How to check IR value of LT cable by megger. LT cable Megger value

The measurement of insulation resistance is a common routine test performed on all types of electrical wires and cables. As a production test, this test is often used as a customer acceptance test, with minimum insulation resistance per unit length often specified by the customer. The results obtained from IR Test are not intended to be useful in finding localized defects in the insulation as in a true HIPOT test, but rather give information on the quality of the bulk material used as the insulation.
Even when not required by the end customer, many wire and cable manufacturers use the insulation resistance test to track their insulation manufacturing processes, and spot developing problems before process variables drift outside of allowed limits.
Selection of IR Testers (Megger):-
Insulation testers with test voltage of 500, 1000, 2500 and 5000 V are available.
The recommended ratings of the insulation testers are given below:
Voltage LevelIR Tester650V500V DC1.1KV1KV DC3.3KV2.5KV DC6.6Kv and Above5KV DC
Test Voltage for Meggering:-
When AC Voltage is used, The Rule of Thumb is Test Voltage (A.C) = (2X Name Plate Voltage) +1000.
When DC Voltage is used (Most used in All Megger), Test Voltage (D.C) = (2X Name Plate Voltage).

[@ElectInstruGuru]

Very valuable video for Megger and IR value of LT cable

[@kaushalendrasingh344]

Very good 👍

[@DanishKhan-mw1iw]

Good

[@mohdjahangeer1350]

Thank you for sharing Valable Massage sir

[@mahmoodmirza3301]

اچھا ویلاگ رھا۔

[@abidali.6873]

Good 👍

[@funtech3792]

Great work bro

[@veerkumar3452]

Hi sir same cable ki minimum ir value kitni honi chahiye jisko load ke sath panel per connect kiya ja sake please explain

[@gautammakal4895]

Continuity aur IR test to ek hi ho gaya na?? Ek damage wala cable le kr bhi aap kr sakte the na??

[@kurbanali616]

Thnk you

[@dhananjaisir9579]

300 mm² to 1000mm² , how to magger a cable ...
how to set voltage setting
Ac V 5000 are DC V 500 ....?

[@awnishpaswan5323]

Test karne ke cable discharge bhi Kara jata hai

[@Mohammad12190]

Thankyou

[@rameshande300]

What base voltages to be applied for cables is there any formula

[@raytech6049]

We do service all these devices in Kolkata with best possible quality.
Emco Instruments.

[@kaushalendrasingh344]

Short kar ke bhi show kigiyega

[@nm_arts5868]

Dusre end ko short karke bhi to karte hai to test if any core is not broken from inside

[@ElectInstruGuru]

Yes you are absolutely right

[@eswaranalagarsamy1371]

How many Rate?

[@aslamalikhan1124]

After testing has to be discharge

[@NirajSingh-xb6mj]

Sir kitne volt pe check kiye the ye to aapne bataya hi nahi

[@kanhaiyalaljoshi9125]

Sir motor mega car video

[@StarBoySudhirSinghKushwah]

Pvc ka nyuntam I r kitna hona chahiye

[@nathanvallee2142]

Why do Hindi speaking people always use English titles. STOP!!! so annoying!!!

[@alamtechnical6074]

Kaha bra rha hai reading

[@manowarhossain8742]

This is not megar, it was only continutey..maybe you not understand ir test

[@ElectInstruGuru]

See full video first

[@manojlamichaur1875]

Bahut kharab hame kese pata chalega ki kharab hai

[@shekhsaddam1826]

Bhai sahi se check kro ye wrong tarika hai bilkul

[@masihullahkhan6473]

Power kaon degas bakwas