RED LION BASIC 02 - Communication Setup For ControlLogix PLC, Crimson

If this video is helpful, please like, share and subscribe to my channel! Thank you.
5:43 How to Download.
Red Lion Communication Set up for ControlLogix PLC
Export PLC program to L5K file
Basic Red Lion HMI programming

[@carlosantoniotorres3342]

I did everything right, but when I interact with my physical HMI, no button is activated, it remains without doing anything, what could be the problem?

[@SYPHOANG]

@carlosantoniotorres3342: There should be a reset button somewhere. Unfortunately I never saw one without the button.

[@zainulhakim9583]

Isn’t the stop button supposed to be NC? Bcos in logic from rs5000 you put NC

[@SYPHOANG]

@zainul hakim: @4:53 The stop button needs to be NO because the out put will be de-energized if it is closed. That is how XIO works- examine if open. When the instruction is executed, if the bit address is off (0), then the instruction is evaluated as TRUE. It is a bit confusing for XIO. Thank you for subscribing to my channel.

[@zainulhakim9583]

@@SYPHOANG so NC only for logic but hmi it is NO bcos we need to put 0 as command not 1. Right?

[@SYPHOANG]

@@zainulhakim9583 yes, you got it.

[@mustafakaracalar3953]

Hello again. I have a problem I hope you can help? I want to upload redlion g310 hmi. When I want to connect with usb cable and crimson 3.1, I can see the information on the memory card. It doesn't offer any other options. where am I going wrong.

[@SYPHOANG]

@Mustafa Karacalar: Maybe the HMI itself is locked.

[@mustafakaracalar3953]

hello.upload is very easy but download is very difficult and complex. I couldn't understand the download process.

[@SYPHOANG]

@Mustafa Karacalar: you can also download with a USB cable. It will be easier.