Это видео недоступно.
Сожалеем об этом.
HOW TO REMOVE and REPLACE MERCRUISER MANIFOLDS & RISERS
HTML-код
- Опубликовано: 15 авг 2024
- In this video we show you HOW TO REMOVE and REPLACE MERCRUISER RISERS & MANIFOLDS. Installing Manifolds Doesn't Have To Be Difficult! Let Us Show You How Easy It Can Be. Boat Manifolds REPLACE on a MERCRUISER 5.7 MAG MPI Manifold & Risers Installation Complete. We show you how to remove and replace your Manifolds & Risers. We also show you how to prepare bolt studs to make your Boats manifold & Risers installation much more easier to install. Exhaust Manifolds & Risers should be replaced every 4 and a half years tops. This can help save your boats engine from catastrophic failure! Thanks for watching! Peace from the Keys!
PRODUCT LINKS:
12 PCS Allen Socket Set: amzn.to/3SLFHbE
Permatex Gasket Sealant: amzn.to/46yZyyd
12PCS Torx Screwdriver set: amzn.to/47k4iJ2
64 PCS Socket Set: amzn.to/3G3ZThi
Quicksilver Cap & Rotor: amzn.to/3MP7hRA
Grinder/Cutter: amzn.to/3sA5E3j
Permatex Anti-Seize Lubricant: amzn.to/49GFFaV
Blade Scraper: amzn.to/47imVwT
Better Boat Flush Muff: amzn.to/46e4c4t
Better Boat Flush Kit: amzn.to/47CTrJX
Better Boat De Salt Concentrate: amzn.to/3G5D0KC
BETTER BOAT PRODUCTS:
Boat Exterior Kit- www.amazon.com...
Motor Muffs- www.amazon.com...
De-Salt- www.amazon.com...
If you have any questions or comments, leave them in the comment section below. Hope you like our videos, and please Like & Subscribe!
WAYS TO HELP SUPPORT OUR CHANNEL:
1. $uper Thanks Above
2. Buy Our Merch at: www.keysboatin...
3. LIKE, SHARE & SUBSCRIBE to Our Channel
Thank you so much for your support!
SUBSCRIBE TO OUR CHANNEL:
Click the Link to SUBSCRIBE Now! its FREE! bit.ly/3uudPKh
OUR MERCH STORE:
Check out our merch store, and help support our channel. Check out Our New KBC Official Hats, and be part of the Keys Boating Channel family, See the link below to enter our merch store!
www.keysboating...
CONTACT US:
keysboatingchannel@gmail.com
OUR WEBSITE:
www.keysboating...
OUR FACEBOOK PAGE:
/ keysboatingchannel
OUR INSTAGRAM:
/ keysboatingchannel
OUR PATREON PAGE (HELP SUPPORT OUR CHANNEL):
Become a Keys Boating Channel Patron! Your support will help our channel grow and bring you more how to, and entertainment videos. To join now just click on the following link: / keysboatingchannel
BOAT U.S. (BOAT TOWING SERVICE) HIGHLY RECOMMENDED:
We use BoatUS every time we go Boating, never leave home without it! Better to be safe than sorry! I've been boating for 49 years, and take it from experience, you'll be happy you have it! and for a low yearly membership payment you'll have that PEACE of mind so you can enjoy your day boating. For more info click on the link BoatUS Link: bit.ly/3uRycRP
DISCLOSURE: Keys Boating Channel may have an affiliate Links and/or other material connection to any person or businesses mentioned in or linked to in the content above, and may receive commissions from purchases you make on these websites.
SONGS:
(Intro)
Beach Party - Islandesque by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
#exhaustmanifold #boatmanifolds #manifold #boatrepair #boating #overheating #keysboatingchannel #risers #elbows #mercruiser #diy #elbow&manifolds #spacers #exhaust #howto
00:00 Introduction
01:09 Starboard Side Riser, Spacer & Manifold Removal
14:35 Prepare Bolt Studs to Aid Manifold Install
15:59 Prepping New Manifold, Extension & Elbow for Re-Install
20:02 Installing Starboard Manifold
22:16 Installing Starboard Spacer
22:52 Installing Starboard Elbow
25:09 Port Side Elbow Removal
26:49 Prepping Port Side New Manifold, Spacer, and Elbow for Re-Install
29:42 Why you Need these Bolts Studs
30:14 Installing Port Side Spacer
32:46 Port Side Elbow Re-Install
33:37 Final Tightening of Clamps & Hoses
34:30 Sea Trial Day
36:51 Engine Flush after Sea Trial
38:50 Outro
Extremely well put together DIY manifold and riser change out. Now I understand what dry joint manifolds and risers are. The blockage must be inside the manifolds. Work was expertly done. Should be the go to video for this job going forward. Glad to hear you had no overheat alarms going off. I guess the next thing is stalking hesitation issue. Check the anti syphon valve and fuel pick up tube in the fuel tank.
Hi Mark! Hope you are doing well. Brother, thanks so much for watching and your comment. Yes, finally, no more overheating. I'll be checking those items you mentioned next. Bro, thanks again for your help and support. Peace from the Keys!
Thanks for an excellent tutorial on the R and R of the risers and manifolds. I wonder if that check ball was the major contributor of your overheating. If I run into this, I might check that first to make sure it is free and rattling. The manifold guide bolts you made were BRILLIANT!
Hi Michael, hope you had an awesome Thanksgiving. Either a blockage or the valve...but the valve is the only thing I found that may be the overheating problem. Brother, thanks for your comment and support! Peace from the Keys!
I had an issue similar to the one you describe regarding the overheating. I changed the thermostat and impeller first. Someone suggested that my manifold was blocked. Since my manifolds are the dry joint ones (like yours), I didn't want to replace it because the life expectancy on these are great (my boat is a 2005 and still has original exhaust...my overheat problem happened around 2017). So what I did first was trace the hose on the bottom of the manifolds and traced them up to the thermostat housing. I removed the hose at the thermostat housing and inserted a standard water hose into the end of the hose running to the manifold and turned on the water faucet. I had someone standing at the outdrive and they said that all kids of dirty water and rust flakes came out. If you think about it, the water going out of the manifolds when the engine is running is not under any real pressure so high pressure from a water hose would help dislodge any debris in the manifold. I reassembled the manifold hoses, fired it up on earmuffs and my overheat problem was gone. Just something to try before blowing a ton of money. Thanks for posting this video.
Hi Keith! Brother thank you so much for this tip, this will help many other boater's avoid catastrophic failure on their engine. New video coming soon for the outcome of my boat engine problems. Brother, Thanks for watching our video! Peace from the Keys!
Great job! Good watch! I hope you get business from this. I think it was good to add that it took you roughly 5 hours to do this job not including the sea trail.
Thanks so much for watching and commenting on our video! Thanks! Peace from the Keys!
very detailed and informative 👍👍
Hi Ruby! Thanks so much for watching! Blessings! Peace from the Keys!
Awesome instructional brother! Overheating issue taken care of!
I suspect that hesitating has to do with some connection somewhere. I know you replaced the harness. Wondering if there could be a short somewhere 🤔 either way, one step closer! 🤙
Thanks so much Brother. Yes, I'm working with the next thing in line. But at least no overheating, lets see where it takes us. Have a great weekend! Peace from the Keys!
Happy im in freshwater. I had overheat though from pickup pump in the outdrive
Thanks Justin! In freshwater the manifolds will last longer...and yes, the impeller has to be replaced as recommended by mfr specs. Thanks.
great video! I changed mine twice already and wish I would have know the trick with the cut bolts 😀. Just to mention it, but I think to tighten the bolts you are supposed to use a torque wrench. My spec (V6) is calling out for 22 ft/lbs in two steps (11/22)
It does call for a torque wrench. But it’s not a head gasket , so it’s not critical.
Great video. Out of curiousity, why didn't you use gasket sealer (Permatex) on manifold gasket?
Hi, Thanks for watching our video! We have never used gasket sealer on any of the manifold main gaskets, and it was not recommended by the manifold mfr instructions. It would also make it difficult to clean the block when you need to replace them 4 years later. We have never used it, and never had any problems. thanks! Peace from the Keys!
Good job captain
Thanks!!! Blessings! Peace from the Keys!
Awesome congratulations 🎉
Thank you so much 😀 Bro! Sandbar is calling!!! Lol.
That was a good video of how to change everything.
But I see what the problem was.
The valve on the first riser was stuck as you know. That shut off the water.
So you changed a thousand dollars in parts for a few dollar valve that could’ve been done three months ago and save you so much money from the parts and mechanic to come troubleshoot it.
Good video , just saying. 👍
Good advice is always welcome! Thanks Bro!
Some of these bolts need to be torqued to specifications?
Excellent video. Great tip about cutting the heads off the riser bolts to use as alignment pins for installation of the manifold. I have a 2006 with original riser and manifolds, however the first 14 years were freshwater lake use. I now trailer so I'm flushing after use in saltwater. I noticed my temp rises if I am running WOT but if I am at cruise RPM (3100-3400) I am a steady 161-165 degrees.
Before I go and spend 2k on a new exhaust I will try the flush using the hoses at T housing.
Are you running Alpha or Bravo drives? I noticed my water pressure on my B3 drive is about 4psi at cruise. Just wondering what psi you have?
Keys Boating - were those OEM parts or aftermarket?
Hi Robert, thanks for watching our video! 160 is the normal operating temperature for our engine, 165 is still good. Anything over 180 could be a problem. Descaling flush could help, but in my experience we had an internal blockage that caused the failure. We have a Bravo 3 outdrive, and don't have a water pressure gauge, which could be very important for these engines to have. Peace from the Keys!
Install a closed cooling system and cool the manifold with antifreeze
I just installed one on my engine
Hi, thanks for watching our video! Sounds like it even would last longer with coolant. Thanks for your comment! Peace from the Keys!
Youve been dealing with overheating for a while now.... I remember you did the descaling and you tried replacing the thermostat before and now you're trying to do this salt away again aftee replacing exhaust ...is that accurate?
How many hours is on the block? Was it a rebuild? I think 20 years in saltwater likely means "new engine" time unfortunately.
That's what it meant for me...I just ordered a turnkey 5.7 from Michigan Motorz. My '92 kept overheating also ...I did everything you did...one day it hydro locked and I said screw it.
Hi, thanks for watching our video and your comment. The overheating part is gone after the manifolds and risers were changed. Now we only have the stalling. Our engine block is only 4 years old. We have determined that it could be my Fuel pump at the port side, its the one inside a plastic box. Its located in a very bad location to get to, and its the only pump that's 20 years old factory original. Since we are going to replace it, we will also replace the regulator, and fuel cooler. Let's see I'll keep you updated on the next video. Thanks for asking! Peace from the Keys!
anyone have used merc 260 marine Y joint manifolds and risers? I need to rebuild a saltwater system.
Hi, never done one here. But go to Facebook, there are groups for almost any merc, engine size. Maybe there you will find the info you need. Search for Groups Mercruiser 260 owners. Hope this helps! Peace from the Keys!
Where did you purchase from.
Hi, thanks for watching our video! Tools and supplies are from Amazon, see links in the description of this video. The manifold set we bought from Ebay. Peace from the Keys!
Also for the plugs being so tight , that sucks you went all the way with them. Great for you though that it didn’t crack the case.
Pipe threads are tapered. So making them so tight , it’s like screwing a wedge in there.
Don’t do that on a water pump. It will never stop dripping. Cracked case. Cast iron cases is hard , but very brittle.
All coming from a pipe fitter / pipe welder , and rebuild engines. Lol. With a boat.
Hi Eric! Thanks for watching our video! Great information to know, this will help others to avoid a problem. Thanks brother! Peace from the Keys!
✌🏼from Northern Maine. 🏔🎣
Welcome!!!