Shehana Lagoy resin distorts at 180 degrees. The heat produced by the spat 31 is not enought to cause distortion. The main concern is removing the record base when it is still hot immediately after curing or heating it with the hand piece when it has just finish curing.
Thank you Dr......Could you confirm the width measurement of the final occlusal upper and lower rims ( anterior, canine & molar areas) ? because you mentioned 8 mm all around... also when you place the tape to on the occlusal surface, do we need to place it in the middle ? and which side need to reduce more to reach the required width ?
Arctic Circle thanks for your feed back. This was one of my first videos I made I hope to devlope my teaching and editing skills for your viewing pleasure. Please subscribe and stay tuned.
Hello I like so much your job Technik. You do a really good job.can I have your address? I worked in Afghanistan as a Dentist 4 years but there is not safe at all. It becomes danger for me.I had to leave Afghanistan and it's six months that I am in a European countrie as a Refugee but I have no result till now. I like your job.
девушка великое терпение у вас заниматься херней .. да нельзя пускать женщину в мужскую профессию. ... сразу нитки пошли .. вы сами себя мучаете ...наверное любите садо-мазо.. пока вы сделаете один протез можно их три сделать..
@@dr.stephanielomelid.d.s you spend a lot of time aimlessly.. a lot of unnecessary steps to perform these works . while you make one prosthesis I will make at least two prostheses .
@@hak1qwerty832 I appreciate your comment these were made to show students multiple different ways to do rims. They may not be how you would do rims however I followed how the school does them then showed other additional options.
Nahid Anam thanks. I generally do the wax rims in a fraction of the time but this video was made for pre-clinical demonstration. I will be posting a consolidated version soon
Dr. Stephanie Lomeli, D.D.S Very nice! I am a student from Greece and a hospital worker mental disorders. I am 26 years old and work and work in parallel. you have a very nice video for dental technicians. I try to finish my studies so that I can become a craftsman in a hospital. You are very good at work 👍👍👍👍👍
Take your alcohol torch and flame it. The last place i worked at my boss hated for me to make mine look like a piece of art. Matter fact he would set up a case and ,and set 2 different front teeth ,and both having different shades and send it off to try and tarnish my reputation, and he would hide my tools that i was absolutely use to , so i couldnt make my cases top notch. I broke my heart that i was forced out over Jealousy. Anyway you do beautiful work.
Dentures are not made of wax! this is the bite registration block it is used to mark things like centre line, smile line and canine line as well as centric relation. The teeth are them set up in wax, the whole thing encased in plaster in a flask and the wax boiled out, acrylic is then placed where the wax was and set over night, then ta da!! Dentures are ready to trim. 😀
And the Dentist who only wrote the prescription sells the denture to the patient 5 times more. Example: Dentist pays $450.00 & Patient pays $2,600 I remember when my Dad went straight to where a friend of his sent him. Password Three slow knocks + a short whistled. Silence, 2 short knocks and yell out loud Margarita on the rocks (twice). The door opened, quickly in, door shut, great job, big savings 😃
this is in what country the price of a removable prosthesis 2600 dollars ? in Russia Dagestan costs a maximum of $ 150. and this is their full cost.and I'm ready to do them around the clock for $ 200.
Hi. The doctor spent years to study dental medicine and not just some random job anybody can have as quick as possible. Dentists usually don't charge by the procedure or material used but how they made the procedure correctly and safely for the patient and for the license also. You can't just fabricate a complete denture without knowing how to set the teeth properly, festooning, articulating, impression taking, correct VDO-VDR, centric jaw relation, health status of the patient, past medical history of the patient, past dental history, instructions on how to take care of the denture etc..
The amount of product wasted is amazing!
Two wax sheet to make one block.
What a waste..
Thanks for teaching
Thanks watching from Canada 🙏
good but if u take out the occlussion rim to the cast, the base plate will shrink becoz of heating with carver. this may cause problem.
Shehana Lagoy resin distorts at 180 degrees. The heat produced by the spat 31 is not enought to cause distortion. The main concern is removing the record base when it is still hot immediately after curing or heating it with the hand piece when it has just finish curing.
Hi Stephanie. Great video. Very easy to follow your instructions
Gracias :)
Ok
This is extremely helpful. Thank you doctor!
That floss trick is amazing . I have not seen it before . Great video showing some great tips
Why do I look like an old grandma with my new full denture. What's the problem. Your videos are excellent
so very nice job
Yo where 2 get materials ????????????
Wow I wish you could do my dentures!!
Sana all makapag pagawa ng ngepin😁😁😁
May I ask these materials, where some buy
Thank you Dr......Could you confirm the width measurement of the final occlusal upper and lower rims ( anterior, canine & molar areas) ? because you mentioned 8 mm all around... also when you place the tape to on the occlusal surface, do we need to place it in the middle ? and which side need to reduce more to reach the required width ?
O0😊lo
It's gigantic!!
Thats an insane amount of wax wasted to make occlusal rims...
Awesome Dr but too much arduous job.
Arctic Circle thanks for your feed back. This was one of my first videos I made I hope to devlope my teaching and editing skills for your viewing pleasure. Please subscribe and stay tuned.
Hello
I like so much your job Technik.
You do a really good job.can I have your address?
I worked in Afghanistan as a Dentist 4 years but there is not safe at all.
It becomes danger for me.I had to leave Afghanistan and it's six months that I am in a European countrie as a Refugee but I have no result till now.
I like your job.
I love your videos but I don't really like dentures ..
🦉🦉🦉
Hawar you Dr véri Good djob
numpang liat aja
اگر لطف بفرمائید فارسی صحبت کنید خوب میشود
ايه دا مش فاهم حاجه دا اوردي دا 😂
Việt Nam Xin Chào
This is extremely helpful. Thank you doctor!
this practical seem like a wasting of modelling wax to me.. From the height to the width. Can you be a little conserve with your materials. owk
девушка великое терпение у вас заниматься херней .. да нельзя пускать женщину в мужскую профессию. ... сразу нитки пошли .. вы сами себя мучаете ...наверное любите садо-мазо.. пока вы сделаете один протез можно их три сделать..
Hak1 qwerty I don't understand, but thank you!
+1000 это извращение, а сколько воска угробила, весь стол залила)))
@@dr.stephanielomelid.d.s you spend a lot of time aimlessly.. a lot of unnecessary steps to perform these works . while you make one prosthesis I will make at least two prostheses .
@@hak1qwerty832 I appreciate your comment these were made to show students multiple different ways to do rims. They may not be how you would do rims however I followed how the school does them then showed other additional options.
Онанизм
Which tape you used ???
I want to ask about a suitable job in the United States of America. Is it possible? I am from Morocco
شما بسیار خوب هستید وعالی توضیح می دهید خیلی ممنون پروانه هستم از ایران
Excellent technique , Thanks form EGYPT
It looks nice but I’m sorry to say that it’s too much time just for a wax bite
Nahid Anam thanks. I generally do the wax rims in a fraction of the time but this video was made for pre-clinical demonstration. I will be posting a consolidated version soon
More video,were are you?
rakoonloufa88 we will be shooting new videos next week. I will be posting more soon!
Dr. Stephanie Lomeli, D.D.S Very nice! I am a student from Greece and a hospital worker
mental disorders. I am 26 years old and work and work in parallel. you have a very nice video for dental technicians. I try to finish my studies so that I can become a craftsman in a hospital. You are very good at work
👍👍👍👍👍
Excellent technique , Thanks form Florida
So happy to have found your channel- This helped me a lot!
Kelsey Lee I’m so glad to hear that! Please keep following to watch more!
@@dr.stephanielomelid.d.s thank u for these amazing videos ,can you make videos about Removable partial denture🌸
Take your alcohol torch and flame it. The last place i worked at my boss hated for me to make mine look like a piece of art. Matter fact he would set up a case and ,and set 2 different front teeth ,and both having different shades and send it off to try and tarnish my reputation, and he would hide my tools that i was absolutely use to , so i couldnt make my cases top notch. I broke my heart that i was forced out over Jealousy. Anyway you do beautiful work.
Love it...
How to use hot plate tips
The procedure is somewhat fine but lots of wax os getting wasted i do my rims with max 1or 1 1/2
Very good job ma'am
That "OOH!!" after she said "increased thickness" lol
Thank you very much Docteur.
you are very welcome!
Exklusive work. Why do my new dentures and mouth look so sunken It looks like an old granny's mouth
You are a very lovely colleague!😙
😀 anyways thanks for the knowledge!
Fantastic tips, thank you so much 😁
Thank you very much 👍
Love How the dude whispers “meters”
Kota mana cantik
It is good and thinks
interesting
Mirci bokoشكرا كثير الشكر
very good
thanks alot
I love it 😍♥️♥️♥️
Ok
Right
Where are you from mam
Ansari Alam read my bio! It has all my info. Well I need to update it but it states a little about me
Tying Floss is excellent idea doc, soo helpful. Thank you
All this denture going into my mouth plus eating food I dont think so.no thank you.
Jack Basmajian there is dewaxing process. So no the wax won’t go in your mouth -.-
Dentures are not made of wax! this is the bite registration block it is used to mark things like centre line, smile line and canine line as well as centric relation. The teeth are them set up in wax, the whole thing encased in plaster in a flask and the wax boiled out, acrylic is then placed where the wax was and set over night, then ta da!! Dentures are ready to trim. 😀
And the Dentist who only wrote the prescription sells the denture to the patient 5 times more. Example: Dentist pays $450.00 & Patient pays $2,600
I remember when my Dad went straight to where a friend of his sent him. Password Three slow knocks + a short whistled. Silence, 2 short knocks and yell out loud Margarita on the rocks (twice). The door opened, quickly in, door shut, great job, big savings 😃
this is in what country the price of a removable prosthesis 2600 dollars ? in Russia Dagestan costs a maximum of $ 150. and this is their full cost.and I'm ready to do them around the clock for $ 200.
Hi. The doctor spent years to study dental medicine and not just some random job anybody can have as quick as possible. Dentists usually don't charge by the procedure or material used but how they made the procedure correctly and safely for the patient and for the license also. You can't just fabricate a complete denture without knowing how to set the teeth properly, festooning, articulating, impression taking, correct VDO-VDR, centric jaw relation, health status of the patient, past medical history of the patient, past dental history, instructions on how to take care of the denture etc..
@@egghman1323 да ладно серьезно что ли.... я могу вам такое рассказать ваши профессора с ютуба никогда об этом не знали
@@egghman1323 и с каких пор зубной техник стал доктором.. вы еще говорите о высокой стоматологии.. у нас техника даже близко не подпустят к пациенту.
🤑❤🤑❤🤑❤
ALiou. SaLL