I looked at these two units at a woodworking store this morning. I'm glad I didn't pull the trigger before doing more research. Thanks for the heads up.
Hello It was a useful video, thank you. I use Proxxon for porcelain finishing work. Would you recommend Merlin 2? Proxxon heats up in 15 minutes and I need to take a break. I wanted to ask since you use both. thanks
Hi there. I use a torch to burn the gunk out of my proxxon wheels. I just use a small handheld butane torch. I don't let it get too hot, I keep burning it and then finally I use a brass brush and it comes loose. I heard somewhere to use the brass brush because the steel will damage the wheel. Not sure. Thank you for the videos!
Hello, may I ask you a question about dimension, actually the clearance for shoulder of the cap that holds a disc (cutting disc surface) from that sholder to the surface of the disc (that is 1mm)? I need such tool to cut metal but space where I need to cut is quite narrow.. Thank you.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Thank you. No one was admitting the merlin 2 bits fit the proxxon. 8ve toasted 2 merlin so this is good to know
I looked at these two units at a woodworking store this morning. I'm glad I didn't pull the trigger before doing more research. Thanks for the heads up.
Are you still using the proxxon successfully? Have you considered the Worx MakerX grinder?
I am still using it successfully, but I will look into the other one that you had mentioned. Thanks for the tip.
Hello
It was a useful video, thank you. I use Proxxon for porcelain finishing work. Would you recommend Merlin 2? Proxxon heats up in 15 minutes and I need to take a break. I wanted to ask since you use both.
thanks
I don't recommend the Merlin2. They have a new model so maybe it is better. I don't know
Should have a back-up grinder, or ready-to-use other one with different disc. I have 5 grinders fitted with 5 different discs.
@@sukrusenemoglu hmmm Merlin 2 was always breaking down. I've had no trouble with the Proxxon
Hi there. I use a torch to burn the gunk out of my proxxon wheels. I just use a small handheld butane torch. I don't let it get too hot, I keep burning it and then finally I use a brass brush and it comes loose. I heard somewhere to use the brass brush because the steel will damage the wheel. Not sure. Thank you for the videos!
Good advice thanks for commenting
Hello, may I ask you a question about dimension, actually the clearance for shoulder of the cap that holds a disc (cutting disc surface) from that sholder to the surface of the disc (that is 1mm)?
I need such tool to cut metal but space where I need to cut is quite narrow..
Thank you.
Hmmmm, between 3/8" and half " I believe . A dremel tool may be a better option
@@I-build-craftsThank you for your answer!❤
How to buy this product can u give me address
www.amazon.com/Proxxon-38544-Longneck-Angle-Grinder/dp/B0017PR65Y/ref=sr_1_1?crid=3MJ47OIKUYMTC&dib=eyJ2IjoiMSJ9.u6JGuiSJVJ2BiRQo0iMEOaKrefSVFmroTjiRpXCsBwDY__cDCWzd9ghq4bDybkTniGJi5MIElt6Kd3tcyG2PUIdBWgzoKMasRwSBePIuTxK530wwWazp34V3bT__xenopNuz-wNZPokPxTaN-UuI9-W3MRDR14C0FgIhuRxczGaZUSmN60u7R6SSzXEccBpyyfdj_kRqnf9_Bpt0xjitHxmSJ_AaBaP6rWFjlqtA6KE.5XxJbHeJZYl6yw2NaiEQgOW87FZXym17tQWRul8YviE&dib_tag=se&keywords=proxxon+mini+angle+grinder&qid=1732545555&sprefix=Proton+mini+angle+grinder%2Caps%2C93&sr=8-1
No need for music during a review. Tks.