MAKING 10 LINEAR BEARING BLOCKS FOR ONLY $100!!! | DIY CNC | Part 1
HTML-код
- Опубликовано: 11 сен 2024
- Making linear bearing blocks for my CNC project. If you have any questions leave a comment below and I will try to answer.
The second part comes on Wednesday! To see it, press the subscribe button and notification bell. See you soon!
Igus material: www.igus.eu/pr...
Glue: www.permabond....
Follow me on Social Media for more content:
IG: @surgecreator
Use ptfe(teflon), i think it need screw for tensioning as bearing need preload.
Add a couple of screws either end of the blocks to hold the plastic incase they come loose :) , also the rails you bought are imperial sizing, 15.875mm is 5/8" , so had you bought 5/8" bearing blocks they would have worked, although still expensive and if none adjustable you have to pray to the gods they are not branded cheap chinese
We used Igus linear sliders in our products, they have a tendency to become loose, unlike the traditional ball type ones
Awesome! Can't wait to see the mill.