- Видео 242
- Просмотров 1 283 827
SY P HOANG
США
Добавлен 24 май 2019
If my videos are helpful, please like, share and subscribe to my channel!
A "super thanks" is always a great way for everyone to show the support to my channel and the appreciation of the experience I have been sharing.
A channel membership is only $6.99 a month. My email address is available for all channel members for a much better communication.
ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin
As a self learner, I know how hard it is to learn something new especially when it comes to PLC/HMI programming/automation. This channel is not only for those who are interested in programming but also for myself to quickly recall what I have self-learned in the past.
Most of the videos are very short (less than 10 minutes), straight forward and focus on the video topic.
My channel goal or top priority is to share all my experience, skills, knowledge to many people as possible.
Thank you for letting me help you advance further in your career.
A "super thanks" is always a great way for everyone to show the support to my channel and the appreciation of the experience I have been sharing.
A channel membership is only $6.99 a month. My email address is available for all channel members for a much better communication.
ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin
As a self learner, I know how hard it is to learn something new especially when it comes to PLC/HMI programming/automation. This channel is not only for those who are interested in programming but also for myself to quickly recall what I have self-learned in the past.
Most of the videos are very short (less than 10 minutes), straight forward and focus on the video topic.
My channel goal or top priority is to share all my experience, skills, knowledge to many people as possible.
Thank you for letting me help you advance further in your career.
Allen Bradley Modbus TCP Client AOI for ControlLogix and CompactLogix PLC
Join this channel to get access to perks:
ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin
The link to download the AOI's is below:
www.rockwellautomation.com/search/ra-en-US;keyword=Modbus%2520TCP%2520Add-on;startIndex=0;activeTab=Sample_Code;spellingCorrect=true;facets=;languages=en;locales=en_GLOBAL,en-US;sort=bma;isPLS=false;sessionID=c4b0158c-0c61-cc3b-3e32-57f187815de0;deepLinking=false
ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin
The link to download the AOI's is below:
www.rockwellautomation.com/search/ra-en-US;keyword=Modbus%2520TCP%2520Add-on;startIndex=0;activeTab=Sample_Code;spellingCorrect=true;facets=;languages=en;locales=en_GLOBAL,en-US;sort=bma;isPLS=false;sessionID=c4b0158c-0c61-cc3b-3e32-57f187815de0;deepLinking=false
Просмотров: 156
Видео
Beijer M series IOs Part 5 M9289 Modbus Special Registers/Info & Statuses
Просмотров 4614 дней назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin If this video is helpful, please like, share and subscribe to my channel! Thank you. Part 1: ruclips.net/video/t4oQJg6myZE/видео.html Part 2: ruclips.net/video/TdUJ1LYpraY/видео.html Part 3: ruclips.net/video/yc79fL6ULf0/видео.html Part 4: ruclips.net/video/4jP68jXcOdQ/видео.html Part 5: ruclips.net/video...
Beijer M series IOs Part 3 Allen Bradley CompactLogix PLC with M3708/M3938
Просмотров 5228 дней назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin If this video is helpful, please like, share and subscribe to my channel! Thank you. Part 1: ruclips.net/video/t4oQJg6myZE/видео.html Part 2: ruclips.net/video/TdUJ1LYpraY/видео.html Part 3: ruclips.net/video/yc79fL6ULf0/видео.html Part 4: ruclips.net/video/4jP68jXcOdQ/видео.html Part 5: ruclips.net/video...
Beijer M series IOs Part 4 Allen Bradley CompactLogix PLC with M226F
Просмотров 5328 дней назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin If this video is helpful, please like, share and subscribe to my channel! Thank you. Part 1: ruclips.net/video/t4oQJg6myZE/видео.html Part 2: ruclips.net/video/TdUJ1LYpraY/видео.html Part 3: ruclips.net/video/yc79fL6ULf0/видео.html Part 4: ruclips.net/video/4jP68jXcOdQ/видео.html Part 5: ruclips.net/video...
Generon Standard PSA Basic Controls and HMI Navigation
Просмотров 51Месяц назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin
Beijer M series IOs Part 2 Allen Bradley CompactLogix PLC with M9289/M7001/M2744
Просмотров 72Месяц назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin If this video is helpful, please like, share and subscribe to my channel! Thank you. Part 1: ruclips.net/video/t4oQJg6myZE/видео.html Part 2: ruclips.net/video/TdUJ1LYpraY/видео.html Part 3: ruclips.net/video/yc79fL6ULf0/видео.html Part 4: ruclips.net/video/4jP68jXcOdQ/видео.html Part 5: ruclips.net/video...
MOXA MGATE MB3170 MODBUS RTU/TCP WEB CONSOLE
Просмотров 381Месяц назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin MOXA MGATE MB3170 User: admin Password: moxa Default IP: 192.168.127.254
Beijer M series IOs Part 1 - Network Adapter M9289 Configuration
Просмотров 110Месяц назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin If this video is helpful, please like, share and subscribe to my channel! Thank you. Part 1: ruclips.net/video/t4oQJg6myZE/видео.html Part 2: ruclips.net/video/TdUJ1LYpraY/видео.html Part 3: ruclips.net/video/yc79fL6ULf0/видео.html Part 4: ruclips.net/video/4jP68jXcOdQ/видео.html Part 5: ruclips.net/video...
Allen Bradley 2080-RTD2 Temperature Conversion / How To Get Temperature Readings From Raw Data
Просмотров 131Месяц назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin If this video is helpful, please like, share and subscribe to my channel! Thank you. Allen Bradley 2080-RTD2 User manual- page 14 for wiring and page 26 for Temperature Conversion literature.rockwellautomation.com/idc/groups/literature/documents/um/2080-um004_-en-e.pdf
Raw Range for input signals on 2080-IF4 and 2085-IF4
Просмотров 1522 месяца назад
Join this channel to get access to perks: ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin If this video is helpful, please like, share and subscribe to my channel! Thank you.
IDEC HG2J Remote Access / Web Server
Просмотров 2 тыс.2 месяца назад
If this video is helpful, please like, share and subscribe to my channel! Thank you. Username: User Password: IDEC HMI: HG2J-7UT22TF-B IDEC PLC: FC6A-C24R1CE
Allen Bradley Micro850 2080-L50E-48QBB Ethernet IP/Download/Upload
Просмотров 5564 месяца назад
If this video is helpful, please like, share and subscribe to my channel! Thank you.
Generon Block / Bleed Valves and High/Low Pressure Mode
Просмотров 804 месяца назад
If this video is helpful, please like, share and subscribe to my channel! Thank you.
Generon Triton Cabinet Basic Controls and HMI Screen Navigation
Просмотров 1094 месяца назад
If this video is helpful, please like, share and subscribe to my channel! Thank you.
Allen Bradley 2085-OF4 no output current-how to reset
Просмотров 4254 месяца назад
If this video is helpful, please like, share and subscribe to my channel! Thank you. Problem When there are no output devices connected to 2085-OF4, measuring the output current with a multimeter shows as zero. Cause It is not possible to measure current on an output without any load connected. Solution After load is connected all channels should be reset by providing value 3848 to the tag _IO_...
Intro/Basic Programming on Allen Bradley Micro850 2080-L50E-24QWB Module Status
Просмотров 7715 месяцев назад
Intro/Basic Programming on Allen Bradley Micro850 2080-L50E-24QWB Module Status
MRU SWG100 How to deactivate/activate a sample line
Просмотров 475 месяцев назад
MRU SWG100 How to deactivate/activate a sample line
Connected Components Workbench - How to Convert 2 Words into REAL
Просмотров 2615 месяцев назад
Connected Components Workbench - How to Convert 2 Words into REAL
Allen Bradley PanelView800 HMI Download with USB
Просмотров 1,2 тыс.6 месяцев назад
Allen Bradley PanelView800 HMI Download with USB
Allen Bradley Date and Time Settings UTC
Просмотров 4786 месяцев назад
Allen Bradley Date and Time Settings UTC
Allen Bradley Micro850 Modbus RTU Master RS-485
Просмотров 1,5 тыс.7 месяцев назад
Allen Bradley Micro850 Modbus RTU Master RS-485
Sequential Pressure Control System Lead/Lag1/Lag2 or Lead/Lag/Standby
Просмотров 1587 месяцев назад
Sequential Pressure Control System Lead/Lag1/Lag2 or Lead/Lag/Standby
Allen Bradley FactoryTalk Linx Communications - Updating IP addresses
Просмотров 6507 месяцев назад
Allen Bradley FactoryTalk Linx Communications - Updating IP addresses
Beijer HMI X2 How to Access Service Menu
Просмотров 2 тыс.8 месяцев назад
Beijer HMI X2 How to Access Service Menu
Beijer HMI X2 Basic Programing #03/CompactLogix
Просмотров 8268 месяцев назад
Beijer HMI X2 Basic Programing #03/CompactLogix
Beijer HMI X2 Basic Programing #02/Micro850
Просмотров 2998 месяцев назад
Beijer HMI X2 Basic Programing #02/Micro850
Beijer HMI X2 Basic Programing #01/Micrologix 1400
Просмотров 5508 месяцев назад
Beijer HMI X2 Basic Programing #01/Micrologix 1400
Allen Bradley Micrologix 1200 PLC Serial Comm. with Panelview Plus 600 HMI DH-485 Setup 616 612
Просмотров 1 тыс.11 месяцев назад
Allen Bradley Micrologix 1200 PLC Serial Comm. with Panelview Plus 600 HMI DH-485 Setup 616 612
Allen Bradley Micrologix 1200 Default Comm DF1 Upload
Просмотров 2 тыс.11 месяцев назад
Allen Bradley Micrologix 1200 Default Comm DF1 Upload
Where in Rockwell did you get thta tool/..because the dropbox link does not function and Rockwell cant help me even after I sent them the video?
@dmitriymartynov3965: I got the instruction pdf and the sample excel file probably from Rockwell Knowledge base center. Anyways it is just the instruction. I should have gone over the instruction in the video. However, if you just follow my video, you should be able to export the current Alarm configuration, modify it and import it back into the HMI application.
hello, my password (desktop access password) only works to turn off Runtime, but not anymore in Win10, I can't start the services, Update FW... I'm trying because the panel communicates with us via ethernet IP
@tomasj.2651: Thank you for your comment. Unfortunately, you have lost the most crucial password which is "Administration password". If you have it, you will be able to do everything on the Windows desktop of the HMI. What you have right now is only the "Desktop access password". To reset the "Administration password", you will need to "factory default" the HMI. On the back of your HMI, there should be a small button inside a round little hole. After you can locate that little hole, use the paper clip to push that little button while the HMI is powered up. Once it is pushed and released, the HMI will go to the maintenance screen. The "factory default" selection should be the second one from top on that screen. Good luck.
Thank you for making this video.Can you please make a video how you have connected your Laptop to with VNC viewer to Beijer HMI
@nkt20880: Are you Generon customer? Does you laptop have VNC software? It is free. You should download and install it to your computer first. It will be my next video as soon as my schedule allows. Thank you for subscribing to my channel.
I have a question on the Micro850 plc. Can it store a value like the number of starts of a motor and retain the value even if the plc is disconnected from power?
@joramgichane: Yes, all tags in Micro850 retain the values after the PLC is powered down. Unlike Micro810 and Micro820 PLC's, you do not need to specify which tag will retain its value. Thank you for your comment but you should leave it in the video about the Micro850 PLC's instead of this video about Beijer IO :)
As always high quality videos on plc
@quoit99training83: Thanks a ton for following my channel.
👍👍👍👍👍👍
@nomandanish441: Thank you for your support to my channel.
Do I need two fiber optic cables to connect between modules? Will one cable work?
@Bentimmy4: Yes, you do need 2 cables. It still works with one but you will no longer have the redundancy if that only cable fails.
How do I install driver for USB? Many thanks
@MrSon0919: It does it automatically as soon as you plug it into your computer for the first time.
Thank u sir .very helpful
@suryarajendran5144: Most welcome.
Hi man. I got error mecompcrc.exe after have firmware update. Can I use this factory reset to fix issues?
@bryanfrancisco-t7x: Firmware update usually factory reset your HMI already. You might got an error from the interruption during the firmware upgrade process. I don't think it will solve your problem but you can give it a try.
@@SYPHOANG if factory reset will not work. Then the HMI will be useless now 🥲?? Are there any options to fix?
@bryanfrancisco-t7x: Have you tried factory reset? Unfortunately, if it does not work, you might have to send it back to the factory to repair it. It happened to me once when I updated the firmware. I am not sure what triggered the interruption during the process, but there was no way to clear it out. I called in Rockwell tech support, they gave me the case number and advised me to send it back to our local distributor (where we bought it from) for a repair.
sir, could you give link from software AB SLC 5/02 . we want to download the program
@Anandya.Javier.setyawan: The programming software "Panel Builder 32" is very old. You can try the link below from Allen Bradley website. compatibility.rockwellautomation.com/Pages/MultiProductSelector.aspx?crumb=111 Search for "PanelBuilder 32". There are 2 available versions 3.83.00 and 3.83.01. You might need to buy the activation for it. Good luck
sir, we have problem with cpu slc 500 slc/02 alarm cpu fault when rebooting ( reset the power supply ). what the real cause and how to solve it
@Anandya.Javier.setyawan: You can check "BATT" for battery and "FLT" for Fault on the PLC. There are a lot of possible causes. But normally it is either from a dead battery installed in the PLC OR a purge surge at the plant. To protect the equipment under its control, the PLC just automatically wipe out its program and kill all outputs. This is what I have seen in most cases.
Thank you for sharing!
@youssefrezk6782: My pleasure!
Helpful
@ashutoshchandra8237: Glad it helped.
Thank you!
@leonpagliari7352: Happy to help. Thank you for subscribing to my channel.
Running into an issue, I can copy .mer file to HMI but won’t load, says unable to load, idea??
@LastMooseStanding: It might be from the HMI firmware or the resolution or the version of the HMI (Standard or Performance).
Will this let the panelview 800 hmi communicate with control logix plc?
@ricamonta899: I have not tried it but I think it should be able to.
@@SYPHOANG ill give it a shot, I know I might have to do some logic on the controller side.
em khởi động lại và ấn giữ vào màn hình mà ko vào đc trang tool như anh ạ, có phải cắm dây mạng vào không anh
@rangeralone6181: Tôi cũng mắc lỗi tương tự ngay lần thử đầu tiên. Bạn chỉ cần nhấn mạnh hơn một chút và giữ lâu hơn một chút.
anh ơi ! cho em hỏi xíu ạ, em có cái màn hình X2 Pro 15 , nhưng em muốn vào kiểm tra IP vs xem có những file ảnh nào để load thì làm sao ạ, cái hiên jtaij của em không có chương trình trong màn hình , chỉ có ảnh , nhưng khong hiểu sao em khởi động lại trên HMI mất 1 Line không hiên thị ạ
@rangeralone6181: Unfortunately I have not experienced it before.
Thanks ,my friend good VDO then can helping me for setting.
@tanachaiphoset3451: Happy to help. Thank you for subscribing to my channel.
thank you sir
@ibrado900: Thank you for subscribing to my channel.
Hi why some only trigger and stop in row 1k or sometimes in 2k ?
@ansonkiek6471: 1k, 2k ? Would you please explain it a bit more?
@@SYPHOANG my data write until 2k then stopped for example file created on 7/31 , I see only store until 2/9 and stopped working
@ansonkiek6471: I still don't understand what do you mean for 2k? is 2k a year? is 7/31 a date? do you have data logged into an SD card? or the HMI internal memory? if it's logged into the HMI internal memory, it might be full and stop logging.
@@SYPHOANG 2k is data store in CSV row , and I use usb store my CSV data I see my CSV file in pen drive created in 7/31 and CSV last recorded only until2/9 how possible stop due to hmi internal memory full ?
@ansonkiek6471: I guess 7/31 is July 31st and 2/9 is February 9th? You might need to check your "trigger" tag.
Thank you 🙏 for great plc videos
@quoit99training83: Thank you for your comment and your support to my channel.
Em có làm đến đoạn Discover thì upload success nhưng không thấy PanelView 800 được upload vào project ạ.
@luctranvan4273: Cảm ơn bình luận của bạn. Vui lòng xem video bên dưới để biết hướng dẫn mở .cha file đã tải trên Connected Component Workbench. Nếu nó hữu ích và bạn thích nội dung kênh của tôi thì một "super thanks" sẽ là cách tuyệt vời thể hiện sự ủng hộ của bạn đối với kênh của tôi. ruclips.net/video/GV9Sp88gPK4/видео.html
Exactly my problem. brilliant, easey to follow .System now running. Thanks for the Help
@kenneym2003: Glad it helped!
This will help me in todays project. Thanks
@bryanfrancisco-t7x: Happy to help!
Can use a DNS in this Allen Bradley PLC to acces fron the Outsite of the local network?
@GeekendZone: Thanks for your comments but I am not familiar with DNS, never tried it before.
Hi anh, anh có thể cho em hỏi là dòng PM5300 cụ thể là PM5320 có hỗ trợ Ethernet Modbus TCP/IP nhưng khi em thử kết nối với modscan thì nó báo lỗi "Modbus Exception...". Anh có từng gặp lỗi này chưa ạ :3
@ghuy6073: Thanks for your comment. I think it should come with Modbus TCP. There are a few things you might want to check. First, make sure you have the right register mapping. Second, slave ID might matter. Make sure you call out the correct slave ID on your master device. Third, be specific on the register length or count. Do not set the length too long or pick up too many registers. If the registers are not available at the device and you are trying to pick them, it might give you errors too. Good luck!!!
your english very good. wait for more clip about rockwell
@PLC-79:Thank you for your kind words and your support to my channel.
Thank you, a great video! But I have a question: After recording data on the SD card, can I remotely access it through Ethernet ( I am using Compact Logix L27erm)?
@plc24_max10: Unfortunately, I don't think it is possible.
How can I export the alarms/events by Active control X to a USB flash drive?
@carolinadiaz0126: What you need is "Audit Trail" and "CSV Export". ruclips.net/video/2DlhiMlh5Vw/видео.htmlsi=ztyJBiZ4N5aUBfxi ruclips.net/video/qYatbwnTDzE/видео.htmlsi=0b6gVPKDGYbyVgJs If you like the content of my videos, a "super thanks" at the lower right should be a great way to show your support to my channel. Thank you.
soundtrack is annoying and obnoxious
@kurtklingbeil6900:.
dear, i have download ME TRANSFER UTILITY. but now need sourch file. please you help me???
@mdlutforrahman4544: Are you trying to modify the existing HMI application (.mer file) on the HMI? ME TRANSFER UTILITY is a tool for you to download/upload an HMI runtime/application to/from an HMI from/to your computer. An .mer file is for an actual HMI only. If you need to work on it. You will need 2 more pieces of software. "FactoryTalk View ME Application Manager" to "restore runtime application" and "FactoryTalk View Studio ME" to work on the restored HMI application.
TANKS you save me
@PauloFonseca-z5s: Glad it was helpful.
In what type i have to format my usb stick to make it work with a Panel view Plus 7 ? And is the path always the same ? Thank you !
@elianousdu30: USB sticks should be formatted to FAT32. The path is always the same. Thank you for your comment.
@@SYPHOANG Thank you very much !
Hi.. I successfully ping the device but rslinx cannot found the device.. rslinx also not browsing at all. Want to know why and how to solve it. Thank you
@sakurag55: Thank you for subscribing to my channel. Is your device from Allen Bradley? Sometimes you might have to remove the driver and re-configure it again. If you want to do it automatically, you should select "Ethernet/IP driver" under "Available driver types". After clicking "add new", make sure you select the driver that has your computer IP address on the same network with the device that you want to see in "Rslinx". Hopefully this helps.
HMI iidec emergency error appears Please help 🙏
@dewalaknat8732: what message you got on the HMI? what is the error code?
nice
@abrarahmednabil1283: Thanks for your support to my channel.
Can you explain why only port 1 of MB3280 will work in this case? Is it possible to read modbus data from both ports simultaneously.
@zainshafiq1923: I have not tried the other port but I believe it's very possible. you can use it as a different serial communication interface to talk to the same slave/server device. If I have some free time, I willing definitely test it out for you.
Hello.how too link.Compactlogic Allen Bradley PLC to hmi panelveiw 800?
@dychristerchrister6477: You might want to check out the video below. If it’s helpful, please do not forget a “super thanks” to show your support to my channel. ruclips.net/video/ysbKEqPR_QI/видео.htmlsi=hItfJvWy4U3ptOfO
help full.
@abrarahmednabil1283: ???
❤❤❤
@AbdullahAhmed-vj2vi: Thank you for your support to my channel.
@@SYPHOANG you deserve more than like 👍..
@AbdullahAhmed-vj2vi: Thank you for your kind words. If you want and you feel comfortable, you can give me a "super thanks" at the lower left corner. Thank you :)
Una ayuda, es que el plc el led dcom se mantiene encendido, pero el chanel 0 esta configurado diferente, que puedo hacer para que el dcom se apague y se reestablezca la comunicación, se mantienen las salidas encendidas pero no hay funcionamiento de las entradas digitales
@maicolherrera7685: "DCOM" means DEFAULT COM. Default Com is DF1. Once you change the Communication Protocol to anything but DF1, the DF1 light will be turned OFF. But what should be the communication protocol for the channel is the question for you. You can look into the other device that your PLC is connected to and find out what communication protocol and configuration it is looking for from your PLC. Hope that helps. Good luck
@@SYPHOANG cuando hago la descarga con la modificación del Chanel 0, el PLC me impide conectarme otra vez y por eso no me deja ponerle run
@maicolherrera7685: It's very simple. You pressed the button on the PLC to set the default DF1 to Channel 0, the DCOM turned ON. However channel 0 in the program you downloaded to the PLC is configured for DH485 or anything but DF1. My guess is DCOM light turned OFF after you downloaded the program to the PLC because channel 0 is now no longer set for the default DF1. You can no longer connect to the PLC because of the cable between your PLC and your computer. My guess is the cable you use is for DF1 communication protocol, it is not for the communication protocol for channel 0 in the program you downloaded to the PLC. I think that was also the reason you set the default DF1 to channel 0 on the PLC. If I was you, I would never reset channel 0 on the PLC back to DF1. My recommendation is to always find the right cable that works for the communication protocol configure in the PLC program before any downloads. Please consider joining my channel for more support. ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin
This worked! Thank you very much!
@vleiswalker9374: Glad it was helpful.
una pregunta si yo presione el boton com del plc, y se cambio al chanel 0 que puedo para reestablecer el canal que tenia con el scaada al que le esta enviando los datos
@user-fb9rd2dl4l: Unfortunately I don't think that would be possible. However you can look into your scada system to find out what communication protocol and configuration it is looking for from the micrologix1200 PLC. Then you can set it up again in the PLC logic. Good luck.
@@SYPHOANG muchas gracias, asi lo hare es que eso es lo curioso cuando por defecto la comunicacion al presionar el boton com, se visualizan unos datos en el scada, y al apagar el plc, se dejan de ver esos datos
I cannot reach out your documents in dropbox.
@khachapatrachatamethin7484: which document in my dropbox are you trying to download? The full links might be available for channel members only.
@khachapatrachatamethin7484: Are you Samroeng Kanathong who is trying to download the function block "Lead_Lag_STBY_BLK.7z"? If you can confirm it is you and that is what you need, I can share you this file only as an exception for a potential channel member. All function blocks are for channel members only. Please consider joining my channel for more support. ruclips.net/channel/UCyyYzqg0sp_W7CW9ScZh-zAjoin
@@SYPHOANG thank you so much. I can reach out to your document right now. I wonder how to convert XML file back to Excel file. Could you please help?
@khachapatrachatamethin7484: Are you trying to download the function block "Lead _Lag_STBY_BLK.7z" and import it into your PLC project in Connected Components Workbench? If so, you need to download and import the file with ".7z" extension into your PLC project. No need to worry about other files.
@@SYPHOANG nope.
Great video !
@punishedgoy9131: Thank you for your support to my channel.
謝謝!
If we check the Expanded box at 1:06, how much can it expand? Isn't the maximum length of N File only 255?
@yijunhuang1005: Thank you for your support to my channel. Yes, it might be 255 max.
Good Video, Very Helpful~
@yijunhuang1005: Glad it was helpful!
Oh when i restored it and edit a lots , then How I can change it to an.mer file to download to the hmi
@T---dq2qv: In the "FactoryTalk View Studio", at the very top, select " Application", then click on "Create Runtime Application". Be careful to pick up the right version for the .mer file you want to create at " Save as type"? Make sure its version is lower than your HMI firmware. Good luck.