works recommends? It uses grease that is in a canister, the grease is self contained. Looks like a great idea, not sure of the cost.
On our farm we use John Deere Multi-Purpose SD Polyurea Grease TY6341 does not separate like other brands can over time. Also rubber seals will react too different types of grease. Seals can get soft or hard causing them to leak.
I re-watched this recently to remember how you removed the cover down below the instrument panel/steering wheel. It seems that's no longer a separate piece on my 2016. I have one small access panel on the right side, but that's it.
Tim I don’t know how you you got that lock and lube on the hidden fitting. I have small hands and still really couldn’t get in there. I am glad I ran into this. I totally forgot about this one and haven’t greased it in probably 400 hours. I grease all the time. Too much if anything as I just forgot about this one dor some reason. Lock and lube works great everywhere else but not here at all from the bottom. Have to start over tomorrow and may go get a needle fitting. This is just Asinine by JD!!!! Mines a 2013 btw
I liked that video, and I totally agree about drippy guns. I have one and it leaks so I tie rap a rag to the bottom. Gotta grease but I too won't buy a battery grease gun, and I don't really guess why they sell so many different grease options but I do like the red stuff.
Tim, super informative. Thanks! However, call me anal retentive if you like, but I was always taught to wipe the surface of each fitting prior to the attachment of the gun and installation of grease. My grandfather was particular about our farm equipment and seldom had anything break. Great videos. When my wife questions me about our 1025r, I always find the explanation to her question in one of your videos which saves time and discussion. Great job.
Great video. I enjoyed it. It is important to grease things for sure. Do you think you're going to do a greasing video on the loader and the mower deck? I could have missed it if you've already made one.
Thanks Tim! Love this video. I just found your channel here and have been watching your videos. I have this 1025 and have for a couple years few years now. Love it. Was always wondering if I greased correctly and this video showed I missed a few areas. I don't have any pto attachments yet. I have a front end loader and backhoe. I grease those regularly. Questions: should I grease the pto points even though I don't use that yet? Should I remove squirted out grease when it builds up? Particularly on my front loader and backhoe?
I think the issue with dripping is the grease itself breaking down/separating while in storage. That us the primary reason I went to the one handed mini grease gun. Much smaller grease tube, that I'll use up (hopefully) before the grease begins to breakdown.
Nice video. I would add that the zerk fitting tip should be wiped off before adding new grease. If your pushing dirt that’s on the zerk into the joint that’s just helping to wear out the joint sooner.
I found that it didn't matter what type of grease gun I had they all leaked. I also found that pulling the T-handle out before taking the oyjrt end off there is little or no grease coming out. then take the top end off. I found that releasing the T-handle and pushing it in will eject the m-ty tube then just pull the T-handle back out and load the new tube. Also the warmer the air temp is the more they will leak also. I'm always wiping my gun off because of leaking grease, It's just something you have to get used to.
Not sure what year your 1025R is, Mine is a 2016 and I can't remove the interior cover to get at that grease joint as you show. My boot has the 4 bolts you show as well as 4 bolt that secure the boot to the floor. It actually looks like this is a one piece console, which I didn't care to try to remove.
Thank you for this! I used your video because I forgot where the dealer told me all the zerks were 6 months ago on my 2018 model. I know there was a few changes in the new model, such as the rubber boot has a hose clamp with a huge plastic wingnut on it, and obviously the side panels are tool-less; but the most significant I've noticed is that you can no longer remove that bottom cover on the dash to access the u-joint. It is all one complete piece now. Well, there's also all the steering components being sealed now as well. That's a huge downgrade in my eyes.
I know this is an old video but II have a recomendation: wipe off the zert fitting before attaching the lock and lube. This keeps the lock and lube from forcing dirt into the joint. In extreme cases the dirt can "freeze up" the zert and it will need to be replaced. Some people will say that this is @#. However, I learned this from a pro mechanic.
Video was helpful Tim, thanks. Just bought a 1023e used and greased/greazed everything. Fitting pulled out on power steering, ever had that happen? It goes back in but can wriggle it out pretty easily
The home versions are resistant to scratching but not scratch proof. There are some commercial products I have seen. Just research it. One I have seen is armorpoxy.com/armorultra/?gclid=Cj0KCQiAtJbTBRDkARIsAIA0a5Ng3b5pFrax3ng2j-7wzR-l968ojdUDGCyfKF1vCNOlT31BCDDc_TQaAvB5EALw_wcB
Tractor bootcamp here, just wondering if there is an easier way to line up the zerks facing down on the u-joints without moving the tractor? Thanks Great vids by the way!
Even with the wheels off the ground you won't rotate the main drive shaft unless the engine is running. Drive shaft is connected to the engine. The front wheel drive shaft will turn with the wheels.
+blue87fj60 I should have directed you to my website. I have it linked in my latest post. ...and if you add to cart from there, I get a few cents! Thanks for watching!
I'm not sure what the temperature was when you shot this video but something does not seem right with that grease. I store my tractor and grease in an unheated/uncooled shed which can get 100+ degrees in the summer and I've never had any of my grease guns squirt out juice like that. I use JD SD Polyurea in both gun (pistol grip and lever type). Perhaps other can comment if it is a characteristic of certain types of grease.
EOSJOE I have a similar set up as you and in the 8 years of using the JD grease I haven't had any of the leaking issues. Years before I had the issue with oil separation with other brands. Used to have to wrap the gun in a rag and bag it. Then while using it I did the old sock thing mentioned above. As far as deciding to use another grease than JD brand it is OK as long as it matches specifications. When I got my tractor, for convenience, I had everything required for two years worth of preventative maintenance put in the deal. So that is how I got to experience the difference of JD grease.
I do agree any grease is better than no grease, But when it comes to bearings And mower spindles I always use A lithium base high temp grease. It not only works well for high temperatures , But it also helps shed water And corosion.
When greasing the spindles on the mower deck, how do you know when you have enough. Since spindles are basically just a hollow tube with a smaller shaft and two bearing, are you to pump grease in to fill the hollow tube? If so, how do you know when you have enough? Will it start squirting out?
Thank you Tim. Question: You say it was your "lucky day" because the grease nipples on the 4w drive shaft were facing the right way for greasing. How can I turn them if they are not facing the right way?
I can't find all of the Zerks on my 2017 1025 R. Doesn't seem to match any videos I can find. I can't find a diagram online either. Ps. You need an Iowa sticker to go over that Illini one ;)
Tim, great video! I agree with the pistol grip grease gun! It makes everything a lot easier. I also have the lock and lube. Don't really care for it. It's too big to use when I'm trying to grease the front end of my 4x4 truck. Can't reach the zerts! Sometimes I think a metal tube instead of the flex hose is the better way to go. Great job!
+Steven L mine are 46. I bought used, and they had a special deal on these 3 rusty uprights. I would choose 42 or maybe 36 if I were to select again. These racks are made so that the same beams can be used on different width uprights.
I can understand with dollies you use I might try Harbor Freight dollies, I was just worried about weight on the bar and bending it. Thank you for the response and your videos.
I see you put your tractor on blocks for this, my question is want size blocks are you using? I’m also thinking your driving up on the blocks? As a new tractor owner, I know my questions sound may sound odd, but I a safety nut.
I used 6x6’s. I took a chainsaw and cut an angle on a 6x6 so that I could drive up. ...at least for the rear tires. You can use the loader to raise the front tires.
My brand new 2021 JD 1025R TLB manual does not show where to lube and maintain the JD. What is up with that? That being said thanks for the video. I guess JD wants your stuff to quit working so they can replace it? Any options on a chart to show all the lube points?
Is there a secret to turning the fly wheel in order to gain access to the zerk at the front end of the drive shaft/ The gear shift is in N and it's in two wheel drive - The wheal appears to be locked - any ideas?
Excellent video for a novice like myself...Just purchased a 2014 John Deere 1023E with 435 hrs for the Cottage. Hope it will save my back in the long run since I am now 69. Knowing how to make this machine last as long as I can through lubrication is key....thanks a bunch.
I just bought a new 1025R and watching these videos and others, I see JD must be listening. Many of the older “fixes” or upgrades have been incorporated into my 2023 model. Also, my JD dealer will come out and do all of the service on my tractor at my house! I’m kinda like “Oddball” in Kelley’s Heroes…..”hey man I drivem, I don’t knowhow to fixem! Beside JD here is a mechanical genius…” …..great videos……
While I have more tools than most people I am a diesel mechanic, I have the Snap On cordless grease gun. I worked for a local landfill for 10 years and greasing a full size excavator would take 3 tubes of grease if it is greased properly, so the hand deal is somewhat cumbersome.
I was really pleased to find that I could adjust the tracks on both dozers and excavators with the cordless as well, they would usually require a air powered grease gun. I also found that fittings that were stuck would open up to take grease where a hand gun would not push the grease through the fitting. When you store your grease gun pull the plunger out and lock it in the cap as if your replacing the tube, this will keep the spring pressure off the grease and the grease will stay on the right side of the plunger. They also make a needle that can get into tight places, they are a bit tricky to use however they work quite well.
I use an old gym sock over the tube of the grease gun, a lot less mess and keeps my hands from slipping on the smooth surface of the tube when I am holding it. I really enjoy your videos, please keep them coming!! big fan in West Fargo, ND
Thanks Viking! Good idea.
Keep watchin them, we'll keep making them.
Thanks for the videos! I just ordered my 1025R and being a novice I really appreciate all the help I can get.
+singgrom congratulations! Welcome to our channel!
hi I live in Illinois enjoy your videos I'm 55 years old, a dialysis patient and am bed bound. I'm always on the lookout for you next video.Keep them comming. you must a very 3ell paying job to have very nice home and car and tractor and equipment
+oley94 I really appreciate your comment. We're really glad to provide some interesting entertainment for folks like yourself. I'm sorry to hear that you can't get out. Of course, this time of year, it is too cold to do much anyway!
Yes, God has blessed our family, and we try to be careful to spend/invest or money wisely. Hope buying Johnny wasn't TOO stupid!
Tractor Time with Tim thanks for the info.
Yes .... You are great for us old disableds .... Who just CAN'T ..... :)))
Thank you!! :)
+Marshall Man thanks for watching!
Tim, first of all thank you guys for doing these videos, it helped me make the decision to purchase my series 1 last summer. as for grease, everyone has a favorite, I used Castrol HD Ag grease for years working as a mechanic on industrial equipment, excellent grease however now because I no longer work in that field my grease suffered the same fate due to not being used every day, I switched over to a High temp / pressure grease "Red Line Synthetic Grease 80402"
I've not had the that issue since and I use about a tube or so per year so cost isn't that much of a factor. personaly I'm not a fan of the lock n lubes because of there size, a good Lincoln gun and a properly adjusted end works just fine for one handed operation. I do suggest changing out the hose to one that's about 3-4 foot in length, makes placing your grease gun flat on the floor for easy use. Have a great day.
Thanks for checking in. Happy to have you viewing our channel.
I think you've identified the cause of the grease separation. ... TIME ... I just don't use much grease.
Having said that, there was something else wrong with my gun. I was getting grease squirting out the back (not just separated liquid). I think the plunger wasn't working properly.
Some other folks use multiple grease guns, one with lock-n-lube, one without. I could see that. For my needs, the lock-n-lube is great. I can understand how others might see differently.
Tim!!! I noticed at the end the tubes you built with wheels for your pallet forks. Great idea! I am going to build some for my forks. Thanks!!!
You keep your so clean I'm surprised you did not wash it when you had it apart. I bought half a 2013 Kenworth OTR tractor this past week; yup Dad's a sucker when the Mack had a catastrophic failure. First thing my son in law did was power wash the engine; makes it much easier to spot leaks! Whomever owned the truck took immaculate care of it and really took care of the interior since the seats were as soft as butter. Message to all that see your video: take care of your equipment as Tim does and it will last until you determine to change it out.
I've been learning a lot from watching your videos I just got a little John Deere tractor 1025r and I'm anxious to learn how to really use it I never having a tractor before your videos help out greatly
Thanks Steve!
Thanks Tim, I love your videos and appreciate the extra time you take to do them for the rest of us!
hi tim, thanks for info about turning flywheel, what i did was make that hole in the cross member a bit bigger with a step drill , it is now about 1 inch , next secret was i bought a 1/8 pipe coupling and a 6 inch pipe nipple ,added that to the 4 inch on a mini grease gun and it was easy to get to zerk and pump solved that front ujoint horror show deere needs some engineers who have worked on stuff in real life , hope it helps
I came back to this video to see if I was missing any fittings to grease. It seems that the power steering ones are gone on mine(purchased spring 2019). Also, the black panel seems *much* more attached than those 4 screws on mine.There is a pop out panel on the bottom right, but that gives no access to the shaft. Maybe I overlooked something silly simple. Fortunately, I was able to get it without too much hassle through that tiny hole in the bottom.
I used an oak dowel to turn the shafts and expose the fittings, rather than by hand. My elbow doesn't like those motions since I tore some ligaments a bit. Even using the flywheel to turn was too much for it :(
I've been religious about greezing my mower deck, loader, three point, and my attachments, but had completely neglected the shafts till now (147 hours), I'm a bit ashamed to say. Basically I forgot that there were U-joints under there. The fittings needed 1-1.25 squeezes to push new grease out and make that particular sound that lets you know it's good.
I'm coming up on my 200 hour service this winter, so I'll be back for more of your videos to make sure I do it right, thanks!
Tim - thanks a LOT for this video..... your suggestion to 'hand-turn' the flywheel to gain access the 'upper drive shaft' zert saved my bacon. The zert was at an odd angle that would not allow me to get the grease gun coupler onto the zert. After aligning the zert to the access hole on the frame, I had no problem getting the coupler onto the zert and lubricating that and the rear zert of that driveshaft - - didn't really see a need to disassemble the panels..... but great optional information.
Good info - I had given up on front main drive Zerk fitting. Really liked all the challenges, out of grease, grease leaking to the floor, new gun leaking - I was thinking, hey, I'm not the only one.
You were spot on my friend. Thank you for a wonderful video that made my greasing job super easy except for front drive shaft.
Might be time for my 50 hour hydraulic filter change. 50.5 hrs. Think I missed some grease fittings last time around too. Thanks for the how to videos. Your a great help.
So Tim. Just did my 50 hour change. Your right those little clips on the hose has got to be the worst part. At least it's done for a few more hours.
I have been using the Lock and lube for several years and love it. I do have a few other ends for my grease gun for tight spots that sometimes the lock and lube may be to large for. Just fond your channel a few days ago really like the content and you guys seem like a great family' I have a large and small squeeze lever like your new one and like them but most of the time I use an air powered pneumatic grease gun and really like it. Its just faster.
+nashguy207 welcome to our channel. Yes, I would use a battery powered gun if I had much greasing to do.
Another great video Tim. If you know of anyone looking for a 2022 JD 1025r loaded with heated cab, loader, bucket, seat cover(never used) I-match with weight bucket for the back, around 40hrs on it, 54” drive over deck with load and go attachment to lift deck up to clean and service blades, chain hooks on bucket, mini fan for $29,500 please let me know. I’m in Michigan. Again thank you for literally step by step how to videos. It’s very very much appreciated more than you know. God Bless you and your family.
Very informative for a new tractor owner like myself. Thanks.
+Bo Knows thanks Bo. Glad you liked it!
Tim, I appreciate the video tutorial on greasing the shafts and universal joints on the 1025R. However, things have changed on the newer 1025Rs. Some of the zerks you show here have been designed out of the newer tractors and there is no top access to that universal zerk at the back of the engine. It is now limited to just the small access hole under the tractor. It would be helpful, since you have a great series of videos in your collection and your knowledge of the 1025r/1023 is extensive, if you would use a newer model 1025R. Maybe get John Deere to give you a real 'good buddy' price, since you've been singing the praises of the 1 Series tractors for as long as you have.
I pulled my hair out with the same grease fitting you had problems with Tim. When I had my JD 1025R in to have power beyond hydraulics installed I had the service department increase the size of that opening - problem solved. The amount of time and frustration saved is unbelievble. Every dealer should simply increase the size of that opening as part of pre-delivery until John Deere makes a change.
+Mark Calvert agreed. I see no benefit to the uber small hole!
Very helpful for a brand new 1025r owner.
Thanks!
Tim, Lock N Lube makes a grease gun barrel cap to capture the leaks from the following rod on manual grade guns. Fits on all of my manual guns (Alemite, Lincoln and Lock N Lube). Works great, and doubles as a priming bulb. Comes in multiple colors if you want to coordinate with the grease that's loaded. FWIW, a good grease gun (Alemite, Lincoln or Lock N Lube) helps but they'll leak if stored long enough with a cartridge in them. I like my Lincoln and Alemite guns, but I find myself reaching for the Lock N Lube more these days if only for the convenience of the Zerk fitting on the gun that I can latch the coupler onto during storage. No idea if the Lock N Lube gun will last as long as the Alemite and Lincoln guns I have.
All manual guns leak, even with the highest grade greases. It's just a matter of time. If you go through a lot of grease, you're much less likely to observe it. But for those of us that don't use more than a single 14 oz. cartridge in a year, and store our gun in an area that can get hot (or gets sunlight), the gun is going to leak. The ones I've seen leak a ton on someone's floor have been due to the user not releasing the following rod, and/or leaving a gun for a long time with #1 grease in it. My own worst case was getting out the gun for spring maintenance and having it dump all over my mowing deck belt. That's when I bought the Lock N Lube barrel caps.
Get the lube shuttle solution. No more leaks. No more pain with the old fashioned plunger.
hey Tim I'm fairly new to the channel to but a 40yr mechanic... cleaning of zerk fitting with finger or rag is a very good idea.. also the slop you had in the driveline looked to be a yoke to pinion but loose... that can become an issue down the road... something to take another look at... once the preload on the output brg gets to much play the cost goes up... there's a toqure spec on the nut that holds the yoke...
+John Hammack a quick survey on GTT showed that all 1-series tractors get this slop in the driveline. Not saying it is good, but apparently it doesn't typically go bad.
Thanks for your comment! Glad to have you watching our channel!
Hi Tim, I have a needle fitting for my grease gun that is about 6 inches long and connects to your lock and lube or just the end of the hose. With it you can stick the end of the needle right into the ball of the zerk and then pump grease into the fitting. I had to have it to grease all my universal joints on my 82 CJ7. Since you were under the tractor and had the zerk visible. Also if the grease separates and leeks out of the gun, it will do the same thing inside the fittings. Just a thought. I love your videos.
+Ken Litherland thanks for the advice and comment!
Make sure you get that front driveshaft joint! Didn't get mine as often as I should have over the past 8 yrs on my 2012 1023E. U-Joint broke and began rubbing against the power steering lines. Not fun to loose your steering on a hillside with a compound angle while you're mowing. Big expensive mess. Wish I would have known about removing that lower panel. Good news I now know how to remove the dash and all the other panels to get inside and clean out all the dirt and grass. Also, my rear MFWD is very sloppy after 8 yrs.
Hey Tim, just wanted to say Thanks. I finally found this video again. I've been looking for that piece, the LocknLube and just ordered it. I hate greasing too. I really treated myself and got a pneumatic grease gun. It blew up the lousy connectors on the old gun. Maybe the compressor is turned up too high. I'm going to do maintenance soon. Now I've got this one saved.
Wish you had seen our videos on the lube shuttle. You would love the cartridge system on it.
@@TractorTimewithTim ruclips.net/user/shortsWe3hGZ5IdIs?feature=share
ruclips.net/video/RUu6AyiCW9U/видео.html
Have you seen any Rust developing in your Gas Tank? Just inside the stainless steel area where the cap screw in, just below the level of the cap, rust has developed and that's what blocked up my fuel filter. It's been reported to Ag-Pro and John Deere. I'm waiting to hear from them right now.
@@davidmullen8357 Yes, I do see rust in that area.
Battery grease gun is great for us olden guys with arther-I-Tus. That new tip has just gone on to get list. Thanks
Good job! I have 2 grease guns. One with the lock-N-lube and one with a needle nose. I use the needle nose for that hard to get at fitting. Pistol grip is the way to go and even though I'd like a battery gun I can't justify the cost. My guns leak too. Have found that it's easier to pull the bottom handle back to lock it in place if you do it before unscrewing the top handle part. Doing that is when I'd like a battery grease gun. I think it would be easier. Last time I changed the grease on mine I was ready to throw it away. Hope you're not snowed in. :-)
+mi2tn we haven't got any snow here. Just a bit of ice this am, but it melted.
Thanks for another helpful video. You have taught and helped my learning process with my 1025. The backhoe attachment is getting put on this week !
You’re gonna dig it!! :-)
Tim I use an old sock on my grease canister, keeps hands clean....
Tim, I have a Lincoln grease gun with lever pump and don't remember having that much trouble like you are with that old one. Sometimes cheaper isn't better.
Love my Lock n Lube. I too did not like the long handle and went with the pistol grip, however ai went to a Lucas Oil Pneumatic. I had the same reservations on the battery operated, main concern was a few years down the road the battery would cost $90 to replace, figure the air supply was a lot easier. I also found it has enough power in the pneumatic to blast through a rusted up fitting like on some of my used implements.
Next video going to be greasing the H120? I like to grease everything at the same time, keeps me sane.
Tim the heavy equipment and ag grease has better moisture protection and better protection around rubber boots on tie rod ends and ball joints than the multi purpose grease that can degrade the rubber
Really like all your video's on your JD 1025R. One I would like you to consider is making adjustments to parking brake on 1025R.
FYI.... When you grease the hard to get to zerk.. I suggest to put a paint make on the flywheel.. Lining up with the zerk fitting.. It makes it easier to find it next time you grease it.. Nice clip
Hello Tim. I was a little concerned that the play in that one spline connection was enough to be visible. Rotate that shaft or use your video to inspect it for cracks. The shaft and splines coming off that pump are so small that 2x the amount of play as yours demonstrates would be failure. I had to replace this shaft assembly with only 300 hours on my 2320. Mine was due to universal failure that resulted in yoke damage. The new assembly universals also refused to take grease. So I disassembled the new universals, filled the cups with grease and put it all back together. The seals or end tolerances on the new universals are so close that only 1 of the 4 cups was allowing new grease to enter. I would have shown this to John Deere but they weren't interested. A failure of a universal at 300 hours, relative to a car, 300x45mph=13,500 miles. I've heard of these failing with half the hours I had.
Mixing of different grease types can cause grease breakdown. It's always good to check grease types and to not mix them.
Thanks for the video Tim, I am having a lot of trouble greasing that main front drive shaft, have taken the fenders off and the bottom panel also the floor or mats what ever it's called. I bought a industrial battery powered grease gun when I got my john deere , but I agree with you now I did not need to do that, should have invested in a locking grease gun in.
yea, you need a lock-n-lube. get one through our amazon store: amazon.com/shop/tractortimewithtim
Thanks Tim, you answered my question about the type of grease lubricant for tractor. Multi-purpose makes sense to me. Thanks
Great! I would recommend that you buy high quality grease. I believe the 'cheap stuff' is what separated for me. Still 'multi-purpose', but go with a little higher quality.
Roger that, Tim. Enjoy your coming weekend.
Just a heads up, I heard from an old timer that if you mix grease types it can leak like that because of different compositions from different companies. It does this in your stuff you're greasing too. I would stick to one type and grade and that's it. Nice job with the video. Like others said clean your fitting first.
Wipe it first & wipe it after, dirt collector
Hi Tim, I like your videos but do have a couple of comments about this one. You should wipe off the dirt from the grease zerk prior to putting your coupling on it so you don't pump dirt into the zerk. Also, do you think if you had a better grade of grease you wouldn't have such an issue with it running out of the grease gun. Just wondering.
+Andy Grimm not too worried about the dirt. Especially when you think of how much grease gets pushed through on each pump.
You likely have a good point on the grease. I'm wondering if this grease 'separates' easier than some other grease???
+Andy Grimm oh, and thanks for your comment!!
We use the same brand grease on a commercial scale only the tube is black and red not black and green(grease itself is red), never had a problem with it leaking out of our Milwaukee grease gun!
It's the gun. I had that same cheap gun. Started leaking from brand new. Threw it away after one tube of grease. Got a 20v dewalt cordless grease gun to replace it and never looked back. Very pleased with the purchase. Not the cheapest gun around, but worth it.
Andy Grimm ,....,,,.,Hank God
Have you seen the grease gun the guy on Good Tractor Works recommends? It uses grease that is in a canister, the grease is self contained. Looks like a great idea, not sure of the cost.
Always enjoy your video's, keep them coming!
+Eric Leighton thanks for watching!
Tim did make a video of the PTO block to back johnny up.
+mark hey Mark, try again with that question. I don't quite get it.
video on how to disable the PTO /RIO safety switch.
+mark ok. Yea, I'll get to it sometime.
mark use a clothspin under the PTO switch to bypass it
Tractor Time with Tim can you post it please
Great video. Got some price quotes on a1025r today. Going tomorrow to another dealership to look at 1025r. I'm about ready to take the plunge.
Uhoh! You’ll love it!
On our farm we use John Deere Multi-Purpose SD Polyurea Grease TY6341 does not separate like other brands can over time. Also rubber seals will react too different types of grease. Seals can get soft or hard causing them to leak.
GFP gave me a couple of tubes of that to try. I'll eventually get around to reviewing it.
I re-watched this recently to remember how you removed the cover down below the instrument panel/steering wheel. It seems that's no longer a separate piece on my 2016. I have one small access panel on the right side, but that's it.
Tim I don’t know how you you got that lock and lube on the hidden fitting. I have small hands and still really couldn’t get in there. I am glad I ran into this. I totally forgot about this one and haven’t greased it in probably 400 hours. I grease all the time. Too much if anything as I just forgot about this one dor some reason. Lock and lube works great everywhere else but not here at all from the bottom. Have to start over tomorrow and may go get a needle fitting. This is just Asinine by JD!!!! Mines a 2013 btw
Yea, I had to use a needle
I thought it shows you got the lock and lube connected when you disassembled it?
From the top side, yes.
@@TractorTimewithTim I have it apart and still couldn’t get it hooked. May try again but it is so tight
I liked that video, and I totally agree about drippy guns. I have one and it leaks so I tie rap a rag to the bottom. Gotta grease but I too won't buy a battery grease gun, and I don't really guess why they sell so many different grease options but I do like the red stuff.
+Jake Schisler I'll have an update on this at some point.
Tim, super informative. Thanks! However, call me anal retentive if you like, but I was always taught to wipe the surface of each fitting prior to the attachment of the gun and installation of grease. My grandfather was particular about our farm equipment and seldom had anything break. Great videos. When my wife questions me about our 1025r, I always find the explanation to her question in one of your videos which saves time and discussion. Great job.
Wipe going in & wipe coming out & don't blow the oil seals - Smack.......
Great video. I enjoyed it. It is important to grease things for sure. Do you think you're going to do a greasing video on the loader and the mower deck? I could have missed it if you've already made one.
+Love2boat92 I've showed greasing the mower in he mower blade replacement. Haven't shown the loader or backhoe. I'll get to them sometime.
Thanks Tim! Love this video. I just found your channel here and have been watching your videos. I have this 1025 and have for a couple years few years now. Love it. Was always wondering if I greased correctly and this video showed I missed a few areas. I don't have any pto attachments yet. I have a front end loader and backhoe. I grease those regularly. Questions: should I grease the pto points even though I don't use that yet? Should I remove squirted out grease when it builds up? Particularly on my front loader and backhoe?
I think the issue with dripping is the grease itself breaking down/separating while in storage. That us the primary reason I went to the one handed mini grease gun. Much smaller grease tube, that I'll use up (hopefully) before the grease begins to breakdown.
+Clayton Yendrey I'm using more grease now with more attachments and more hours on each attachment.
Nice video.
I would add that the zerk fitting tip should be wiped off before adding new grease. If your pushing dirt that’s on the zerk into the joint that’s just helping to wear out the joint sooner.
Great Video . But one question . Why is your suicide knob tilted to the inside of the steering wheel ?
+Danny Wakeman that is just how it fits. Doesn't seem to bother me.
I found that it didn't matter what type of grease gun I had they all leaked. I also found that pulling the T-handle out before taking the oyjrt end off there is little or no grease coming out. then take the top end off. I found that releasing the T-handle and pushing it in will eject the m-ty tube then just pull the T-handle back out and load the new tube. Also the warmer the air temp is the more they will leak also. I'm always wiping my gun off because of leaking grease, It's just something you have to get used to.
Not sure what year your 1025R is, Mine is a 2016 and I can't remove the interior cover to get at that grease joint as you show. My boot has the 4 bolts you show as well as 4 bolt that secure the boot to the floor. It actually looks like this is a one piece console, which I didn't care to try to remove.
+Joe Smith mine is 2014. Interesting that they would change this.
Thank you for this! I used your video because I forgot where the dealer told me all the zerks were 6 months ago on my 2018 model. I know there was a few changes in the new model, such as the rubber boot has a hose clamp with a huge plastic wingnut on it, and obviously the side panels are tool-less; but the most significant I've noticed is that you can no longer remove that bottom cover on the dash to access the u-joint. It is all one complete piece now.
Well, there's also all the steering components being sealed now as well. That's a huge downgrade in my eyes.
Yes, I heard about that change. Have a video coming out at 3pm EDT today showing another solution to that fitting.
Awesome, I'll look forward to seeing it. I guess I ended up deciding to grease my tractor at just the right time.
Look up brapp media lubrication video really simple way to get that front fitting. Appreciate the content. 👍
I know this is an old video but II have a recomendation: wipe off the zert fitting before attaching the lock and lube.
This keeps the lock and lube from forcing dirt into the joint. In extreme cases the dirt can "freeze up" the zert and it will need to be replaced. Some people will say that this is @#. However, I learned this from a pro mechanic.
Thanks for the video, will save me a ton of headaches.
+catfish500mark thanks for watching
Video was helpful Tim, thanks. Just bought a 1023e used and greased/greazed everything. Fitting pulled out on power steering, ever had that happen? It goes back in but can wriggle it out pretty easily
Great job with video and appreciate all additional feedback. W
+S. Warren Richey thanks Warren!
Great video Tim
Did miss your lubrication of the control valve? It is specified every 50 hours.
Have you thought about using an epoxy type floor coating for your shed? This would help with the oil clean up plus it looks great.
Will it handle scratching, scuffing of sliding stuff around?
The home versions are resistant to scratching but not scratch proof. There are some commercial products I have seen. Just research it. One I have seen is armorpoxy.com/armorultra/?gclid=Cj0KCQiAtJbTBRDkARIsAIA0a5Ng3b5pFrax3ng2j-7wzR-l968ojdUDGCyfKF1vCNOlT31BCDDc_TQaAvB5EALw_wcB
Thanks Tim!!
Tractor bootcamp here, just wondering if there is an easier way to line up the zerks facing down on the u-joints without moving the tractor? Thanks Great vids by the way!
+BT B I can't see how there would be. ...unless you get the wheels off the ground.
Thanks Tim, I had to ask to make sure I was not doing it the hard way.
Even with the wheels off the ground you won't rotate the main drive shaft unless the engine is running. Drive shaft is connected to the engine. The front wheel drive shaft will turn with the wheels.
Tim, get yourself a Lincoln 1134 pistol grip gun. About $39 on Amazon.
And thanks for reminding about the LockNLube . Just added to my cart.
+blue87fj60 I should have directed you to my website. I have it linked in my latest post. ...and if you add to cart from there, I get a few cents! Thanks for watching!
I'm not sure what the temperature was when you shot this video but something does not seem right with that grease. I store my tractor and grease in an unheated/uncooled shed which can get 100+ degrees in the summer and I've never had any of my grease guns squirt out juice like that. I use JD SD Polyurea in both gun (pistol grip and lever type). Perhaps other can comment if it is a characteristic of certain types of grease.
EOSJOE I have a similar set up as you and in the 8 years of using the JD grease I haven't had any of the leaking issues. Years before I had the issue with oil separation with other brands. Used to have to wrap the gun in a rag and bag it. Then while using it I did the old sock thing mentioned above. As far as deciding to use another grease than JD brand it is OK as long as it matches specifications. When I got my tractor, for convenience, I had everything required for two years worth of preventative maintenance put in the deal. So that is how I got to experience the difference of JD grease.
I do agree any grease is better than no grease, But when it comes to bearings And mower spindles I always use A lithium base high temp grease. It not only works well for high temperatures , But it also helps shed water And corosion.
+steiger 256 sounds good. I just want to find grease that won't separate in the tube and spill all over the floor from my grease gun!
When greasing the spindles on the mower deck, how do you know when you have enough. Since spindles are basically just a hollow tube with a smaller shaft and two bearing, are you to pump grease in to fill the hollow tube? If so, how do you know when you have enough? Will it start squirting out?
Thank you Tim. Question: You say it was your "lucky day" because the grease nipples on the 4w drive shaft were facing the right way for greasing. How can I turn them if they are not facing the right way?
You might be able to turn the shaft if in .2wd mode, not sure.
You might be able to turn the shaft if in .2wd mode, not sure.
Thanks Tim. I'll give it a try. Great videos!
I can't find all of the Zerks on my 2017 1025 R. Doesn't seem to match any videos I can find. I can't find a diagram online either. Ps. You need an Iowa sticker to go over that Illini one ;)
Tim, great video! I agree with the pistol grip grease gun! It makes everything a lot easier. I also have the lock and lube. Don't really care for it. It's too big to use when I'm trying to grease the front end of my 4x4 truck. Can't reach the zerts! Sometimes I think a metal tube instead of the flex hose is the better way to go. Great job!
+Fred Kaminski steel tube works great if you have good access to the zerk.
Great Info again Tim Thank you
What do you use in the gear box on the deck
Tim, what is the depth of the pallet rack? Thanks.
+Steven L mine are 46. I bought used, and they had a special deal on these 3 rusty uprights. I would choose 42 or maybe 36 if I were to select again. These racks are made so that the same beams can be used on different width uprights.
Nice job Tim . . . I'm headed out to the shop soon to grease the U-joints and this was a great refresher.
I need to grease mine too, Marlin Thanks for your comment.
Helpful video. thanks Tim!
Thanks Joel! Hopefully the new 2032r will be well cared for now!
does your tractor not have a grease zerk on the front axle pivot ?
+kw900lkevin I'll double check. I don't believe the book points one out.
Hello Tim
Any problem taking loader off after you remove bucket/forks, that would really save me some space if you didn't have issues.
Thank you Bill
I do it, but there is a balance issue sometimes. Hard to describe, but it will work.
I can understand with dollies you use I might try Harbor Freight dollies, I was just worried about weight on the bar and bending it. Thank you for the response and your videos.
Thank you for this!
Don't have access to the tractor now. Will post a picture when I get back to my other home on this cover.
Does Lucas red and tacky grease work for tractors like this?
Thanks, I need to review it once a year before doing the work.
Thanks again... I've enjoyed another video
Thanks Michael!
Thank you so much Tim!
Well know I know the maintenance to look forward to on my new tractor!
Tim what was that you put under loader to move it easy
Use furniture dollies
Use furniture dollies
Great vid Tim Smile More God Bless Stay Safe Guys
Enjoy keeping up with you as you work through all of our videos. Thanks for continuing to watch.
you can get a self content air grease gun hook air to it and a way you go look for them at your auto supply dealer.
I see you put your tractor on blocks for this, my question is want size blocks are you using? I’m also thinking your driving up on the blocks? As a new tractor owner, I know my questions sound may sound odd, but I a safety nut.
I used 6x6’s. I took a chainsaw and cut an angle on a 6x6 so that I could drive up.
...at least for the rear tires. You can use the loader to raise the front tires.
Thank you so very much. Keep the videos coming.
My brand new 2021 JD 1025R TLB manual does not show where to lube and maintain the JD. What is up with that? That being said thanks for the video. I guess JD wants your stuff to quit working so they can replace it? Any options on a chart to show all the lube points?
Was that hose around the shaft on the machine or was that your idea?
That is factory.
Is there a secret to turning the fly wheel in order to gain access to the zerk at the front end of the drive shaft/ The gear shift is in N and it's in two wheel drive - The wheal appears to be locked - any ideas?
Try turning it the other direction.
Tim, hard to tell from video but how hard would it be to replace angle zert fitting with a straight one?
+Jeremiah Hartman I don't really know, Jeremiah. Not sure if that would fix the problem or not.
Hey Tim, around the 6:25 mark, did anything ever become of this loose shaft concern? I have a similar amount of play in mine.
Turns out to be normal. No one that I know of has had any damaging results.