nice! couple questions. can this be used for mini 3 battery? and also 'create' a new battery by removing old cells and replace with new ones? like maybe LiIon 18650? presuming its whats used for battery+
Hello, you don't need this tool when replacing cells in mini. At least for mini1 and mini2 you didn't need it. You just have to be sure when changing cells to have the same voltage, otherwise the battery will go after powering up into error because of unbalanced cells.
Chào... Tôi có dùng cp2112, nhưng khi kết nối pin mavic 2 là vẫn kết nối đc nhưng ko đọc đc thông tin và mở khoá pin đc... Mong bạn hướng đẫn thêm. Cảm ơn
Hey you are a great person I'm very grateful to you with your help I managed to unlock my M2PRO battery But the attempt to change the number of cycles fails. The program hangs. what's my mistake!???.
Hey Yes, I did exactly that, but when I click to overwrite cycles, the DJI Killer program hangs. Already made many attempts, but without success parameters remain unchanged
hi sir, i have managed to click on unseal / unseal 2/ clear pf/ clear pf2. but my battery is stuck on always on mode. i am unable to turn off the battery. could you please advise?
Can you hepl pls? I was able to read the data, unseal and reset it but seems that it is not really doing anything instead of just read, my battery still not lighting up. I also tried to modify the cycles count and every time the software crack down so i close it and open again and the cycles still the same so it is nt making any change. I tried two different versions of this software (cables too to make sure) and still have the same thing.
Hola saludos de Uruguay tengo una bateria que nunca cargo de nueva voy a probar con este sistema compre el cp2112 me falta el sotware si tene algun dato te agradesco gracias
just one question. i tried to change the cycle count but after changing the program just show "you entered value = 0x0A = 10A" until then only. the program hang already and cannot press anything anymore. need to close the program forcely. any idea why? thanks for the help
@@carsdrone3721 ok got it, first i "unseal" then read info then change cycle and it works. before i unseal and clear PF2 before i change the cycle and it always hang. now ok. thanks a lot able to replace the 4 cells and now its working.
@@carsdrone3721 one more question, now i have replaced the 4 cells and its now working the only problem is that the timing for the battery became lesser. instead of 31minutes it became 25mins only. any idea how to put back to original or atleast 30mins flying time?
I made the connection and connected its charger together and was able to restore one, but my other battery recognizes it and reset its parameters with the software but it still does not turn on its LEDs or charge, what could it be? is for mavic 2 pro and the battery model is FB2, thank...
Because dji lock the chip , so we need to unlock it , and after that we can change the parameter or clear the fault ( when disconnected batt cell or cell error ) and make batt live again
Hey... I got the CP2112 board as well as the DJI Battery Killer software, got all the connections done as well. However when I press the connect button, I get the error saying Could not open device. What should I do? Please assist thank you
As i said in the video ,sometimes you have to try another ground pin or charge dead batt and right after that connect to Cp2112 this step to active the board so it can communication with cp2112 and we can unlock it later
@@carsdrone3721 I have managed to charge the individual cells upto 3.7V but still the same error where the software can't open the device. What else can I do? I have 3 batteries that were in storage and are dead while one battery is functional. The good battery also doesn't connect via CP2112. Please help
@@gerjayson96 No i don't said you to charge the cell . Plug the dji charge to the board and right after that connect to cp2112 If you still can't connect maybe the board is dead and you need to buy a newone
hey i am getting a error message on my drone which is a mavic zoom . i put a adapter chip on it for more battery power. and now i am getting a error message that read's only enough battery power for [RTH] return to home. do you no what i can do to fix this error
it is hard to tell because i don't know what the warning is . but i assume maybe it because your battery is imbalance . you should check the voltage of each cell by dji app
Thanks for the tutorial! I'm also getting an "Error: could not perform smbus read 0x00". I changed to all ground pins and tried on 3 batteries (2 dead and 1 working). Same error for all ground pins for all 3 batteries.
Hello, I've seen your video "Hacking Laptop Battery Using NodeMCU & Arduino" and I have a dell battery TYPE: J1KND, and I want to reset it, but I need the correct diagram for it, or even for another battery like lenovo L116Y01.
Hello, i have a problem with the software. Everything works fine until the clear pf2, it starts and it says everything is successful but than the software gets stuck and it freezes every time. What can i do? I tried it so often, it happens with all three batteries. Maybe its because im running 32 bit dji battery killer? Is the a 64 Bit version of the software?
Se a carga está muito baixa, o processo de desbloqueio dará erro. Uma solução seria carregar cada célula a um mínimo de 3.5V antes de realizar o procedimento. Cuidado para evitar curto circuito.
As i said in the clip , try it fewtime or put batt in charger and right after it connect to cp2112 Do it to active the board so it can conmunication with the module
I never get this issue . The most important thing is you have to calibration the battery so the board can know the real capacity of the pack If you don't the board may wrong and % of battery wrong so voltage can drop too low , and the board will shutdown to protect the battery
Hello Bro, when I try this method on healthy mavic air 2 and mavic 2 batteries, unfortunately, I cannot read information and I encounter the error message "ERROR: Could not perform SMBus read 0x00", I wonder why the problem is caused, can you help? If you want additional information and screenshots, I can send you by email. Many thanks for your sharing.
As i said in the clip sometimes you have to change ground pin or disconnect or press read info few times Or you can plug the charger in batt and right after that connect to cp2112
you might accidentally interchanged the sda and scl wiring. it happens to me. or you can just transfer the grounding to another pin. once connected "unseal" first the read info
why in my application there is no battery cycle count, is there something wrong in the installation of the application? how to bring up the battery cycle count?
Thanks for your reply. Was able to download and unlock battery. Great help.
can you send me the software ?
PERFECT! You are King, it works thank you very much
Hi what drivers does the cp2112 need or is it plug and play? I have the dji killer app. Thanks
@@andywu7583 Hi, yes just plug and use softw.
Hello, what option should I use for spark? do I use the mavic mini 1 interface?
Hi! thanks for the video. will it work with phantom 4 battery?
Can I use the FX2LP interface?
Does DJI Battery Killer recognize the FX2LP interface?
Thank you.
any idea after clearing PF LED stays on. Mavic air 2.. any help. thanks
New version of the program you can find in the internet and our group in the telegram
nice! couple questions. can this be used for mini 3 battery? and also 'create' a new battery by removing old cells and replace with new ones? like maybe LiIon 18650? presuming its whats used for battery+
Hello, you don't need this tool when replacing cells in mini. At least for mini1 and mini2 you didn't need it. You just have to be sure when changing cells to have the same voltage, otherwise the battery will go after powering up into error because of unbalanced cells.
Not the same voltage as the old battery I mean. Just same voltage for both cells.
Is there any way to also know the battery chip? is for mavic 2 pro and the battery model is FB2, thank...
e chào bác ạ! bác cho em hỏi, pin em để lâu không sạc, giờ bật không lên. Thì nếu kích, thì ấn vào nút trên phần mềm đó ạ. e cảm ơn ạ
thanks man
Thanks Bro!
Chào... Tôi có dùng cp2112, nhưng khi kết nối pin mavic 2 là vẫn kết nối đc nhưng ko đọc đc thông tin và mở khoá pin đc... Mong bạn hướng đẫn thêm. Cảm ơn
Hello. Works also on Spark batteries? I don't see "Spark" in the help window with the battery pinout. Only Mavic.
Where do you get this kit with the software???
any chaches to fix the TB50?
Video Smart battery DJI T20 pleas 🙌🏻
Hey
you are a great person
I'm very grateful to you
with your help I managed to unlock my M2PRO battery
But the attempt to change the number of cycles fails. The program hangs.
what's my mistake!???.
You have to re- read data + unlock + type the cycle and hit the "cycle count" to change it
Hey
Yes, I did exactly that, but when I click to overwrite cycles, the DJI Killer program hangs.
Already made many attempts, but without success
parameters remain unchanged
Maybe it doesn't work with M2PRO
Have you tested this method!?
@@iroman6502 maybe you should try the unlock 2
@@iroman6502 i test it a lot on mavic 2 batt , it can work perfectly as normal . Maybe you do wrong in some step
can be used for laptop battery?
hi sir, i have managed to click on unseal / unseal 2/ clear pf/ clear pf2.
but my battery is stuck on always on mode.
i am unable to turn off the battery.
could you please advise?
Is it safe to reset the cycle count on a healthy DJI Mavic Air battery? does it affect battery performance?
@@khelay1985 it safe , it not affect any performance
@@carsdrone3721 Ok.. Thank you for your answer
hello where can I get dji battery repair tool program from?
Serve para o fimi x8 mini ?
hello friend !!! would it not work to be able to reprogram the batteries of the phantom 4 ?? thanks !!! hug from Brazil !!!
this method CAN'T work with phantom batt , it only work with dji model i mention in the video
@@carsdrone3721 funciona sim , foi o que eu vi num comentario de um comprador no site de vendas do aliexpress , sei la kkk
cái này xài cái xả pin theo máy thay vì phải ép bay cũng đc chứ nhỉ
Đc chứ bác , nhưng hơi lâu 😅
@@carsdrone3721 haha bay đến lúc nó tự hạ r tháo ra xả bằng cái xả pin chứ cắm đầy thì cũng gắt quá
Good morning, this software comes with the purchase of this card. Thank you very much.
2024 good video
chào bn
cp2112 is expensive can u give, me alternative of Cp2112
Bạn ơi, có thể chia sẻ phần mềm được không? Pin con Mavic của mình, để lâu bị lock pin rồi. Xin cám ơn
Phần mềm có link down ở phần mô tả đó bạn
GREAT VIDEO! Where can I find the download link? my 2 DJI Mavic Air batteries will not receive charge. Thanks for your help!
GoogleDrive link in the description 😗
Hi, can i fix mavic pro 1 battery, with this method?
Can you hepl pls? I was able to read the data, unseal and reset it but seems that it is not really doing anything instead of just read, my battery still not lighting up. I also tried to modify the cycles count and every time the software crack down so i close it and open again and the cycles still the same so it is nt making any change. I tried two different versions of this software (cables too to make sure) and still have the same thing.
After read data you have to unlock the batt
Used unlock 1 , if it not work used unlock 2
Xin chào, Grace cho video của bạn. Và hoàn thành rất tốt.
Tôi chưa tìm thấy liên kết để tải phần mềm.
Bạn có thể làm cho nó có sẵn. Cảm ơn bạn.
hello, my program freeze when i chose 0 cycles or any other number, i have dji mavic air 1, can you help ?
Nice man! It is too for replace baterie in spark?
where can i get the repair tool software nowadays?
Hola saludos de Uruguay tengo una bateria que nunca cargo de nueva voy a probar con este sistema compre el cp2112 me falta el sotware si tene algun dato te agradesco gracias
Conseguiste el software?
friend how can I download this dji software to configure?
Please help i done everything as you but they keep giving couldn’t open the device why?
hi i have "awoken" the battery but it is stuck now and unable to power it off.
any idea how to fix this?
like drone, double-tap the button
just one question. i tried to change the cycle count but after changing the program just show "you entered value = 0x0A = 10A" until then only. the program hang already and cannot press anything anymore. need to close the program forcely. any idea why? thanks for the help
You have to unlock the batt first and then change cycle and hit ok
@@carsdrone3721 ok got it, first i "unseal" then read info then change cycle and it works. before i unseal and clear PF2 before i change the cycle and it always hang. now ok. thanks a lot able to replace the 4 cells and now its working.
@@carsdrone3721 one more question, now i have replaced the 4 cells and its now working the only problem is that the timing for the battery became lesser. instead of 31minutes it became 25mins only. any idea how to put back to original or atleast 30mins flying time?
@@leimye you need to reset all data and them change the design capacity to the new cell so the board can measure correct
@@carsdrone3721 ok thanks a lot!
Ban co o Sg khong? Co the giup minh sua 3 cuc pins Mavic air de lau khong xai gio khong charge duoc nua. Minh se gui tien cong cho Ban. cam on nhieu!
Ở sài gòn có rất nhiều bác nhận sửa pin , bác có thể lên hội mavic air trên facebook để hỏi xem
@@carsdrone3721 , rất cảm ơn Bạn. Nếu Bạn có biết ai ở Sg sửa pin chỉ mình với vì mình không có FB.
Please, if someone can give me a link to download the software (battery kill)
drive.google.com/file/d/1F-hjFhaPGixog1-4q2XkKmVmcSnppLZo/view
Thank you so much. I'm still waiting for delivery cp2112 🤩
How can I unlock PHANTOM 3 Battery ?
How to deal with
NON DJI battery error
Mavic mini 1?
Nhờ anh chỉ giúp cách mở pin phantom 4 bị khoá vs ạ
Phantom dùng chip khác nên cách này ko dùng đc bạn nhé
Great video!. Any info about tools for matrice 300 batteries?. I plan to use custom lipo cells on it
Sorry but i don't know what chip did they used . If it is BQ9003 you can use this tool
cool!
I made the connection and connected its charger together and was able to restore one, but my other battery recognizes it and reset its parameters with the software but it still does not turn on its LEDs or charge, what could it be? is for mavic 2 pro and the battery model is FB2, thank...
why you need to unlock the battery, what reason to unlock sir? im just asking cuz I've no idea but on your video its was amazing,
Because dji lock the chip , so we need to unlock it , and after that we can change the parameter or clear the fault ( when disconnected batt cell or cell error ) and make batt live again
Hey... I got the CP2112 board as well as the DJI Battery Killer software, got all the connections done as well. However when I press the connect button, I get the error saying Could not open device. What should I do? Please assist thank you
As i said in the video ,sometimes you have to try another ground pin or charge dead batt and right after that connect to Cp2112
this step to active the board so it can communication with cp2112 and we can unlock it later
@@carsdrone3721 will try that
@@carsdrone3721 I have managed to charge the individual cells upto 3.7V but still the same error where the software can't open the device. What else can I do? I have 3 batteries that were in storage and are dead while one battery is functional. The good battery also doesn't connect via CP2112. Please help
@@gerjayson96 No i don't said you to charge the cell . Plug the dji charge to the board and right after that connect to cp2112
If you still can't connect maybe the board is dead and you need to buy a newone
how to get dji battery repairing tool
hello great video, I'm not able to access the download link, please send me
Mở mạch dji fpv flash đc k bác
Ko đc bác ạ , nó dùng chip khác ko phải bq9003
hello, how to find such wires on the internet?
how to do this with Mavic Pro 1
Thanks for your help. Does the interface require a driver to work in windows 10?
No , it is plug and play
Thanks a lot, I've bought one of them. Tension of my battery is 12 volt but it doesn't switch on. When the interface come I'll try to unlock it
@@carsdrone3721 It works! My battery is on now. Thanks a lot
Can you give me software link please because i cant find that please
@@Allrounder77860 you can find it in the description of this video. Remove blank space and download it
hey i am getting a error message on my drone which is a mavic zoom . i put a adapter chip on it for more battery power. and now i am getting a error message that read's only enough battery power for [RTH] return to home. do you no what i can do to fix this error
it is hard to tell because i don't know what the warning is . but i assume maybe it because your battery is imbalance . you should check the voltage of each cell by dji app
❤❤❤❤😊
aplikasi troubel when i insert cc.. can u help?
Thanks for the tutorial! I'm also getting an "Error: could not perform smbus read 0x00". I changed to all ground pins and tried on 3 batteries (2 dead and 1 working). Same error for all ground pins for all 3 batteries.
i also have the complete same issue, always not working, what can i do? someone has and idea?
Believe me, many people have the same issue, including myself, but until now nobody knows a solution for this.
I found the solution. I just did a 10 secs video how i fixed the error - ruclips.net/video/x_MaDqLKW8g/видео.html
@@roland4007 I found the solution. I just did a 10 secs video how i fixed the error - ruclips.net/video/x_MaDqLKW8g/видео.html
What cable you use to connected battery??
CP2112 module as i said in the clip
Where can I buy the small cables-wires that connect from cp2112 to battery? Do I get them with the cp2112 when I buy it
@@bmw318iyu you can buy it in any electrical store , just show them the images
Anyone know where I can buy the chip? Aliexpress is to expensive and showing $30-$45
Due to the covid in china so they can't ship this board 😅 maybe you should wait for few month
The link is dead(I did remove spaces)
Hello,
I've seen your video
"Hacking Laptop Battery Using NodeMCU & Arduino"
and I have a dell battery TYPE: J1KND, and I want to reset it, but I need the correct diagram for it, or even for another battery like lenovo L116Y01.
Sorry but maybe you are wrong , i don't have any video like that
And can you give me link the you use this software on use computer for repairing battery
The download link in the description
How can I unlock PHANTOM 2 Battery ? Thank you
This software not support this type of battery
Magic!!
Link for download software is broken..
Where i can download software?
Please
Hello,
i have a problem with the software. Everything works fine until the clear pf2, it starts and it says everything is successful but than the software gets stuck and it freezes every time. What can i do? I tried it so often, it happens with all three batteries. Maybe its because im running 32 bit dji battery killer? Is the a 64 Bit version of the software?
Did you ever fix this? I’m having the same issue
@@amirreu no :(
Not possible download the program...
Remove the space between the dot to downloaf the software
i can not download no matter what dot i remove
@@cossiejay1 software was stolen, it has been removed
the google drive link is broken
where can i find the software ???
Não entendi por que colocou a outra bateria e o cabo vem com o cp2112?
Hello sir my mavic air battery not start and not charge help me sir please
Sir, This is battery rock remove method?
Se a carga está muito baixa, o processo de desbloqueio dará erro. Uma solução seria carregar cada célula a um mínimo de 3.5V antes de realizar o procedimento. Cuidado para evitar curto circuito.
sabe qual é o diagrama de ligação da bateria do Dji mini 3?
EXCELLENT :)
can use this method for mavic pro 1?
No, because it used another type of bms chip
@@carsdrone3721 thanks
Hi, How to fix Mavic Air battery only 3 led indicator visible
Maybe your led is broken . When you fully charge the batt and plug in drone . Does it show 100% ?
PLEASE HELP
ERROR: Could not perform SMBus read 0x00
what should i do?
As i said in the clip , try it fewtime or put batt in charger and right after it connect to cp2112
Do it to active the board so it can conmunication with the module
great video but why the music
Is there a link for software?
Sao tôi tải linh về mà không được bạn ơi
How to reset the cycle count of phantom 4 battery
I don't know how because it use another type of chip 😅
hey i try to load the load the software and can't open it up in my window 10 computer
You should extras all the rar file to an folder , and then you run the software
How to set new capacity value if I replace cells?
You have to read data - unseal - type the capacity of new cell in the box like when i type the cycle count and hit " Des capacity "
where can i find the application Dji battery repared tool? i try to find but i cant found it
Delete the space in the link to download this software
@@carsdrone3721 Thankyou my friend that´s links works. The link of product seems expired already, but in Aliexpress i found. thanks a lot!
can not get the software site down all the time
Nice video,can you fix download link?if is not problem
do not forget after using this program, the battery controller may turn off in flight, this is all at your own peril and risk
I never get this issue .
The most important thing is you have to calibration the battery so the board can know the real capacity of the pack
If you don't the board may wrong and % of battery wrong so voltage can drop too low , and the board will shutdown to protect the battery
@@carsdrone3721 how to calibrate?
Alguém sabe como conseguir o software por favor?
Hey
Why didn't you manage to change the number of cycles the first time!?
Because i foget to unlock batt first so the program is freeze so i have to do it again after unlock the batt
Hello Bro, when I try this method on healthy mavic air 2 and mavic 2 batteries, unfortunately, I cannot read information and I encounter the error message "ERROR: Could not perform SMBus read 0x00", I wonder why the problem is caused, can you help? If you want additional information and screenshots, I can send you by email. Many thanks for your sharing.
As i said in the clip sometimes you have to change ground pin or disconnect or press read info few times
Or you can plug the charger in batt and right after that connect to cp2112
it work?. i have the same problem
you might accidentally interchanged the sda and scl wiring. it happens to me. or you can just transfer the grounding to another pin. once connected "unseal" first the read info
Very good video. Where can I download software please
You can find link in the description
آیا برای باتری مویک پرو همین شکل است ؟
Can i unlock Mavic pro batery with CP2112
@juniorbahia Did you ever find an answer to your question?
@@metoo3918 no
why in my application there is no battery cycle count, is there something wrong in the installation of the application? how to bring up the battery cycle count?
You need to read data first , and then unlock battery
@@carsdrone3721 I try but can't work 😔
What is the benefit to unlock the battery, thanks
So you don't have to buy the new one 🌝
And you can modding the battery for much longer flytime and have all the convenient like original batt
Sir Divase kaha pe milegi