How to Install - Next-Gen Ford RAPTOR 32inch Stealth Light Bar | Behind the Grill Kit
HTML-код
- Опубликовано: 28 сен 2024
- Our 32" Double Row Stealth LED Light bar kits are the largest behind the grill kit you can get for the new Next-Gen Ford Ranger Raptor (2022 Onwards).
Giving you almost 4 times the amount of light output over the factory headlights, our 32" Double Row Hybrid Light Bars install seamlessly behind the grill using our bespoke Altiq Brackets. That means no cutting or modifications are required, the kit is installed using the existing factory bolts.
In this video we go through a step-by step guide of how you can install our Next-Gen Stealth Light Bar Kit, all in under 10 minutes!
*Fits Next-Gen Ford Ranger Raptor only
- Next Gen Ford Everast and Ranger Stealth light bar kit coming soon!
Learn More:
altiq.com.au/c...
#lightbars #fordranger #nextgenraptor #raptor #raptorlightbar #stealthlightbar #behindthegrill #ledlightbar #drivinglights #fordraptor
Nice, very OEM, I’d love to see a light bar that replaces the entire Ford loco with a semi curved light
Is there a way to wire this up with an aftermarket aux, like the stedi one?
Probably should not solder in automotive applications due to vibration breakage over the long term. Instead, direct crimp a DT connector on the factory aux wire for proper termination and factory look.
Does it work the trans cooler from pw?
Would like the know the cost. Also I have a Dec 2022 Wildtrak let me know when you get them.
Check the link in the description. $300
Recommendations for setting beam after fitment?
Hey Huskydog78, do you mean adjusting output angle?
Depending how hard you torqued the bolts, you can often get a small amount of tilt through the grille for finer adjustments and the stiction of the bolts will leave it in that position permanently.
This is a highly flood bias light bar, so the adjustment is not micro like our spot lights.
Pro tip: Measure the height of the light bar from the ground
Shine the light to a wall 10 + meters away on level ground.
If the output hot spot height is higher than the light bar, it's angled up, look for a similar height.
-Jake
Is the amperage enough? I understood that those loom leads are to operate the relay and the light bar is connected to the battery via the relay.
He’s done it correct mate, those wires are from the relay which is connected to battery and aux switch, also if you look at your owners manual in the infotainment system it will give you all the info about it like wiring location/colours/ amp ratings and relay locations 👍
Hey
Do you ship to germany
Because in your shop the price are in euro
Glaub nicht , dass es passt . In Europa haben wir die Lamellen vorm Kühler .
Do you ship to Ranger Raptor 2023 in Brazil?
Também estou procurando. Vc conseguiu?
No thanks. Blocks the intercooler which already needs to be replaced as its extremelly undersized stock.
Dude get a Fenix intercooler upgrade
Do you shio in Romania?
Good instructions but takes longer than 10 minutes. Removing the front trim is tricky but once you get the tool in the right place - when ch is not well shown in video - the rest of the process is straight forward.
Love it just. Great product.
Will this work in the 2024 Ranger Raptor in the United States? Do you ship to the US? Will installation be exactly the same?
Hey Joe, we ship to USA and have some details on USA spec'd Rangers. If you could email us sales@altiq.com.au Attention Jake, I would love to chat further with you about this solution and upcoming Ranger Raptor products we're designing.
@@altiqauOMG just say yes or no, does it fit the US spec YES or NO
Do you shio in Romania?