Soil Moisture Sensor with Arduino Uno
HTML-код
- Опубликовано: 25 авг 2024
- In this video we will learn how to use soil moisture sensor with Arduino Uno.This is simple irrigation system when the moisture is low the water pump automatically will turn On and when moisture is certain level or high the water pump will be automatically turn off.
Download the code here;github.com/pas...
Music Credit to;
Song: Fredji - Happy Life (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Fredji - Happy Life (V...
Can you show how to connect the lcd without the 12C Module
Outstanding and interesting video bro
I LOVE UR CODE muah muah
Can we use capacitive instead of this resistance which u have shown in video...
Mean capacitive soil moisture sensor? yes you can use also.
@@passiontechklm ok.. thanku
Hi not working code
Very nice idea i love it
контакты датчика окисляются и перестаёт работать.
Bro idha plants watering pandra maari set pandradhu eppudi bro
Watch this link bro ...ruclips.net/video/7KdhL_gAqHQ/видео.html
mY LDC is not working. Which Library did you use?
i have made the same circuit but lcd gets on but nothing is displayed.. only light is coming...
I have made more details video here, ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=tR170tS8z_b_q8zF
can you show how to connect it to water pump?
ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
All the codes aren't seen well
i make more details video here if you wish watch.
ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=qxJUDWtvF6J4tVxK
Thank you very much but i think you meant analog 4and 5
because for me it worked on analog.
Hey I am trying to do this project but there is an error in the code given did you change it or something???
Can you please share the information
It would be really helpful
Hello there, just change the 2 pins of the lcd and put them to analog4 and 5
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
Hi may i know do you have cooding this project combain with mqtt iot
Bro can you provide me data set of soil moisture capacity 😊
What is that big board🤔
You mean I use as wire connected point?Solderless Bread board,
good job
can i use two channel relay instead of one channel relay????
Yes you can use,you just need to connect to in 1 only no need change the code
thank you
@@passiontechklm
Do you have schematic diagram for this?
@@opallajoshuapith5303
i have made more details video here. ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=qxJUDWtvF6J4tVxK
Where is the battery 🔋
Can we use node instead of an Arduino
Yes you can....but you need to change the pin follow up to Node MCU digital pin
Hi there, it's a good tutorial . Can you share the library you used
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
Can you send me a circuit
Bro from where we can buy this components?can u share the website details
Hi Bro, You can buy in any online shop this items are just common parts.
what library did u use
Which wire is used to put the code in the system
ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
How can i do it without ı2c
Need to edit the code for without i2c lcd
I've got an issue with the LCD screen, in the video you say to connect to the digital pins D4 and D5 but you connect them to the analog pins A4 and A5, while also on the code the pin 2 is set so which is it ?
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
Thank you so much for this tutorial 👍🏽
ruclips.net/video/7KdhL_gAqHQ/видео.html
how to connect water pump to relay please show me 😣🙏
To connect water pump , basically their is two wire for water pump ⛽ one wire is (+) and another one is (-).So just cut off (+) wire and one side connect to Com of relay and than another side of (+) wire connect to No of relay.Thats all bro...try it .but make sure you power off before you cut the wire to avoid any electric short .
What to do with the negative wire of dc water pump
@@samosachattraju7030Water pump negative wire direct connect to power supply or Battery which one you use.
@@passiontechklm there is 2 positive wires??? One to relay com and one to no of relay how is that possible
Yes exactly negative wire direct connect to power supply negative.
Thanks
Can you please state the name of components?
ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
thankyou
You are welcome 🤗
Bro display text not coming pls help
when i am uploading the code it is showing #include LiquidCrystal
no such file or directory
Same, why?
code please?
fix for relay contact chatter? Pump motor probably wont like start/stopping at that pace
ruclips.net/video/7KdhL_gAqHQ/видео.html
How do I get the code
the code is in the description link
There is nothing seem on my lcd
Check LCD display wire connetion and press Arduino reset button should be ok.
I make another video here for more details...ruclips.net/video/7KdhL_gAqHQ/видео.html
@@passiontechklm Thanks it worked
i got an error in coding what i doo
How much time to take code uploading bro
Code uploading should be take only a few seconds,if take so long times means something error.
@@passiontechklm i mentioned the same code only but it giving error
@@passiontechklm the display also working as per diagram we did connections but that code showing error
Can we use Arduino NANO in place of Arduino UNO ??
Yes you can use Nano as well.
DO YOU HAVE THIS PROJECT SIMULATION IN PROTEUS?
i dont have in simulator bro...
Your coding is not working
ruclips.net/video/QIdERbxDVuM/видео.html
I don't have motor
ruclips.net/video/7KdhL_gAqHQ/видео.html
Can you please give the list of components used for this project in detail??
Jumber wire - Male to female, Soil moisture sensor, 5V relay module,Bread board,16*2 12C LCD Display, Arduino board with cable
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
Hello, I made this project as presented, I used the programming as available for download. The system works perfectly, but he does the irrigation and the next day the system crashes and he has to unplug it so he can restart the reading and then make the decision whether to irrigate or not. Does anyone suggest any changes to the code so that the system doesn't crash in the next few days?
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
can i have a source code
Why is my LCD Display not glowing ?
Your code is not working
Your code is not working bro
I have made more details video hereruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=fuMmE9abjHPR-uI1
Haii bro can u share the library…this project is awesome
You can watch this bro ..ruclips.net/video/7KdhL_gAqHQ/видео.html
hello, i made this project also. i used ur vid as a tutorial, the problem is, the pump is not automatically working. The pump is still working even the lcd says the pump is off. i hope u can help me
No
Please shema de câblage
Bahi lcd par kuch nahi a raha
What is called that two nodes of this moisture sensor ??
That is sensor probe to detect the soil
ruclips.net/video/7KdhL_gAqHQ/видео.html
can you share the library?
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
donde encuentro la programacion
Can you share a report of this if you have any ?
what to do when it keep showing 'Liquidcrystal_12C.h: No such file or directory ' when i upload the code?
You need to add the zip file and library file I have shown in this video hereruclips.net/video/7KdhL_gAqHQ/видео.html
Hey there! Excellent work here. By the way, can you show me how to connect 12V dc water pump to the relay??
Hi...if you use water pump practically you just cut off the positive wire of the pump and one side connect to COM of Relay and the other side connect to NO of Relay that it done.
Relay is perform as switch only.I suggest you use DC water pump.
@@passiontechklm may i email you my circuit and listen to your comments as well?
Also does it have any changes to the coding you have given if 12V dc water pump is added??
@@muhammadsyauqiridwan8551 You dont have to change anything on code.
Bro components list
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
Will u Pls share other project details??
ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
Automatic waste segregation system
Bhai diagram Nehi hey???
it does not show anything in the lcd
did you scan your i2c lcd address?
@@passiontechklm how do we do that?
@@Aether-dt8je check out this video for more details... ruclips.net/video/7KdhL_gAqHQ/видео.html
Hello
Is there is a flow chart for it?
salam
how I can download model of that project
please kindly
Bro ur codeing is not working 😫
what is not working bro....can you done upload ing
Relay IN connect to D2 of Arduino Uno
Helo can I do this project in my college is it working perfectly please tell me
Your coding is not working y
Yes
ruclips.net/video/QIdERbxDVuM/видео.html
its should work bro , did you modify the code?
Circuit diagram bro
Which arduino Uno is this?
hi there is it possible for you to share the link for the code library you used?
ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
After connecting with motor , it's not working properly why
Ilike it
Hiiii
What will be the problem statement for this ?
I wanna see an actual pump 😂. I need this to work for me !*. Lol
Pls reply
How can I buy this project ?
Sir Arduino NANO ma to D1 pin nahi likha hai kya karu ???
please the schemas of this projet in proteus
sj
Show how to connect to a water pump
💀💀
I have made more details video here ruclips.net/video/7KdhL_gAqHQ/видео.htmlsi=7ulVPlTilNpXJ2f5
Your coding is not working