Loop function does not create 10 clicks for every one tap (I wish). It simply specifies the number of cycles the scanner will highlight all of the clickable buttons on the screen before turning off. The reason it typed after you lifted your fingers is because you spammed the screen with your taps faster than the time it took the switch recipe to execute. It stopped after the queued activations ran out.
hi, is there any way to make it so the recipe keeps going on its own without me having to touch the screen all the time. In other words that it keeps tapping automatically?
@@tristanlagies926 No. best you can do is as I mentioned before. However, here are some tips: 1) make use of the full 60 second window for recording your recipe if possible as this will keep your loops going longer with less tapping. 2) if your recipe loop is 5 taps or less, perform two iterations in one recording. 3) drum on the screen with your fingers (like if you were nervously tapping an armchair or something) to get up to an hour of loops in 10 seconds of tapping (assuming your recipe is 60s long). Hope this helps
@@ianvanessen9356 yes bro thank you so much for responding, but idk how to do it for the recipe to be 60 seconds long, how do i do that? And another question, if i figure out how to do it 60 seconds long this means that with 100 seconds of rapidly tapping the screen the loop will keep going for 10 hours?
Follow the instructions in the video. When you get to the recording screen you will see a blue line on the bottom which runs out in 60 seconds. If you can, time your last tap so that it is right before this timer runs out. Yes, theoretically, if you tap 6 times per second, you’ll get 10 hours in 100 seconds. But I find this almost never works because of wifi hiccups or chocked speeds due to high traffic times of day.
@@ianvanessen9356 Thank you for your help bro. i don't think i understand because i follow the video and when i get to where u said the blue bar runs out in like less than 10 seconds unless you meant that the time it takes to run out represent 60 seconds. But the thing is that it won't let me tap the screen more than like 7 times so it would be too slow either way if it was only 7 taps per 60 seconds. What i understood with your first response was that when i get to do the custom gesture i should tap the screen for 60 seconds and then save that recipe. But i don't thing you can do that. ( I know im confused, feel free to not respond if you want )
Also FYI, with IOS 15, recipe limits have been increased. Before you were allowed 5 interactions with an 8 second time limit. Now you get up to 10 interactions (taps) with a 60 second time limit!
@@juan1256roblox that would be awesome. But also a nightmare for resuming control over your device. Also keep in mind Apple did not necessarily have gaming in mind with this feature. It’s more meant to tether wheelchair controls to iPhones and other accessibility scenarios
if u are having issues activating it what u have to do is make a different recipe/switch to make it click on ok then after that it will not ask the thing again
Thank you for telling me I wanted auto clicker because all my friends bragged that they had auto clicker on there PLC and I didn’t AND NOW I FINALLY HAVE IT thank you!
Thank you so much I have been trying to find an auto clicker on iPad and there was nothing in the App Store then I found something on reddit about switch control but I didn’t understand how it worked but thanks to you I now do
theres a pop up letting me know that im about to lose control of my phone created by apple, and it prevents the clicker from clicking what I want, any advice on how to take that off?
Hey, can I ask you? When I do Autoclicker, I want to repeat the presses without touching, but I cannot, so I have to press more than once to move plz help me
I Suffered so you don’t have to, if you have no idea how to still do it, this is how u do it. 1) Go to Settings 2) Click Accessibility 3) Click Switch Control 4) Click Switches 5) Click Add New Switch 6) Click Default And set to Tap 7) Return to Switch Control 8) Click Receipts 9) Click Create new receipts 10) Click Assign a Switch 11) Click whatever name you called the new switch from step 5 12) Click Custom Gesture and then make it 13) Return to Switch Control 14) Click Loops and set to 10 15) Return to Switch Control 16) Return to Accessibility 17) Scroll to the bottom and click Accessibility shortcuts 18) click Switch Control 19) Go to whatever game you were using it for and click on the power button 3 times or home button(if you have one) and tap once. And you’re done.
@@Hkharoon1 Did u do step 17-19, which is clicking Accessibility shortcuts, selecting the Switch Control, then clicking the power button or home button 3 times
So I have the autoclicker, but whenever I try to use it, a warning screen pops up telling me that this will change the way my phone works. And whenever I try to press I understand the autoclicker starts and it won’t let me close the warning screen. Is anyone else having that problem?
bro when i click the home button this message appears on the screen what should i do?IMPORTANT The "control switches" option changes the gestures used to control iphone. Do you want to continue? press the home button to cancel. THIS IS WHAT EXIT :(((((((((
I followed all the instructions and when i go into my game, I triple tap home screen, tap the screen and the auto clicking starts the tapping. But it only lasts for 10 seconds then stops and never taps again. What am doing wrong?
Hi I have a problem with the important message thing where I can't tap cancel or ok but somehow I got rid of it but now when I put on a recipe to auto click it won't work and I do it correctly but still it won't work I can't see the gray dots doing anything like tapping so I decided to try it in a game and nothing it doesn't tap I've actually created 20 different recipes with different tutorials in the past 3 or 4 hours I am about to lose my mind I'm so fustrated,please help meeee!!!!!!!!!!!!!!!!!!!!
Why do all these youtube videos claim this is some sort of auto-clicking functionality? You cannot use this as an autoclicker so everyone should just not waste their time watching this video (or any of the videos like it). There is no autoclicker available on iOS that lets you click inside apps (there are some for clicking on web pages).
But if i activate it it say: Important: this could change the gestures used to control your ipad. And i cant click anything like i cant cancel/accept could u maybe help me out?
Loop function does not create 10 clicks for every one tap (I wish). It simply specifies the number of cycles the scanner will highlight all of the clickable buttons on the screen before turning off.
The reason it typed after you lifted your fingers is because you spammed the screen with your taps faster than the time it took the switch recipe to execute. It stopped after the queued activations ran out.
hi, is there any way to make it so the recipe keeps going on its own without me having to touch the screen all the time. In other words that it keeps tapping automatically?
@@tristanlagies926 No. best you can do is as I mentioned before. However, here are some tips: 1) make use of the full 60 second window for recording your recipe if possible as this will keep your loops going longer with less tapping. 2) if your recipe loop is 5 taps or less, perform two iterations in one recording. 3) drum on the screen with your fingers (like if you were nervously tapping an armchair or something) to get up to an hour of loops in 10 seconds of tapping (assuming your recipe is 60s long). Hope this helps
@@ianvanessen9356 yes bro thank you so much for responding, but idk how to do it for the recipe to be 60 seconds long, how do i do that?
And another question, if i figure out how to do it 60 seconds long this means that with 100 seconds of rapidly tapping the screen the loop will keep going for 10 hours?
Follow the instructions in the video. When you get to the recording screen you will see a blue line on the bottom which runs out in 60 seconds. If you can, time your last tap so that it is right before this timer runs out.
Yes, theoretically, if you tap 6 times per second, you’ll get 10 hours in 100 seconds. But I find this almost never works because of wifi hiccups or chocked speeds due to high traffic times of day.
@@ianvanessen9356 Thank you for your help bro. i don't think i understand because i follow the video and when i get to where u said the blue bar runs out in like less than 10 seconds unless you meant that the time it takes to run out represent 60 seconds. But the thing is that it won't let me tap the screen more than like 7 times so it would be too slow either way if it was only 7 taps per 60 seconds. What i understood with your first response was that when i get to do the custom gesture i should tap the screen for 60 seconds and then save that recipe. But i don't thing you can do that. ( I know im confused, feel free to not respond if you want )
Also FYI, with IOS 15, recipe limits have been increased. Before you were allowed 5 interactions with an 8 second time limit. Now you get up to 10 interactions (taps) with a 60 second time limit!
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
Why is that 10 taps!?! I WANT TO SEE 25 TAPS OR MORE!!
@@juan1256roblox that would be awesome. But also a nightmare for resuming control over your device. Also keep in mind Apple did not necessarily have gaming in mind with this feature. It’s more meant to tether wheelchair controls to iPhones and other accessibility scenarios
Grandma do be hacking (background xD)
LOLOLOL
maybe using python scipter then accessed the mainfraim into the system
XDDDDP
Coding?
if u are having issues activating it what u have to do is make a different recipe/switch to make it click on ok then after that it will not ask the thing again
Make an updated version because it is a bit different on settings now
Thank you for telling me I wanted auto clicker because all my friends bragged that they had auto clicker on there PLC and I didn’t AND NOW I FINALLY HAVE IT thank you!
Same
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
You can do assitivetouch from accessibility and you can do custom and do hold and drag and do it on a cursor or a jump button
How do you make it continuously do it without tapping it 100 billion times or is that impossible?
Thank you so much I have been trying to find an auto clicker on iPad and there was nothing in the App Store then I found something on reddit about switch control but I didn’t understand how it worked but thanks to you I now do
yyy
How did u do it with the pop up
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
Hey thanks for the video :)
Hi, I have a question. I need the auto clicker to double tap every 30 or so second throughout the night. Is this possible with this and how?
Idk
Any idea how to stop it when its activate?
theres a pop up letting me know that im about to lose control of my phone created by apple, and it prevents the clicker from clicking what I want, any advice on how to take that off?
U just click on the close phone 3 times fast
@@Brotherzlox-ln2fp yeah I did that but when I turned it back on it still said it
?
U can try it again
If you have no button that opens click exit button 3 times fast
Thxs so much
i dont think Loops works like that, its just because each press queues another set of clicks that you made in the gesture
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
I did it but the text isnt going away on the top do you have any idea on how to get it out
OMGGGG THX SOOO MYCH REALLY HELP
Hey, can I ask you? When I do Autoclicker, I want to repeat the presses without touching, but I cannot, so I have to press more than once to move plz help me
Same
same
Same lol
Same
Same
your soothing bro
I dotn hjave the option to loop it ten times? its just not an option, is it an Ipda exclusive thing? im on iphone
Thank u
YESS IT WORKEDD TYSMMM
When I click power button it closes my ipad
Can u pls explain me hot to set one touch every 10 minutes?
BRUH WHEN I PRESS THE POWER BUTTON MY UPAD TURNS OFF BRUHH
i clicked home button 3 times but it turned off my ipad
Ty
Thanks so much now I can play roblox with a semi autoclicker
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
How do I stop it while it’s going tho? Because I almost broke my ipad
You have to wait until it ends so dont click too much its risky
My iPad closes when I tap the power button 😢
HOW I SUPPOSED TO HAVE ASSIGN A SWITCH PLEASE TELL ME
Finally a auto clicker video that I can do
Subbed
When I try clicking my power button it doesn’t work cus it keeps turning off and I’m not fast enough
Z can u make a vidieo showing how u can confirm it pls 😭😭
For me it showed a notification when I activated it and when I try to press of it doesn’t work:(
Me to
Me too I'm so fustrated because of it
Thanks
You have a nice voice!! Very soothing
ey thank you!!
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
@@zonrealshit8140 when I go over to the switch control on screen full screen it doesn’t let me put full screen it’s like a locked ):
I Suffered so you don’t have to, if you have no idea how to still do it, this is how u do it.
1) Go to Settings
2) Click Accessibility
3) Click Switch Control
4) Click Switches
5) Click Add New Switch
6) Click Default And set to Tap
7) Return to Switch Control
8) Click Receipts
9) Click Create new receipts
10) Click Assign a Switch
11) Click whatever name you called the new switch from step 5
12) Click Custom Gesture and then make it
13) Return to Switch Control
14) Click Loops and set to 10
15) Return to Switch Control
16) Return to Accessibility
17) Scroll to the bottom and click Accessibility shortcuts
18) click Switch Control
19) Go to whatever game you were using it for and click on the power button 3 times or home button(if you have one) and tap once.
And you’re done.
Do you know how to confirm it
When I click don’t work
@@Hkharoon1 Did u do step 17-19, which is clicking Accessibility shortcuts, selecting the Switch Control, then clicking the power button or home button 3 times
@@Hkharoon1 There's no confirmation, once you select it, the option is already enabled.
How do you make it loop overnight
How do I do it if I don’t have the side button
I did it exactly how you did but it keeps telling me invalid configuration and it doesn’t work,what the hell do I do??!
Help I can’t turn it on I’m in phone how to tap power button without turning off phone
Thanks for The Tutorial!
Warning this disabled my phone to Siri only mode but I don’t know if this works for you
Thxxxxxx::))))
How to I get rid of important button because every time I try click ok it doesn’t work
Same
I triple clicked the home button and nothing happened
the activation on mobile home button didnt turn on the auto clicker when i tapped it 3 times faster than usain bolt
My switch control is greyed out
So I have the autoclicker, but whenever I try to use it, a warning screen pops up telling me that this will change the way my phone works. And whenever I try to press I understand the autoclicker starts and it won’t let me close the warning screen. Is anyone else having that problem?
Yea
And if the auto clicker is clicking on a app or somthing it’s not opening it
How can ı make auto clicker endless repeat a click ?
got autoclicker but tablet stop working because of triple click side button
How to make it work
bro when i click the home button this message appears on the screen what should i do?IMPORTANT The "control switches" option changes the gestures used to control iphone. Do you want to continue? press the home button to cancel. THIS IS WHAT EXIT :(((((((((
I’ve got the same problem
guys pls make her more sub plssss
I don’t have home button
How did u get ur keyboard
Tap to the screen?
I followed all the instructions and when i go into my game, I triple tap home screen, tap the screen and the auto clicking starts the tapping. But it only lasts for 10 seconds then stops and never taps again. What am doing wrong?
Same…
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
yes he does have one but it has the
But if I press the power button 3 times and it just turns it off
Make sure you put on the clicker
Wow ur iPad doesn’t have a home button like me
Yea but i can’t press ok
But I don’t have the switches thingy
But how can we put the autoclicker exactly where we want it?
It’s work for me but if my auto clicker click on somthing it does nothing, how ? Can someone help me ?
I dont need autoclicker my finger is faster then a autoclicker😂😂😂
How do u stop it?
Am on I
Ad Appel I think and I can’t see that app on there ..
When I press the button 3 times it Jsut turns of
Same
Same
Use the home button
DUDE IM SO LOST
small brain 🧠
How do i stop it while its still going? Do i have to wait it out??
Its been so long its making my phone over heat
PLEAS HELP
@@pyroboi5291 is your phone ok??
It’s gave me a warning I can’t get off it help pls
wait what do we use this for?
idk
When you clicked the power button your iPad didn’t turn off. When I clicked the power button guess what happens, it turned off
Same
Its a different i
Ad
When I click the power button it turns off :)))
Why i can turn on my switch control
it dont stop pls help
I’m just here so I can use an Autoclicker on Roblox lol, but thanks!
Omg same
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
@@lvlymisty2402 Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
I GET THE FEELING WHATEVER HAPPENED AFTER YOU CLICKED POWER WOULD’VE BEEN MORE HELPFUL IF YOU KEPT IT IN THAN EDITING IT OUT
Hi I have a problem with the important message thing where I can't tap cancel or ok but somehow I got rid of it but now when I put on a recipe to auto click it won't work and I do it correctly but still it won't work I can't see the gray dots doing anything like tapping so I decided to try it in a game and nothing it doesn't tap I've actually created 20 different recipes with different tutorials in the past 3 or 4 hours I am about to lose my mind I'm so fustrated,please help meeee!!!!!!!!!!!!!!!!!!!!
how did u get rid of the important message because it won’t let me past that
Problem I’m on iPad Pro and they don’t have button
Can some one help me asp
The loop doesn’t do anything though?
Doesn’t work for me either
What iPad is that?
It turns of my I pad
Why do all these youtube videos claim this is some sort of auto-clicking functionality? You cannot use this as an autoclicker so everyone should just not waste their time watching this video (or any of the videos like it). There is no autoclicker available on iOS that lets you click inside apps (there are some for clicking on web pages).
Well it kinda works if you wind it up for like 15 minutes you can go for like an hour or 2
how to get it, to loop indefinetly until turned off?
I still finding about it
Bro on my one it just canceled the full screen
This didn’t work on my iPod bro
جدا جيد
How do you do it with sound button mine says home button and I have to turn it of them back on when I press three times it doesn’t work
She uses volume button because that iPad doesn’t have a home button
No she uses home button
Like the turn off button
@@notsikeee921 iPad Pro doesn’t have “home button”
@@notsikeee921 If you mean Power Button yes she uses that
The full screen don’t work you sus
But if i activate it it say: Important: this could change the gestures used to control your ipad. And i cant click anything like i cant cancel/accept could u maybe help me out?
same did u fix it
No
My Handy turns off
Anyone knows how to do milliseconds tap please?
did you figure it out?
sorry but I need to say sorry it's not working in my ipad
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
Pls someone help me it is working on me it is clicking but if it clicks on a jump button or somthing nothing happen pls help someone
It tells me to press ok but when i press it shit doesnt work
Me too
Its useless unless u are able to move your screen which is a no no and it doesnt last for to long
Same
i dont have home button and it doesn’t work
2:08
You almost broke my phone