ID Card Scanner using NodeMCU, MFRC-522, esp-rfid firmware, and of course, Home Assistant
HTML-код
- Опубликовано: 7 сен 2024
- Buy the IC Card Induction Module
bit.ly/2sz4mT4
www.DrZzs.com
IMPORTANT LINKS:
Amazon Link: amzn.to/2rCQPcw
Patreon: / drzzs
Twitter: / dr_zzs
Instagram: / drzzs
More Links:
ESP-RFID repo: github.com/ome...
CP210x driver: www.silabs.com...
FlashEZ: github.com/let...
Home Assistant Automations:
- alias: RFID Office Lock
hide_entity: true
initial_state: 'on'
trigger:
- platform: mqtt
topic: esprfid
payload: 'Justin'
- platform: mqtt
topic: esprfid
payload: 'Janis'
action:
- service: switch.toggle
data:
entity_id: switch.office_lock
- alias: RFID Shop Lock
hide_entity: true
initial_state: 'on'
trigger:
- platform: mqtt
topic: esprfid2
action:
- service: switch.toggle
data:
entity_id: switch.shop_lock
Like you are in my mind for any next project! Thank you for your effort and time making those videos
you're welcome!
We are all just parts of one collective mind, like the Borg. :)
I'll keep making'em!
Awesome ! Thanks Justin. RFID to open door, presence detection, disarm system, play music to put the kids to sleep...unlimited potential ! ESP32 with bluetooth next ???
Thanks!
I'll put the EPS32 on the list. I would really like to see what it can do.
WOow, i ordered the parts a month ago because i thought it was cool and would come up with a project when they arrive. Now you made a video about it... AWESOME STUF. Sub + like
Awesome!
Thanks!
You produce AMAZING videos. I am learning A LOT with you, thanks and please keep the great job going.
Thanks! I'll try to keep making good stuff
Great video, thanks
I only wish there was some security then just the ID number of the card.
BTW, I came across a video where the RFID writes a code back to the RFID tag each time it is used, then expects that code the next time you try and scan in. At least that way, if your tag gets cloned, but you manage to scan in before the clone, it will expect that code the next time a scan is made, which will prevent the cloned card from working. Also when your tag doesn't work, you will know it was cloned and you can take appropriate measures.
Link?
Midway through writing my own code when I came across this... it's not very often you come across code that does EVERYTHING you're looking for
Sweet!
The .bin folder from the ESP-RFID repo: github.com/omersiar/esp-rfid esp-rfid is missing the firmware.bin file.
In the older release 0.81.1 I found two bin files, forV2Board.bin (498k) and generic.bin (510k).
Can one of the two bin files used instead of the missing firmware.bin file ?
same question
great timing I am using Hooked Up node red video to start a home alarm and wanted to add tags great video thanks
perfect!
My mindreaderinator is working!
This was just the thing I was testing on , I have the PN532 board , nicely done 👍
how's it working? are you able to use NFC from phones?
DrZzs current I’m on a epic bike journey towards Leh Ladakh , once I’m back home will send it over to you. But this project looks better interms of management and stability, does it have any security concerns ?
Hey Z, i got it working on the PN532 board, its completely working like it should, im using a WEMOS D1 mini pro for my tests, took me sometime to get the GPIO pins right even with the diagrams, best thing is its also working with cellphones(used a One Plus One 3T NFC) and it works like a charm.
There is no firmware.bin file in the archive. Where can it be downloaded? could you put it on google drive?
Dr. I can confirm that the key rings are interchangeable from one RFID to another RFID ... I just bough a frid what came with one card and 6 key rings and I can use the key rings on both FRID at the same time to do automation. one at from door and the 2nd at the garage door
Excellent!
Great Job. Definite something I wanna play with and you made it a lot easier to understand.
Thanks!
that esp-rfid sketch is awesome!
Mil gracias ☺️☺️
Your head is cracking me up
another fun project! Thanks Doc!
Keep cranking!! Still waiting on octoprint.
oh, thanks for the reminder!
3:53 you say you have had problems if the chip is not restarted regularly.
Well.. that is because it's an Arduino.
Inside an Arduino there is a counter that counts the "uptime".
When that counter reach it's limit the counter can't count up anymore and the Arduino stops.
That happens after 42.5 days on most models (or all, not sure)
Nice project:-) maybe in future autor add options for scan secure block on rfid card with keys will be very nice.
thanks!
good idea
i do not raccomend to use this for any security... any message sent to that topic will trigger the lock.
Right, but your wifi should be secure anyway.
Hey, in the new firmware ver the mqtt works different I found the solution on the HA forums
Please try:
create a sensor:
Copy to clipboard
- platform: mqtt name: "rfid_reading" state_topic: "rfid/send" value_template: "{{ value_json.username}}" expire_after: 2
…check if the sensor is showing georges for two seconds, when you´re holding card in front of the reader.When working:
create automation (card name=georges)
Copy to clipboard
- id: 'testfrid1' alias: testrfid trigger: - entity_id: sensor.rfid_reading platform: state to: 'georges' condition: [] action: - entity_id: switch.sonoff service: switch.toggle
Thanks to heine79
I also followed these instructions my heine79 link for easier C&P here:
community.home-assistant.io/t/esp-rfid-mqtt-do-not-work/125624/21
Nice video and well explained. I have this running with a connection to home automation, but without the lock and looking how to implement something additional. Specifically how can I set a pin high via a script at the NodeMCU while using ESP-RFID? With this I would like to see if the alarm is enabled or disabled.
can anyone help me out , i cannot find the firmware.bin file and the flash.bat file once openned dosent actually flash
Hi I am unable to configure Home Assistant Yaml file request you to make step by stem video on this which toggles the switc.
love it "put the kids to sleep and insert them surgically"!!!!
Hey :D
Love your project :)
But when i download the RFID files from your link, i doesn't contain the firmware.bin like it does in your video?
Have any suggestions on what i shoul do?
Things has changed in the files that are downloaded.
You need to use the generic.bin file
In the video, he takes the firmware.bin file and places it in the same folder as the flasher, instead of searching for it.
DrZ. I flash my nodemcu with Tasmota and they came back to life... until now they was not working at all with espeasy nor any other .ino file..
maybe this can help other who esp went down
Hopefully they see this and try it.
It is really really hard, maybe impossible to "brick" or ruin an esp chip with firmware.
Hmm...well, I got the NODEMCU flashed, logged into the esp-rfid, but after connecting the RC522 module to the NodeMCU, it won't boot and get an IP. Did you have that problem?
the project is just one consistent problem, trash it!
Got the same problem🙄 Any solution found?
sir, how to use the 5v relay module, because I use NodeMcu v3 there is no 5v output power only 3.3v, so the 5v relay module doesn't work, I've tried using (step up module) from 3.3v output but the 5v relay module doesn't work, please the solution, thank you.
could not find firmware.bin in the folder
New name is "generic.bin"
hay @@IceTJaM2 i could not find the generic.bin file was it changed to somthing else , the flash.bat file also dosent actually flash anything ig
Thank you for a nice tutorial
Did that answer your questions?
Hope it helped!
It really is a nice little system.
Hello, great video. How did you wired the 12V lock to the nodemcu board?
Thanks for another great video. So, I ordered. BTW, on you last video or two the audio level was much lower than before. I liked the previous level better.
oh ok. I'll work on adjusting that. I was probably sitting further from the mic. I'll watch that closer next time.
Thanks!
Hi Justin, i am planning to make the rfid tag with nodemcu board. I’m looking on banggood for the node mcu board en there are more than 1. Does it matter what node i use? I have found some esp-12F board and LoLin v3 ones. What do i need to use?
When the nodemcu connects to my wifi. The nodemcu wont open its hotspot and im not able to connect to it and open the webpage. Why? When i dont open my wifi im able to open the webpage but the rc522 isnt reading my rfid tags either. What do i do?
How do I connect the arduino to the display to how OK when RFID scanned
Thank you very much, what is the maximum number of people I can add?
A lot
there is no firmware.bin file can you give me the link
Hi in every Version is a generic.bin that you can use
olli there is no generic.bin!
@@lasse9197 github.com/esprfid/esp-rfid/releases/download/1.0.2/esp-rfid-1.0.2.zip open the zipfile and there you find it
Great video
I just recive from AliExpress the same components and didnt know hot wo connect them .. Perfect timing!!.
I plan to use them for mqtt alarm do you maye know how i would toggle it between armed and disarmed ?
Could you post some code maybe?
I haven't done that myself but if I were going to I would follow this:
www.home-assistant.io/components/alarm_control_panel.mqtt/
There's an example there too for your config.yaml
What alarm components do you have that you plan to use? You'll have to do something with automations or node-red to get all the sensors and such to respond the way you want when your alarm is Armed or Disarmed.
Hi, great video ! it seems exactly what I'd like to achieve. But, do you know if it can be compatible with JEEDOM ??
This is the first I've heard of Jeedom. If Jeedom can interface with mqtt then yes, this will work with it.
Hope that helps.
@@DrZzs thank you for your reply. I am not familiar with mqtt. I will look for it and see if something can be done.
٩
hi there i am trying to build a project like this but not a door lock it is an online attendance system the only tool i want to use is the Rfid and the esp8266 . i would be happy if you would be able to help me out is this project .or if there anyone can help me out in the comment section no door luck just the rfid esp32 and store the data on google sheet
Good Evening
Video is very good. I have a problem connecting to the MQTT. Can you explain it to me a bit because I don't know many things
Sorry for the late reply, but the best way to get help on this sort of stuff is to join the discord server. The link is in the description. You can get a lot of help from lots of smart people. It can be very difficult to troubleshoot over comment section.
No link to discord
Hi Dr, great video again. Any chance of doing a video on home-assistant-tiles in the near future? Cheers
Thanks!
I haven't looked at home assistant tiles, but I can put it on the list.
Do you have a link to some info so I can start the research?
github.com/c727/home-assistant-tiles
thanks a lot
Thanks for this video. I have a NodeMCU. I can flash it to clear it and then flash it sucessfuly with these binaries: 1) 0.9.0 2) 0.8.3 and 3) 0.8.1. I can connect to each wifi hotspot and then see the page of each with 192.168.4.1. However only the last of these binaries will save the new settings as a client then let me connect through my modem router. Any ideas why I can't save changed settings in the first two? Thanks. ps I flashed with esptool.py.
I am unable to send the RFID messages via MQTT with everything setup correctly. Even tested the MQTT server with an external app, so it works just fine. Can you help me with this?
i would love to have the .bin you have because I have not been able to get this to work with what they provide on github. starting to think its just a clever way to sell components
I couldn't find the bin file either. Where did you end up getting it from?
Hi I decided to make that rfid controller for my automation.
But when I download FW in that folder BIN is only blank4mb.bin whois 4mb of nothing.
by the way you videos are great.
Do you have maybe fw for upload or someone here.
Thx in advance
Are you using Home Assistant? You can do this with ESPhome now.
@@DrZzs Hi, yes I use HA.
Thx for that info... BR
Hello Dr Z, thanks for the awesome video. I was wondering if you could help me to set this up in home assistant. what will be the configuration.yaml setup to show up in HA.
Thanks!
You mean to setup the door lock? Since ESP-RFID sends an MQTT topic the only setup you need is in the Automations.yaml, just to tell HA what to do when that MQTT message is sent.
If you need to know how to setup the door lock in HA, it's just an MQTT switch entry. It'll look something like this:
- platform: mqtt
name: "Shop Lock"
command_topic: "cmnd/shoplock/power"
state_topic: "stat/shoplock/POWER"
qos: 1
payload_on: "ON"
payload_off: "OFF"
retain: false
I set up the locks in another video:
ruclips.net/video/M76g81G3bi8/видео.html
Hope that helps!
Good Luck!
be prepared to not use a relay with this as no matter which gpio pin you select the relay will be stuck triggered after reboot. htf does this get missed?
DrZzs this sensor will cut the need to add a sensor for each name when doing automation.
question, where did you get ur extra rfid card from... I got a pack of 10 off ebay a year ago but the do not work. only the one that came with the rfid -RC522 will scan.
sensor:
- platform: mqtt
name: "Office Lock"
expire_after: 3
value_template: "{{ value }}"
state_topic: "esprfid"
qos: 0
Awesome! Thanks Bobby! That's useful.
I got a pack of 3 sensors with a card and keychain with each one. I don't know enough about the different RFID readers to know which cards work with which sensors. Someone pointed out that there are sensors that will read the NFC from a phone, but this scanner won't do that.
I still have lots to learn.
Good to hear from you again. Maybe you've been around and I hadn't noticed :)
Amazing tutorial, also you can make the same for Alexa community, We will appreciate, congratulations.
Hi, brilliant explanation as always, however I cant figure out how to set a static ip address for the device. Any ideas ? Many thanks
That's going to be a setting in your router. You'll have to google how to reserve IP addresses for devices in your specific router.
Thanks, I was hoping it would be possible to set a static IP address in the configuration of the individual devices like you can in Espurna and Tasmota. Thanks again for the excellent videos, in my opinion the best on RUclips.
I have loaded this on several esp8266 I even have one team with it on an uno esp8266 board. the results are the only thing consistant. no way to trigger a relay. 0 change in gpio pin state no matter what pin you select. if anyone has this working with a relay i would love to see a video of it. the only answer i got from their contributors was about not being able to drive a 5v relay from 3.3v and i think the suggestion was to try a l7805 but i'm not sure what that will do. is there an L7805 that makes voltage from nothing? the relay is powered from an external 5v source. lol DRZz can you bench this and confirm?
can a nfc tag be used at the door to toggle the lock
Hi Doc have been trying to do this for 2 days now on the git hub the firmware.bin wasn't there so in comments found someone had a link to generic.bin installed that. set up as you say then save and reboot then when click 'Try to reconnect ESP' says 'Cannot be found '. Any ideas. Thanks
hay did u find the firmware.bin file ?
I know this video is old but what version of esprfid did you use. I tried their "stable" 1.0.2 and the WiFi is screwed up and also tried a few of the older versions with no success.
Try the 1.3.3 which works great on my side : github.com/esprfid/esp-rfid/releases
this is not working anymore i guess, when i try to read the card does not happen..anyone?
Same, I'm trying out some of the old versions but there are problems like password credentials not even being covered
Hello,
I followed your tutorial, but I can not control my module SONOFF switch basic
I installed the ESP-RFID, I assigned the badges, I configured the parameters MQTT (the module is well connected on my MQTT broker on home assistant)
On esp-rfid there are other settings in the Hardware settings menu I do not know what to do.
(wifi led, door status, open lock pin, ...)
When I pass the badge on the reader, it is well identified but nothing happens, the switch does not change state
thank you in advance for your help
Regards
I have the same problem too
¿no encuentro el archivo firmware en la carpeta de esp rfid stable?
What case do use for the sonoff sv, nodemcu, touch buttons? They don't have a good aesthetic appeal just laying around.
I've 3d printed most of the enclosures myself. I usually search Thingiverse.com and find something that'll work for my purposes.
Another good option if you don't have access to a printer are the travel soap boxes from Wally-mart or the dollar store. Usually $0.50 or $1 and you have a nice plastic box with a clip lid that'll fit several components. And they have different colors. :)
Mine firmware is not working properly
It is not saving any settings and after clicking save and reboot it stays in access point mode with all the settings as factory settings
Also it is not recognising any RFID cards
But I can use the setup properly in an Arduino sketch
uh oh.
I haven't played with this program in a while. I'm not sure what might have changed. Try the ESP-RFID github, they should be able to give some guidance.
Maybe someone is already working on a solution to that problem:
github.com/esprfid/esp-rfid/issues
I have the same card reader as you, but with mine the range is too low. I can't even put a small plastic case around it. is it the same for yours?
I haven’t tried a case on it. That would really be crappy. I’ll have to try it. Maybe there’s a way to adjust it or boost it. I’ll have to look into it.
Hi do they do a FlasEZ for Mac? I can not find it but am in China at the moment so may not be able to search all sites
no... It's a .exe so won't run on mac.
There's probably another way to just load the .bin
I need to learn to use PlatformIO. That might be the next-easiest way to do it.
Thanks - I do have a pc but love my macs so prefer to use them.
@@pjbear1813 NodeMCU-PYFlasher for mac, google it
Yuka Sinata thanks will try and google as in China
I have been looking for this for a long time.... I got it working but it will only scan the one keychain rfid chip it came with.... I bought 10 card rfig and 10 extra keychain rfid chip. for $1. the 10 extra keychain chip I got looks the same as the one it came with but they will not work. I have the same rfid that you have.
any ideas?
Hey Bobby!
I got a set of 3 readers and each had a card and a keychain. I know there are some readers that work with NFC on phones, but this reader doesn't do that. I got these from BangGood, I know they have packs of cards too.
Maybe the cards can be programmed with a code and yours didn't come with a code already on the chip? I know I've seen videos about cloning cards. Maybe that's the answer. I don't know much more about it than that. Sorry.
It might be that this reader doesn't provide enough of a magnetic field to induce the card to activate, but that's less likely.
Nice video, how about the video on the touch switches(1,2,3 gage) and ifan02? Thanks
T1 switches are next. I've done the research, just gotta do the flash and film.
They are definitely the most complicated flashing process of all the Sonoff devices.
The Fan02 is still in transit. I haven't seen it yet. That one will take a little longer.
I actually managed to flash tasmota on a T1-UK double gang and all seems to work, just need to stick it in the wall now!
I did it the hard way though using the audrino IDE and an FTDI serial adaptor I had lying around :D
Drzz, thanks a lot. I hoping to see a few things, 1 does the 3 gang switch fit horizontally in a normal 3 gang switch box so I can get rid of current 3 switches. And 2 will 3 1 gang T1 fit in a 3 gang vertically... trying to decide the best solution to meet the wife meter and not have blanks.
The dimensions for the T1-US are here - dl.itead.cc/T1_US/wiring-2.jpg ... but it appears to replace a single US switch, so if you have three independent switches you would have two blanks, however if all three switches are in one "module" then it would replace that - sorry I can't be of more help but our UK ones are completely different (square)
Ash K thanks a lot, that's kind of the issue, I can only find videos on the UK versions. And if I find a US version it is only one switch which does fit sideways in a US switch box.
Nice, my only question would be on the shop lock ... doesn't having it activate on "any" rfid input mean that I could just walk up with any random card out my wallet and gain access?
well.... yes... I shoulda thought about that...
Excuse me for a minute while I go change that ;)
The better thing to do would be to list all the RFID codes/users for my family.
Good catch!
Thanks!
:P
Is there an option for the module itself to "ignore" any codes not in its database, meaning that no message is sent out on MQTT and then that would save having to write out a long list of rules in HA?
good question. I don't know, but I wasn't looking for it. I'd be surprised if it wasn't in there somewhere. They were pretty thorough.
Hello Dr. I have massive WIFI Problems with that ESP-RFID, how did you get this working? I tried it with NodeMCU and with a wemos d1 pro. Sometimes it does connect to my AP but mostly it doesn't. Which Version did you use?
Flo's Videos exact same WiFi issues, appears then disappears.
If I do manage to connect, it does not save the settings.
Hi, I got that working now. You have to flash the NodeMCU with the Blank4MB File and after that I flashed it with the stable Version again. I had to do it a few times until it really worked.
same here. Connects the first time, then reboots and then cant do anything. Seems to do it rgardless if you add your wifi details in or not
Mine has started disconnecting and not reconnecting also.
Maybe I'll try the blank4mb flash and see if that fixes it.
I'm also going to re-try tasmota soon and that may be a better solution anyway.
Same problem - I can flash first time no problem, enter the menu, set the wifi details, then when I reboot it won't connect and the only way I can get access is to flash the blank 4mb file and re-flash the image. Tried it with a nodeMCU and Wemos 1d - both exactly the same so it must be a software issue somewhere. Even tried reconfiguring my wifi network and connecting to a different AP, all to no avail. Shame, I really wanted this to work. Will have to wait for another version and hope it's fixed.
Wonder if this would work with NFC from a phone...hmm...
dang, I shoulda tested that!
In my quick googling it looks like you need the PN532 reader that this same firmware supports to do NFC phone stuff.
If you want I think you can use your phone as an nfc tag. If that's what you need
Excellent!
guess I'll be ordering a PN532
Thanks Travis!
Make sure you Google on that a bit more than I did as I don't offer refunds! :)
Woooao amazing
Thanks man!
Cool
thanks!
I can not upload firmware.bin, the "flash failed" error occurs. Win7 64bit pro; Doit Esp32 Dev Kit 1;
Chip is ESP32D0WDQ6
@@augustoalves2952 I think it's ESP8266 only?
Can I Use NFC Tags with RC522? Thanks
yes, they both function on the same tech.
Superior tutorial as always! I am stuck a bit with the relay control. I have a status report via mqtt but I am unable to set an mqtt output for relay switch. I also hit the test button on the esp rfid hardware setting page and it do not send the status of the relay. I tried the # simbol as topic which means see every topic. Still nothing. Any idea? thanks.
I use node-red
I'm not sure where to help. I'm not very familiar with nodered (still ). If you aren't seeing an messages even using #, then I'd guess there's a problem connecting to your broker. Double check all the broker connection details.
@@DrZzs Funnily the status of the card reader is publishing. so anytime I scan a card I have all the details via mqtt. But other than that I have nothing. I unable to switch the relay via mqtt. On another forum someone mentioned this firmware does not support the remote relay control. Which would be very strange. In reality, I have had a bit of difficulty to install the firmware, anytime I connected to the wifi, it is connected to it, it was there under a certain IP address as I have seen it in my router dashboard, but I was unable to reach in the browser. Several reflash did the trick and it is working now, partly. Thanks for your replay!
the firmware.bin is not available in the git repository
hay did u find the firmware.bin file
I Got NodeMCU v3. ESP-RFID v.0.8.1. Flash tricky but ok, still work. Then Setup Wifi etc, all fine. Setup Hardware and SDA Pin, ok. But RC522 nothing do. It could not read anything. You know why?
same thing with me! ever figure it out?
@@tatertott same here. any solutions?
when come a good firmware im problem esp-rfid the mqtt server lost connection 60 a 120 sec and disconnect when restart then working for 60 a 120 sec or some 4 minutes and then lost again the mqtt connection a again an a again can anny body help to good firmware download I've already tried a lot. not annt firmware wil good working . mister DR ZZS can you help for good firmware new revision or bux fix .. i use Node MCU V.3
Sorry, I haven't tried this project in a long time. Is the repo not being updated?
github.com/esprfid/esp-rfid/releases
Looks like the last release is from Jan 2019, so maybe it's not a very active project anymore.
I believe ESPhome has an RF card reader component, so that may be something to try, but it would require learning something new.
Hope that helps.
The automations are not working...
Can you give me some more information? I'm sure there's a name or some unique ID that needs to match your setup.
@@DrZzs The payload feature isn't working. All is working without payload
@@M.4y Agreed. If I have payload: 'name' in the automation, HA ignores the trigger. I can add a condition to the automation that looks for 'name' in trigger.payload but not if I add it to the trigger.
@@jongriffith4293 Hi did you ever made it work i am really frustrated because my automation is not working
@@jongriffith4293 hi Jon, Ive got the same problem......can you ple give me an example of your condition? thank u
How to change the html?
Could you give me a link to a real mifare 1k on aliexpress?
What other RF modules are compatible and do you have any suggestions for water proof enclosures?
That's a good question. I'm not really sure what other RF keys will work with this reader. I know there are 2 other readers listed for this esp-rfid software. It works with RC522, PN532, Wiegand readers. Maybe others too but I don't know.
I haven't decided on an enclosure for mine yet. I'd probably design and 3d print something myself then seal it with silicon. But if I didn't do that I'd try something like this:
amzn.to/2JUmrGy
I haven't measured to make sure those would fit but they seem about the right size.
there are a lot to choose from on amazon
amzn.to/2K1v1PS
I have bought some Wiegand readers from ebay.
125mhz , Size :28mm×80mm×12mm, totally waterproof.
UK ebay item number 332663312018
US ebay item number 162381596706
Also I have found out that you can flash directly to the nodemcu through its usb port from your computer as it has its own serial converter built in.
there is no such file called firmware.bin
Здравствуйте. В вашем проекте на github нет файла firmware.bin какой файл использовать вместо него?
Hello. Your github project does not have a firmware.bin file, which file should I use instead?
hay did u find the firmware.bin file
hi i am a bit lost with the configuration.yaml and automation.yaml your examples are not working maybe i do something wrong. I'm on the newest hassio version i try all Firmware's but the payload ist not working at all. Could you maybe send me an example of what is nessecary in config and auto yaml because i really would like to make it work
It's possible that something has changed since I made this video. I haven't been using it in my home, so I don't have any further updated settings.
maybe come to discord and share your settings and we can see if something looks wrong.
www.discord.me/drzzs
ok but no one answer
Hello olli, I just stumbled over the same thing (8 month later;)
The action isn't triggerd with the specified payload (bug?).
I managed to get it working with a workaround.
My automation looks like this:
- alias: RFID Buero
trigger:
- platform: mqtt
topic: esprfid
condition:
- condition: template
value_template: '{{ trigger.payload_json.uid == "59b5cf56" }}'
action:
- service: notify.TelegramToFlo
data:
message: 'RFID Test'
You can also use trigger.payload_json.username if you prefere usernames.
That reader won’t work with the implantable rfid will it?? I want an important but my partner doesn’t so I need to find out what reader works with both. It’s got something to do with the frequency
I don't honestly know. I'd have to research that a little. I haven't watch Superhouse.tv's video in a while, but I bet he talks about which reader and which chip you'd need.
Let's check into implantable GPS chips too. I've got teenagers...
DrZzs awesome you watch John Oxer too!! I love his stuff but it’s all a bit over my head!!! Iv just reached out to the company that he mentions in his door lock video so I will find out tomorrow hopefully.
let me know!
It's such a cool concept. He's a REAL electronics guru. I'm a hack with a camera :)
DrZzs ok long story short yes you can use a implant on the same reader as a tag. As long as it’s compatible with the same protocol and frequency. The priority 1 design website didn’t help but there’s a bit of info on dangerousthings.com and SparkFun.com.
sorry DrZzs, i don't find firmware.bin in bin folder on github.com/omersiar/esp-rfid. Help me please. Thank you
The owner of that repo may have changed things. It isn't my code. You'll have to contact them directly. Sorry.
Thank you so much
Hi Doc any suggestion for a enclosure to mount this in?
Soap dish. Surprisingly versatile.
@@DrZzs Thanks Doc
this video is out of date. anyone know how to do it now? I tried the GitHub way but failed
same problem here, the cards just dont read at all
Haha, so next DIY is how to surgically implant the RFID chip...🤣
shhhhhhhh
we don't want them to know it's coming
HELP ME ASAP I CANNOT ACCESS THE SERVER FTER CHANGING THE SETTINGS
uh oh.
I supposed worst case you can re-flash the NodeMCU.
Sorry you're struggling. Not sure how exactly I can help.
Good luck!
@@DrZzs thanks it worked I just needed to wait longer !
Is it possible to make the card not copy-able?
I don't know. Probably not.
Can you make this with a fingerprint ? Please 🙏🏼
I'll put it on the list. That'll require some unique hardware. Should be fun to figure out how it works.
Does anyone have the Firmwire.bin file ? Not on GitHub Anymore
search for release, find version 0.8.1. The one on the main page are vers 0.9 and yea it isnt available for some reason
@@YukaSinata I could not fine the Firmware.bin in that release either. Could you place a direct link to where it is exactly at please?
hi bro i tried with three rfid readers and also checked the pins rfid is not working what to do ??
hmmm. What are you using to activate the reader? Did your scanner come with cards that already have codes? Some are blank and need to be programmed. That's unlikely to be the problem, but it's possible.
If you can post more info maybe we can help. Try posting in the Facebook group or Discord. Maybe someone there would know better what might be going on.
yes it came with cards and i think they are already have codes if not how to code the cards
??
and whats your facebook address
firmware.bin missing please help asap
Hi Hemang go to the link github.com/esprfid/esp-rfid/releases and download zip file and unzip . flashing the generic.bin . sorry i am litle write english :) regards
Great video, although I will probably skip this one. Do you have a reader INSIDE your office, so when your wife locks you in, you can get back out? Otherwise, ........ ;-)
ha!
It's okay, I've got a fridge in there and enough Dr Pepper to last at least a week.
Ah, good. Make sure your recording equipment is in there also, so the videos can continue.
Hi Dr. question to you or anyone else... I just got 2 nodemcu from amazon. after I flash the software I went into 192.168.4.1...
I setup the RFID after I reboot nothing... it does not shows up in my wifi scan anymore. brand new nodemcu just got in the mail...
I tried to flash one again with the firmware bit its like the nodemcu is dead any ideas. ??
Can you look at it through the serial monitor? Use Termite or Putty to connect to it and see what it's doing.
all l did is install the rfid bin it work fine on setup but after l save the reboot they never came back up
oh right. Sorry. Forgot this isn't Tasmota.
I'm not sure why that would happen.
Maybe post and "Issue" on the github and see if the Devs have some ideas.
github.com/omersiar/esp-rfid
I had the same trouble. After flash the firmware.bin, I found the network and then I applied the changes (My SSID and Pass) but after reboot the module dIdn't work again. After, When i connected the wemos to the computer it started to fail (Mouse, screen). In conclusion: This motherfucker project destroyed my Wemos D1 MINI!!! This is a "GREAT PIECE OF SHIT" in a ".bin" format.
WARNING: Users with Wemos D1 MINI, DON'T TRY IT OR YOU WILL DESTROY YOUR DEVICE!!!!
I notice if I use the ver. 1 nodemcu it will work fine and don't destroy it.. however, when I got the 2 ver 3 nodemuc both were destroy..I like the ver3 nodemcu because has a VV pin when powered by 5v or 24v, the VV pin give you that voltage to power your relays vs. the ver 1 nodemcu which only has the 3v output. I have one ver1 that working fine. I will just get another ver1 nodemcu to use on the 2nd rfid I got .
My parts came. But having all sorts of problems. Mostly my doing. Finally got to the point where everything was entered and it was supposed to restart. Never did. Hate to start over. While I am here.. I have never got 192.168.4.1 to work on any project using W10 Edge and Chrome. I tried it on my iPad and it works. Anybody have any idea why? Again great job
can you clone tags with this at all? or its just a reader?
I don't know the details but it seems you can.
ruclips.net/video/fyr4sYbB-Mo/видео.html
There are a few videos out there about it.
Let me know if you figure it out.
yea i have been trying this, watched the vid a few times, i have come to the conclusion after reading a few forums that i need to solder the headers on, alot of people have been having issues with breadboards and the rfid reader. so ill have to go buy myself an iron before i can do it
This is the one I have:
amzn.to/2u9iFOV
You'll want some kind of holder though. So maybe one of the kits that has a holder would be better.
Using really thin solder helps a lot too. This is what I use:
amzn.to/2MUmxLt
I think there is some even smaller too.
Good luck!
I'm just going to go down my local hardware store, is there a min wattage I shouldn't go under? Will 40w be ok you think?
GPS > RFID for child implants
AMEN!
gotta research implantable GPS chips!
Dr, I am trying with new nodemcu V3, I can record the fiimware and access the frontend, but when done the configuration of the pinion the player does not work, I can not read the tags, can there be a problem in the pin? Congratulations for your work !
hmmm
Sorry, I wish I could tell you what the issue is. I believe my NodeMCU is V3. Maybe give me some more specific information about what errors you're getting and I'll see if I can help.
The ESP-RFID github page may be another good place to ask for help.
github.com/omersiar/esp-rfid/issues