Just like when I had an optical mouse from G.E pop a couple of AAA batteries and leaked battery acid right onto the optical sensor. The battery compartment was open, exposing the circuitry underneath. It was also forming a sort of funnel, I kid you not! The acid flowed directly onto the optical sensor, causing a sizzling noise, almost as if it was designed like that on purpose!
Reciprocating saw parkside performance broke for me - it just 'clicks' once when I pull trigger, like overcurrent, moves engine by 1 tick and then stops, is it a common problem? Nothing burned or weird inside
My B2 died after unscrewing 12 car tire bolts but using a performance 8Ah battery. On 4Ah it worked roughly 4 months ( never unscrewing something like tire bolts, only small screws and bolts ) untill that day when i was changing tires. Between those 4 months i've got new 8Ah so i was happy to try it in my Angle grinder, worked really really well. I swapped it in to this Impact driver and after 12 bolts it smoked, burnt and bye.. not working anymore. I took it appart and the whole control PCB was black. I grab my multimeter to test what is going on and the driving mosfet and some capacitors blew up, pushing 20V and full current in to the motor burning it as well.
@@samohraje2433 ive been using b3 with 2in1 anvil for about 4 months now for automotive stuff at work with 4ah and 8ah smart battery, 90% 4ah, usually used for small stuff and wheel bolts/nuts sometimes suspension, with charged enough battery will do axle nuts but wont do axle bolts like on audi a6, triggers shit but overall very happy sucks 12v one sucks ass
Im using the same for car repair as Hobby. Since 6 months but im not a heavy User maybe 1-2 Times per week. It's very strong and I like it @@meddis4647
@@silverify its kinda funny you know, because last week or so after using it around brakes it started acting funny, doesnt happen often but still does, after using it on bit harder stuff like wheel bolts after releasing trigger tool would still run maybe at around 1000rpm more or less idk but only way of stopping it would be removing battery and would do this for few times in a row sometimes would spin for few seconds and stop but after few times it would go back to normal, maybe something is with trigger idk, so to make it bit more clear after relesing trigger it would still spin slowly without touching trigger, switching directions wouldnt do anything only removing battery would make it stop unless it did stop by itself
In the Netherlands we have a saying 'goedkoop is duur koop' which literally translates into 'cheapbuy is expensive buy' You only buy an expensive tool once, but you end up buying cheap tools multiple times and eventually end up paying more in the long run. It's just not worth it. Same for things like electrical house appliances. Always buy a good quality one, it will save you a lot of money and time in the long run!
@@askalade Except the parkside black stuff is actually pretty good. I got tonnes of the stuff already. I cant see why it would be worse than the makita stuff i have from work. It does the job. I'd say the big drill with an extra handle is actually too powerfull to be used for anything other than drilling.
@@frederikmare9002 don't you realize you can swap out the hexagonal fitting for a half inch socket end? If you want to use a socket on an unmodified device you need an adapter which really defeats the purpose of having a stubby.
I will comment later, I'm in the hospital right now... My nephew swallowed 512Gb memory card and he is singing all songs in it. We are praying and hoping it doesn't reach the video folder!
Had the same thing happen with the parkside 18v cordless grinder,worked perfectly fine for all of 10-15 minutes😄 Think Milwaukee or dewalt is a safer bet.
Parkside is a brand that's under Lidl (European supermarket chain) - ofc, they're not a top brand by all means ... But they have some affordable shite for various stuff. Would be good for some occasional work - not for any serious construction or large volumes of work. Decently worth it if you're just starting and you need a few cheap tools
bro i have a parkside bitset that is 5yo now.. it survived my very heavy Makita , and ONLY 1 bit broke... for 10 euros .... my wera(ok on impact) broke quicker
@@DreStyle It is just their power tools, I have a bunch of park-side screw drivers and bits too they hold up nicely. But I used to have a Parkside dremmel style multitool that disintegrated and a heavy duty hammerdrill that would not let go of its chisel.
Bro do you have guide for fixing sawzall parkside performance? The reciprocating saw, it stopped working for me without anyrhing burning, just 'clicks'and moves the blade holder by 1mm, disasembled it but no obvious reason why, is this common issue?
Seems like he's gonna repair it
Him:
Hahaha😂
He did reair id moron just vid is too long
I mean why repair garbage lol
Has a great warranty. Just call them up. Perfect for most DIY jobs
Support
I like how they put in a port for the magic smoke to escape through. Kind of them
Eh, if it didn't have a vent hole it might have kept in the magic smoke. Everyone knows it doesn't work without the magic smoke.
how brasil is transporting drugs
It's not a vent hole, it's for the belt clip accessory
That's a cooling channel actually
Just like when I had an optical mouse from G.E pop a couple of AAA batteries and leaked battery acid right onto the optical sensor. The battery compartment was open, exposing the circuitry underneath. It was also forming a sort of funnel, I kid you not! The acid flowed directly onto the optical sensor, causing a sizzling noise, almost as if it was designed like that on purpose!
this is the B2 model, when it smokes it's the capacitor that burns, I'll make a video of it
Reciprocating saw parkside performance broke for me - it just 'clicks' once when I pull trigger, like overcurrent, moves engine by 1 tick and then stops, is it a common problem? Nothing burned or weird inside
My B2 died after unscrewing 12 car tire bolts but using a performance 8Ah battery. On 4Ah it worked roughly 4 months ( never unscrewing something like tire bolts, only small screws and bolts ) untill that day when i was changing tires. Between those 4 months i've got new 8Ah so i was happy to try it in my Angle grinder, worked really really well. I swapped it in to this Impact driver and after 12 bolts it smoked, burnt and bye.. not working anymore. I took it appart and the whole control PCB was black. I grab my multimeter to test what is going on and the driving mosfet and some capacitors blew up, pushing 20V and full current in to the motor burning it as well.
@@samohraje2433 ive been using b3 with 2in1 anvil for about 4 months now for automotive stuff at work with 4ah and 8ah smart battery, 90% 4ah, usually used for small stuff and wheel bolts/nuts sometimes suspension, with charged enough battery will do axle nuts but wont do axle bolts like on audi a6, triggers shit but overall very happy sucks 12v one sucks ass
Im using the same for car repair as Hobby. Since 6 months but im not a heavy User maybe 1-2 Times per week. It's very strong and I like it @@meddis4647
@@silverify its kinda funny you know, because last week or so after using it around brakes it started acting funny, doesnt happen often but still does, after using it on bit harder stuff like wheel bolts after releasing trigger tool would still run maybe at around 1000rpm more or less idk but only way of stopping it would be removing battery and would do this for few times in a row sometimes would spin for few seconds and stop but after few times it would go back to normal, maybe something is with trigger idk, so to make it bit more clear after relesing trigger it would still spin slowly without touching trigger, switching directions wouldnt do anything only removing battery would make it stop unless it did stop by itself
Every self-respecting man knows that power tools run on white smoke, and when that white smoke comes out of the tool, it stops working.
What about black smoke? Would it be cursed at that point?
Same for cars right. When it stops smoking you need more oil.
Not all have the money to buy expensive stuff..but with this label i make my life and i'm glad😊
same...me to
buying brand like makita,dewalt,milwaukee its so expensive for me.
glad i used brand ingco/total ..so valuable for me
In the Netherlands we have a saying 'goedkoop is duur koop' which literally translates into 'cheapbuy is expensive buy'
You only buy an expensive tool once, but you end up buying cheap tools multiple times and eventually end up paying more in the long run. It's just not worth it. Same for things like electrical house appliances. Always buy a good quality one, it will save you a lot of money and time in the long run!
@@wiro212there is Skil which is accessibly priced and has better quality than parkxide. Also harbor freight is pretty decent these days.
@@askaladewer billig kauft, kauft zweimal
@@askalade Except the parkside black stuff is actually pretty good. I got tonnes of the stuff already. I cant see why it would be worse than the makita stuff i have from work. It does the job. I'd say the big drill with an extra handle is actually too powerfull to be used for anything other than drilling.
when the smoke came out, I involuntarily blew on the screen 😂
The impact wrench is only available with a hexagonal holder, which means he has already tinkered with it
It is much more handy with this aliexpress 1/2 inch socket adaptation. I did the same thing to mine.
The impact driver has a hexagonal fitting, the impact wrench has a half inch square drive like this
@@frederikmare9002 don't you realize you can swap out the hexagonal fitting for a half inch socket end?
If you want to use a socket on an unmodified device you need an adapter which really defeats the purpose of having a stubby.
Это душа гайковёрта отлетела 😢
è solo uscito il Genio da Parkside!
😂😂😂... esprimi un desiderio!
I will comment later, I'm in the hospital right now... My nephew swallowed 512Gb memory card and he is singing all songs in it. We are praying and hoping it doesn't reach the video folder!
That's a weird joke dude
A smoke maschin cool
Had the same thing happen with the parkside 18v cordless grinder,worked perfectly fine for all of 10-15 minutes😄
Think Milwaukee or dewalt is a safer bet.
Вся электроника работает на белом дыму, дым вышел - прибор сдох :(
Nice video, thanks :)
Man the sound of that first wire cutt gaves me flash backs 🫠🫠🫠😂😂😂😂
Parkside = spark inside
Genious 😂
😂😂😂😂😂
Brushed motors do generate sparks inside the drill 🤔yjfkmjku😢😮😅📿🛐🏂🛐🏂🛐🇺🇸💀😮💨😤🏂
I'm relatively new to the various power tool brands out there. Is Parkside a very low budget brand, like HART?
Parkside is a brand that's under Lidl (European supermarket chain) - ofc, they're not a top brand by all means ... But they have some affordable shite for various stuff.
Would be good for some occasional work - not for any serious construction or large volumes of work.
Decently worth it if you're just starting and you need a few cheap tools
@@asura.s.fury23
I appreciate the response. Thank you.
When an electric tool dies and goes to heaven you briefly see it’s soul leaving the body 😂
honestly to repair this pcb requires about 3-4 hours of digging, also there are spare places for the new fets
Now the tools have started vaping
Extra crispy power regulator. Make sure that the rotor coil is not shorted.
That really was some magic smoke!
Considering that parkside tools look like toy ray guns, I'm not surprised it blew up.
My principal in electronics high school used to say that all electronics run on smoke and once you get the smoke out they stop running
i thought u will gonna repair that modul !!?? 😂
the ending make me laugh
brushless ❌
BRUSHED✅
Brushless motors have 3 wires while brushed have 2.
In the video theres 3 wires.
And it says brushless on the tool.
Dumb boi.
Pas cher coutent cher !! Mon patron y’a 20 ans disait ça 😂 plus qu’à racheter 😅
In last he threw it was epic😅😂🤣
Вейп - гайковёрт 👍
parkside more like, ahh park to the side?
edit: if cringe could kill I would die
Bro I cringed and had a stroke trying to read the edit.
I'm a tool repair tech and we even see failures in the controllers of the higher end tools except not as severe
Так вот как школьники электронные сигареты прячут
Seems like a quality product
Usually i have nothing to complain about Parkside and Parktools.
But when i comes to powertools i use Black and Decker, no problems so far
Sometimes i cant even get the battery off
Is it me, or is Parkside a sub-brand of Darkside tobacco? I'm not surprised then by the thick smoke that comes out of it.
Casi lo compro 😅😂gracias por avisar
Just take the board and replace the tanned one with a new one!
I thought it was going to be a funeral 🫠
Man? Watch out for your health! Steams of burning lithium could esplode and be dangerous for lungs!😮
In the army we used the parkside drills instead of smoke bombs when supplies were interrupted
Sick vape bro where do i get one
Das ist die neue Parkside Vape ❤🎉
Can't take the Pressure, Bennet, huh? - Arnold Schwarzenegger, Commando
Let out some steam Bennet 😂
“yo nice nic, what flavor dude”
Typically Parkside quality I have owned a bunch of Parkside tools, not a single one of them has not been broken or suffered some other defect.
bro i have a parkside bitset that is 5yo now.. it survived my very heavy Makita , and ONLY 1 bit broke... for 10 euros .... my wera(ok on impact) broke quicker
@@DreStyle It is just their power tools, I have a bunch of park-side screw drivers and bits too they hold up nicely. But I used to have a Parkside dremmel style multitool that disintegrated and a heavy duty hammerdrill that would not let go of its chisel.
Didn't you make a battery and put it in with the + and - reversed?
Würde mir nie einfallen so ein scheiss einzukaufen 😂
The smoke is an early warning feature of imminent explosion. Not many impact guns have this
All electronics work on white smoke. When smoke is out than not work 😂
Ive been wondering what "Magic Smoke" was and where it came from.
Is Parkside a subsidiary of BYD?
Nekem minden Parkside gépem kitűnően működik. Talán azért, mert arra használom amire való és nem terhelem túl. Ipari célra 10x drágábbat kell venni.
no amigo esso lo acen para destronar la competencia.. q sucios son..😅😮😢🎉😂❤
you need to put the smoke back inside then it’ll work again
electro boom troumatised in the corner 😂😂
If it’s smoking it must be the head gasket
✍🏻
I can smell the magic smoke from here
Bros drill is Vaping💀
so great
Nice Angle Grinder 👍
Гайковерт то нечего а вот электроника Китай.
В одном предложении -- 4 ошибки!
I can imagine the smell in there 🤢
I was about to say
had the same issue, got a new one exchanged in waranty
This thing works on magic smoke. Once it goes out, the tool dies!
"Let's smoked"!
Автор, объясни, пожалуйста, в чем конкретно проблема была? Что дымилось-то на плате?
So cool🎉
Huh, that can be dangerous🙄🛠️
Mosfet are common fault. When they burn like that.. they fuse and burn PCB layers at the same time. It is not ideal to fix.
I used to fix those brushless controllers, but it's just not worth the effort.
🎉❤❤❤❤
Плата защиты акамулятора, по высоком току не сработала?
It's not a grinder it's a impact wrench
Perfect for those who don't want to get things done
The smoke wa like vape💀
Will it vape?
Дымок, Дымок опутол потолок
Ahha sondaki atış 😂😂
I had the same thing!
😂я, навіть, подув на екран, щоб дим розвіяти.
Smoke show 💨
I even blew my phone 😂😂😂
Я начал кашлять при просмотре этого видео.
Bro do you have guide for fixing sawzall parkside performance? The reciprocating saw, it stopped working for me without anyrhing burning, just 'clicks'and moves the blade holder by 1mm, disasembled it but no obvious reason why, is this common issue?
Też tak miałem z kosa, oddali kasę.
Smoking is injurious to drill machine 😂😂😂
Puff, The Magic Dragon...
Vapes are getting wild now how do you even smoke that
The tool was vaping
Man thats a freaking vape box💀
Произошла разгерметизация - вышел белый дым, на котором работает теника
You went above its torque rating.
It did have a 5 year warranty 🤣
i can smell it from here
that the forbidden kids vape
Now it's a Smoking Gun. 😂😂
Schick das wieder Firma zurück.
Parkside.... Hight quality😂😂😂😂
Конденсатор не выбрасывай. Он пригодится
* instantly snorts all the smoke
Well mine works fine for over than 1 year :D
Love Parkside tools.
Motor brushless se puede adaptar otro ESC alguien ya cambió algún genérico?