on a serious note his whole area is a mess the driver should worry about whats on the ground instead of tearing down more material. savage machines though.
And they say dinosaurs are extinct...? I'm running a 349f with 1400 hrs right now and it's the newest slowest pos I've ever ran !!! Deere or Hitachi all the way 👊
Wow. I remember my first day in an excavator. You dump material on the tailgates where I’m from the driver will pull you out of the machine and beat you
Greetings from Ohio, USA ... I have to agree with the earlier post, that this would be a great job for a ripper. I'm sure they didn't want the expense of 2 machines .... There are situations tho where one machine isn't enough. The wear and stress on every part of this machine is unreal .... From the bucket, teeth, pins and bushings, rings, bearings, hydraulics, track & rollers .... Obviously rough material to deal with, but again, too much for a conventional machine. I love these videos, but hate to see them put thru this. I'm NOT critical of this operator .... He's given a job to do, and he's doing it .... it's just hard in the machine! P.S. Thank you MMC for another one.
I was having the same thoughts watching this. Brutally hard on the machine. The last week I have been doing similar work with my (much smaller) machine just with loose rock and that was hard enough on it.
I like the dog. 🐕 Leaving big stray rocks all over the place, irritating, lol. My OCD NEVER EVER drive over rocks & let rocks hit the track; as your boss, I'd beat your ass.
This guy seems lost too me. He is removing his bench then stretching out to cut his face. His load out area is a mess so the trucks are not getting back far enough and the list goes on. All signs of a guy under pressure trying to make loads with what ever he can get his bucket into. If got in that machine at this point I'd stop the trucks for 5-10 min and straighten myself up get my bench a bit higher so I could get some power into the face and then start loading out. At the end of this video this guy had boxed himself out of the game with no were to go. He could operate good enough just had no vision for what he was doing.
I'm Osama from Algeria in 9 years Experience in driving bulldozers Can I get a job in your company? I hope to get your approval and become a member of the company I thank you very much for your respect and appreciation.
Not a very efficient operator or mine. Could significantly lower costs across the board by blasting. Lower costs on: fuel, machine repair and maintenance, truck wait time... but seeing how much they've mined already, and the shape of the trucks and equipment, their not too worried about that. "Run it till it doesn't, then get one that the 3rd owner is selling." Must be their moto...
For Americans who don't understand..This is Southern Eastern Europe near the Med..they often rely on machines and trucks handed down from West/Northern Europe - this is how it works in countries like Greece, Albania, and the rest of the East. This is usually where these machines come to finish off their useful lives.
MY DOGS ALL AKITAS YEARS AGO AND MAINLY REALLY MY FIRST ONE IN 87 WENT WERE EVER I DID INCLUDING ON AND IN AND AROUND EVERY SINGLE CONCEIVABLE PIECE OF EXCAVATION EQUIPMENT NO MATTER HOW LONG THE DAY BESIDES FOR SKID STEER LOADERS TO TIGHT FOR HER TO FIT. KATINA THE AKITA AT 120 LBS WAS NO LAP DOG.BUT IF YOU LET HER SHE WOULD HAVE TRIED TO FIT ON YOUR LAP TO CATCH A RIDE OUT OF THE WOODS AND UP THE TRAILOR AH,THE OLD DAYS.I OWN ONE TODAY 100 LBS THAT IS RUNNING FROM THE SNOWBLOWER ? GO FIGURE ? I GUESS ME BLASTING THE SHIT OUT OF HER WITH SNOWBLOWER AT THIRTY FEET PROBABLY DID NOT HELP. THE OTHER 3 LOVED ANYTHING THAT MADE NOISE BLEW SNOW OR SMACKED THERE ASSES WITH A LOVE TAP FROM SOME KIND OF BUCKET FOR NOT PAYING ATTENTION. SORRY, THIS EXCAVATION THING GOT CRAZY LOST ON REALLY YOUNG HEALTHY GOOD TIMES. MADE A A LOT OF MONEY DOING WHAT I LOVED, EXCAVATING AND I WAS REAL GOOD AT IT. GOD I MISS IT PERIOD.
You sure as hell better not load the truck bed up front,,, when you raise it the lower dirt will slide off and the other dirt will break the bed in half
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Boa noite muito ótimo esse trabalho máquina amigo
This is the best operator I see that works 385C with Rock
. He knows what he’s doing.
Видео супер круче любого рок концерта😄👍
What a machine! Probably one of the best money can buy!
Hi
Desde Santa Cruz bolivia 🇧🇴 excelente 💯 puntos 👏 el video 📹 mmc
Nice
Whoa. I thought you were going over the edge at one stage. Great video, great position; up close and personal.
on a serious note his whole area is a mess the driver should worry about whats on the ground instead of tearing down more material. savage machines though.
素晴らしい
He was scraping the underside of the machine on big rocks. If it were mine I'd give the operator a rollicking.
Exactly
And they say dinosaurs are extinct...? I'm running a 349f with 1400 hrs right now and it's the newest slowest pos I've ever ran !!! Deere or Hitachi all the way 👊
wow!!
ต้องแนวยาวตามรอยระเบิดตั้งฐานแนวยาวไม่แบบนี้ ถ้าแบบนี้เปลืองและช้าด้วย
โห่คนฉลาด คนเก่ง เราทำงานอะไรอะ
Este men sabe es bueno
Wow. I remember my first day in an excavator. You dump material on the tailgates where I’m from the driver will pull you out of the machine and beat you
Not sure Look for roller compactor who buy a tractor
How are roads in the pool but songNot sure
Not sure Look for Robert and come back to
call the police and have him arrested.
It all seems very casual hahaha
CAT 💪🏽💪🏽💪🏽💪🏽❤
DOG 8:05 crazy !
The big rock at 4:28 : I don't wanna go, I want to stay.
Excellent videos that I really enjoy watching........keep up the good work.
Top
Greetings from Ohio, USA ... I have to agree with the earlier post, that this would be a great job for a ripper.
I'm sure they didn't want the expense of 2 machines .... There are situations tho where one machine isn't
enough. The wear and stress on every part of this machine is unreal .... From the bucket, teeth, pins
and bushings, rings, bearings, hydraulics, track & rollers .... Obviously rough material to deal with, but
again, too much for a conventional machine.
I love these videos, but hate to see them put thru this. I'm NOT critical of this operator .... He's given a job
to do, and he's doing it .... it's just hard in the machine! P.S. Thank you MMC for another one.
I was having the same thoughts watching this. Brutally hard on the machine.
The last week I have been doing similar work with my (much smaller) machine just with loose rock and that was hard enough on it.
Acemi 😏
Nice vidéo goot
The Dog 😳... nice video 👍🏻 but for this work / material would be an Xcentric Ripper something??? 🤔
That dog is METAL. It just did not care.
Essa é bruta!!!!
Super machine
Красавец 👍
great job operator
Da ist ja nur noch Werbung bei euren Clips 😈😈😈
That dog is so used to big machine it's not bothered
8:00 Chilling out in a rock quarry.
Material ruim de escavar, bom trabalho
Máy đẹp
get one with a ripper and the other loads the trucks. And boom ur cats would last much longer
Bonito e o ronco da bruta
👍👏🙏
Quay ít thời gian quá
Turn the throttle up and start cleaning
The operator is used to beating up smaller machines and now has his chance to kill a big one
# Rip and load
God dam them tracks are squeaky as hell
8:15 dog and danger? What are you doing dog? 😁
The dog is fine hes not stupid.
Tyler Mac hey what about me can I drive this Thing
I like the dog. 🐕
Leaving big stray rocks all over the place, irritating, lol. My OCD
NEVER EVER drive over rocks & let rocks hit the track; as your boss, I'd beat your ass.
If theyre not going to blast it then use a shovel, thats the wrong equipment for the application.
This guy seems lost too me. He is removing his bench then stretching out to cut his face. His load out area is a mess so the trucks are not getting back far enough and the list goes on. All signs of a guy under pressure trying to make loads with what ever he can get his bucket into. If got in that machine at this point I'd stop the trucks for 5-10 min and straighten myself up get my bench a bit higher so I could get some power into the face and then start loading out. At the end of this video this guy had boxed himself out of the game with no were to go. He could operate good enough just had no vision for what he was doing.
I
U
Der konn ned gescheit baggern.
genau des hob i ma noch 1 min a denkt :D
I'm Osama from Algeria in 9 years Experience in driving bulldozers Can I get a job in your company?
I hope to get your approval and become a member of the company
I thank you very much for your respect and appreciation.
Низко сидит. Полку выше надо держать, черпать удобнее.
Whats the mineral in this area ?
Sierly
This material and ore or sterile?
Not a very efficient operator or mine. Could significantly lower costs across the board by blasting. Lower costs on: fuel, machine repair and maintenance, truck wait time... but seeing how much they've mined already, and the shape of the trucks and equipment, their not too worried about that. "Run it till it doesn't, then get one that the 3rd owner is selling." Must be their moto...
half of the product ends up on the ground😂😂
Material aside, the operator is just not efficient...
I'm sure you could do better seeing your intelligence is so high you think youtube is a good place to give advice and run your mouth....
For Americans who don't understand..This is Southern Eastern Europe near the Med..they often rely on machines and trucks handed down from West/Northern Europe - this is how it works in countries like Greece, Albania, and the rest of the East. This is usually where these machines come to finish off their useful lives.
MY DOGS ALL AKITAS YEARS AGO AND MAINLY REALLY MY FIRST ONE IN 87 WENT WERE EVER I DID INCLUDING ON AND IN AND AROUND EVERY SINGLE CONCEIVABLE PIECE OF EXCAVATION EQUIPMENT NO MATTER HOW LONG THE DAY BESIDES FOR SKID STEER LOADERS TO TIGHT FOR HER TO FIT. KATINA THE AKITA AT 120 LBS WAS NO LAP DOG.BUT IF YOU LET HER SHE WOULD HAVE TRIED TO FIT ON YOUR LAP TO CATCH A RIDE OUT OF THE WOODS AND UP THE TRAILOR AH,THE OLD DAYS.I OWN ONE TODAY 100 LBS THAT IS RUNNING FROM THE SNOWBLOWER ? GO FIGURE ? I GUESS ME BLASTING THE SHIT OUT OF HER WITH SNOWBLOWER AT THIRTY FEET PROBABLY DID NOT HELP. THE OTHER 3 LOVED ANYTHING THAT MADE NOISE BLEW SNOW OR SMACKED THERE ASSES WITH A LOVE TAP FROM SOME KIND OF BUCKET FOR NOT PAYING ATTENTION. SORRY, THIS EXCAVATION THING GOT CRAZY LOST ON REALLY YOUNG HEALTHY GOOD TIMES. MADE A A LOT OF MONEY DOING WHAT I LOVED, EXCAVATING AND I WAS REAL GOOD AT IT. GOD I MISS IT PERIOD.
Thats a waste of time using those tiny over the road trucks for this.
I feel for the operators and their machines. This ground should be blasted first.
ehhh what the hell is that dog doing there ???
my wife is trying to get another husband..i say let her go !!! hahahahaha
MrGreendragon3 a9
You sure as hell better not load the truck bed up front,,, when you raise it the lower dirt will slide off and the other dirt will break the bed in half
No sirve el operador la máquina si
Lol
Erm not good at all
Mal operador le falta criterio de trabajo
Le deberían poner el medio bote
Sloppy
operatore escavatore,molto scarso!!!
Look mami I have a 2md maching and am f. Idiot.
horrible operator
This guy is a crappy operator.