Badger Airbrush Patriot 105 Paint Tips

The 3 different paint tips for the Badger Airbrush Patriot 105
BADGER 105 Patriot Airbrush, Gravity-Feed, Double-Action, 0.5mm tip, DUAL ACTION, INTERNAL MIX, GRAVITY FEED Air valve The Patriot, Model 105, is a comfortable, reliable, cost-effective, user-friendly gravity feed airbrush, designed for use by experienced, as well as novice airbrush enthusiasts. Its two angle needle tip precisely mates with the Patriot’s cone shaped nozzle, enabling a single needle/nozzle configuration to spray a variety of materials, while eliminating the need for multiple needle/nozzle variations. It has a 1/3 ounce permanently mounted colour cup with a convenient spill-proof cap. The Patriot’s body design provides exacting balance and long-term user comfort. The Patriot is a low maintenance airbrush, easy to clean and simple to operate; it will spray any properly reduced paint or airbrush-ready media. Developed to deliver precise performance and fine line detail, the Patriot is an ideal airbrush for custom art, graphic arts and illustrative work. The Patriot airbrush will operate at 30 PSI, as well as lower pressure settings (10-15 PSI) and is ergonomically balanced for hours of comfortable airbrushing. FEATURES • Single needle/nozzle for spraying all mediums including inks, dyes, watercolours, properly reduced acrylics, enamels, lacquers, and airbrush-ready colours • Single needle/nozzle sprays pencil thin lines to 3” (76mm) spray pattern • Minimal spare parts • Easy cleaning and maintenance • Patented handle design produces the fastest needle release on the market • Finger tight assembly tolerances • Excellent for multiple applications, for novice to advanced airbrush users
All parts for the Badger Patriot 105 can be purchased from our store in the UK including the 3 different paint tips,
barwellbodywor...
SOCIAL MEDIA
/ barwell-bodyworks-airb...
#Badger patriot 105 #badger spare parts #badger airbrush parts

[@barwellukairbrushsupplies4324]

It would be great to hear your comments and thoughts

[@GoProGoalieUzi]

Hello, after years of using many iwata neo air brush, I purchased a badger patriot 105 .5mm. It will arrive tomorrow just in time to finish my project. I hope it is better than the neo!

[@barwellukairbrushsupplies4324]

Enjoy it

[@marcfishwick8224]

Steve, on this one, I just bought the badger 105 from yourself, it's on its way, what needle comes with the air brush as standard?

[@barwellukairbrushsupplies4324]

The .5 setup Blue needle end, see our other videos

[@supercededman]

I initally had the 0.5 setup. I bought a 0.3 conversion kit, which came in 3 pieces:
The needle, tip, and regulator. The regulator, as far as I know, has to match the needle size. Am I correct?

[@barwellukairbrushsupplies4324]

There are 4 parts to the 41-044 0.3 conversion kit for the Patriot 105 see video ruclips.net/video/iDUUPYGaM-Q/видео.html , it is the tip not the needle that a airbrush set up size is taken from, all the parts have to be the same size or the airbrush will not work correctly, so yes you are correct

[@chrisbeau76]

Since the needle pokes out, what's the best method to back filling when cleaning, mixing paint with thinner and preventing jams? Can I use the Rubber Needle cover, hold it in place so it doesn't go flying out and then back fill?

[@barwellukairbrushsupplies4324]

I Don't agree / teach back flushing as it can create more problems than it solves, unless you are an experienced air brusher,

[@jimworley4485]

I just bought the patriot 105. When I push down trigger paint come out without pulling back? Can you help? Brand new gun.

[@barwellukairbrushsupplies4324]

Think you found answer in other video on this channel, needle not all the way forward

[@SUAVEstreetwear]

I'm needing assistance with my badger 105. I have cleaned it out 3 times. New needle and tip, nothing in it as far as I can see and it won't flow. When I assemble it air flows fine. But cleaner and paint immediately bubble similar to a back flow

[@barwellukairbrushsupplies4324]

Is the needle bearing missing ?