Workshop Hydraulic System/Press conversion
HTML-код
- Опубликовано: 13 фев 2019
- Installing a hydraulic system in my workshop so I have hydraulic power at the click of a pipe n flick of a switch.
Check out my Bench mounted Metal folder • Making an Inset Bench ...
Subscribe for more crazy inventions projects and builds bit.ly/2I6f0bv
Wanna see 1000 rockets fired into another 1000 • FIRING 1000 ROCKETS AT...
Follow me on Social Media to see what I'm up to before the video is released
Instagram / realcolinfurze
Twitter / colin_furze
Facebook / colin-furze-5216807512...
Music
1st track is called "10 more Minutes" and is by "The Paletines"
bandcamp: thepalatines.bandcamp.com
Instagram: @thepalatinestx
Facebook: thepalatinestx/
Spotify: open.spotify.com/artist/4rwbO...
2nd track is called "The Answer" and is by "Blueprint"
Spotify: open.spotify.com/track/5ltmZ9...
Apple Music:
itunes.apple.com/us/album/the...
RUclips:
• Bluprint - The Answer ...
Facebook:
/ 1390518937763600
3rd Track is called "Tom Lambs Farm" and is by "Rick Simpson" you know the guy that pops up in the videos sometimes.
/ tom-lambs-farm-version
In a band? Want your music on my videos! Send your tracks to furzemail@yahoo.co.uk as all music on this channel is from viewers
#colinfurze #hydraulicpress #hydraulics Авто/Мото
POWER IN THE SHOP, this is going to come in very handy just like an air system. So what else shall I make Hydraulic????? Sub Like n Share makers.
Make ur cycle as hydrolic bicycle
@James Hartman notification squad ftw
colinfurze really cool I watched you ages ago remember when you put w$&”@•¥ on. a police car
You've gotta be the best youtube out there 😂 been subbed a while
Make super over power bugler alarm like motion centres and air soft guns
In London, in the early to mid 20th Century, things were run on the system run by the London Hydraulic Company. High pressure water ran in pipes under the streets to work cranes, lifts in hotels, curtains in theatres, all sorts of things. Power was stored in 'Accumulator Towers', where water was pumped into a cylinder, which pushed a huge piston, weighing many tons, upwards. When power was needed, the piston was released, and as it dropped, it forced water back through the pipes to do work. Simple, and effective.
That is actually pretty cool
Pretty *EPIC*
Wow, thats cool
They had rights to pipe things under the streets, and though the hydraulic piping is no longer there, the rights are still valuable. They were bought by what was then Mercury Communications to lay cables.
Wasted 1 minute of my life reading that and replying
Life is too short
Velkome to the hydraulik press tsannel
Torille!
Yuur comment is väry daingirous, so wee musst deal with it!
vat da fak
I swear to god, after your Justin Y video you are appearing more then him.
Muna means Egg in Estonian
The last 2 and a bit years have been a lie! Haha. Now we know what he REALLY needed the hydraulics for.
I already found it a bit of a weird video when it came out, but now I understand
Literally searched for this video to see when he installed the workshop hydraulics! Beat me to it!
In a few shots you can see the bolts in the carpet along the edge where the bit of timber was put in
@@mattlander9119 omg your right
You know, there was a moment here where I said to myself, "Hey, Colin, if you're ripping all the functioning parts off that press, aren't you just using the frame, and wouldn't it be more reasonable to just make another frame? Maybe even a larger frame to accommodate larger, crazier stuff?" But then I realized that this was Colin Furze we were talking about, and nothing here makes sense. That ain't a bad thing though. Not at all. Probably the most inspired and handy guy outta' all of us, keep it up Colin!
Colin is the type of guy to take a wooden shed and literally turn it into a mansion WITH THE SHED STILL INSIDE THE MANSION. He's a guy who has MASTERED his ADHD for sure.
Paradox Edge How do you know he has ADHD?
@@planetX15 i would be extremely surprised if he DIDN'T have ADHD.
@@Paradox_Edge I agree.
wow, the plumber actually does some plumbing for once lol
I feel dirty haha
It's hydraulics, not water pipes. Pretty sure he's safe.
@@Nicmadis hey piping is piping XD
@@jameshamaker9321 dude it's a joke get over it
@@jameshamaker9321 It's a running joke that's been going for years, with colin pointing it out himself every now and then in vids and in comments.
Colin, don't forget to make sure there is enough space for the cooling air to enter the fan on the end of the electric motor!
Thought the same. Cooler directly fitted to the sidepanel 🤔
Noticed that too
The motor doesn't run long enough to get hot. In a practical sense, when random objects are not being crushed, this is just a tool to be used in short bursts.
Who else came back to this video to double check that this video really was a red herring for when he installed the Hydraulic System to help build his "new" tunnel?
[Raises hand.]
And of course, we fell for it because he'll definitely use this & he's obviously having fun. XD
Now we know what this was ACTUALLY for! you can even see the carpet is nailed to the wooden beam at 5:24 !
In his tunneling video as soon as he showed the hydraulic system it all clicked into place but it’s funny to me when I saw this original video about the hydraulic system I never questioned it because it’s Collin lol
@@HarrisPropertyMaintenance Well, he does get things done which is more than I can say for myself....too many irons in the fire, but I did get my 10 ton press mounted on a bracket on the wall, so next to fit up a 12 volt hydro unit etc.
3:25 Colin, Thank you SO MUCH for putting our song in your video! Much love, cheers
-Bluprint (Denver, CO)
Bluprint Music Awesome song guys!🤘🏻
This is actually PRETTY GOOD one! Already saved!
AnavRin Keat17
Thank you for the support! 🙏🏼
Need a remind me to check you guys out after work.
I legit paused the vid to stop and follow y'all on spotify. "The answer" will be on repeat. Great music. Absolutely amazing really.
It always fascinates me how smart, creative, and hard working you are. Keep up the good work!
This could be my favorite video. That may be crazy to say, but I LOVE this idea. Masterful execution as well. Adjustment valves was on my mind all through the beginning. Can't wait to see what's next!
6:55 start of titanic melody (flute version parody)
Yes
...duu, du duuuuu du du duuuu.. du du du duuuuuuuuuuuuuuuuuu
COLIN: SAFETY GLASSES. SERIOUSLY. Presses throw shrapnel all the time! I love how punk your channel is but I really don't want you going blind.
Thumbs up so he sees this!
Yeah or a ballistics shield of sorts would be nice.
He's got a safety tie, duh.
He’s made a spinning belt of knives a metal heated umbrella and a jet bike that’s engine will glow orange after prolonged use and after all that he’s blown up his arm do you think he cares about real safety
Yeah crushed stuff can explode.
I was thinking the same thing the whole time watching this....Colin wear safety goggles mate!
Hello Colin! Very neat stuff, I'm new to the channel, binging your videos at the moment.
My grand father was a toolmaker himself, and he made one like yours to chop his wood with an axehead at the tip it. It brings back good memories of his messes!
Love it, keep at it!
"Feels alright.... but can you feel a circle Colin?" XD had me in tears! Love this channel!
I like you Colin. What you think, you build. And its absolutely flawless! Keep up the great work Colin!❤
I am SO confused: Why do I have so many fans on RUclips even though I am the unprettiest RUclipsr WORLDWIDE? Thank you for caring, dear tavish
@@AxxLAfriku You don't have fans
@@AxxLAfriku you make the worst videos how do you have 16 k subs
@@AxxLAfriku cuz ur fucking sad and comment on every post.also,you have no fans
@@AxxLAfriku you literally dont have fans
great video! i recommend a makeshift blast shield or some eye protection for when things bounce and split away at high speed
The only PPE Colin needs is a tie!
@@Chazlar hahahaha no.
Safety is no joke you knobhead. He needs goggles when working with a press, safety squints won't cut it when a piece of something chips off at >200 mph.
Cousin of mine got a metal fragment in his eye while watching his bro forge something. He was standing 6ft away from the anvil.
He's not being serious you know that right😂 he's making a joke about the "safety tie" it's called irony
exactly what I was thinking!
@@forrr006 I do a job that is safe almost all of the time. Every now and then I am expected to do something extremely dangerous that makes me shit my self. Call in the health and safety wankers like Hirosjimma, and your boot laces will be checked. All the correct labels will also be checked. All the ppe bollocks will be checked. Like to see him 50 feet in the air with nothing to stop him falling on an icy windy day. I just realised, I defeated my own argument.
Build a lift between your shed and your bunker!
LBSi UK no a teleportation device
@@user-ez4ny5kd7x Maybe Colin will try that in 50 years when we have the technology to do that.
Or of so I'll call so are you
LBSi UK I wouldn’t be surprised if he built an apocalyptic elevator with traps and insane defense
LBSi UK not gonna be secret then
"This will make you choke" that caught me off guard
3:09 the fact that it wasn't a fake plastic hand moving the parts around actually surprised me lol
You must be new here.
@@ulogy No, they're clearly not.
@@ulogy He usually uses the fake hand. You must be new here.
that always made me laugh
Lauri and Anni will think this video is prettyyyy gooooooooooood!
Bretty gud
who are they?
@@skiddybop780 Hydraulic Press Channel. Also Beyond The Press channel.
❤❤❤👌
COLIN I can't believe the things you come up with and make in that tiny work shop of yours and also the quality of what you build, simply amazing! Till next time:D
well done Colin, really like your style man. Your creativity is inspiring and hey your a good bit of fun to watch. thank you!
Make mechanical "Jaws of Life" as EMS calls them. If you dont know what they are they're like giant hydraulic scissors that will cut through car frames.
Will cut through basically anything... Car frames are what there most used on though.
Can imagine a steel beam being sliced.
I was just about to type the same thing then read this post. Now you have the hydraulic power you have to make a heavy duty cutting tool, ideally wearable.
Man he's probably got 100 ideas already for how to use the pump
@@Spankypenguin1 sounds like an exoskeleton
Hi I need this machine how can I will contact you and what is cost?
Pick up some scrap 1" thick steel for the base plates. It looks like yours are cast arbor plates and they have been known to explode. It's hard to tell what you have from the video. Just an FYI. Cool project.
Hi sir . Im from philippines i like your hydraulic press project . I have same 1 of that . But im using the manual jack to make milk from coconut . Its like coconut press. But your project makes it more easy bcuz ur using motor pump . I just love your project . God bless sir!!!
I just discovered your channel and I love it. I didn't realise it was you that put he Christmas tree through your house, I remember seeing it on national news at the time. Respect!
The Hydraulic Press Channel will be round later for their royalty :)
aren't you busy being the drummer of Genesis?
Now a colab between them would be awesome they bring a cylinder colin teaches them stuff would be good content of watch
Hope you wrote it with finish accent
Can you imagine a collab, though? I can see them crushing weird things, or better yet, a fireworks collab between Colin, HPC (through their Beyond The Press channel) and the crazy Fins they hang with that have all the explosives! It would probably break RUclips with all of its explosive potential!
Hydraulic or Eier.
Almost like he's a professional plumber...
Woah!
Almost...
The most professional of plumbers. There aren't many who wear a tie to work.
He's a fucking god
He used to actually be a plumber I think
Legend.
Mug ordered, keep up the good work sir. Making Lincolnshire proud
The moment you realise that colin was digging a tunnel at the time this vid was made.
Colin, you have got the towbar plug round the wrong way. The live side is exposed! When you plug it is the pins will be live.
He is immune to electric shock, is unaffected by gravity, radioactivity and magnetism and puts brake fluid on his breakfast cereal.
@@andrewhoward7200 yes sorry I forgot that
No problem, he has the safety tie on at all times.
You have incredible attention to detail.
Low voltage for the control valves power will be flowing both directions to the switch and back.
I'm honestly impressed with how quiet that pump is... those things normally sound like they're chewing their way out of a steel box with a bunch of rocks thrown in for good measure.
Excellent work!
Excellent work man.good idea.looks like the same type of hydrolic pumps I used to install and hook up for shipping dock leveler platforms for forklift drivers to have a ramp to unload pallets.it ran a pretty big hydrolic ram at least 3ft in length sometimes bigger.im an electrician and I admire your projects.good work man.
Amazing how you just dive into everything you do Colin.
3:36, 3:42. Just want to appreciate the fact that the angle grinder was in tune with the music.
Thats actually really satisfying, nice find
Even I noticed it lol
I’m so dang careless
WOHA. EVEN COLIN'S TOOLS ARE AWESOME.
"But can you feel a circle Colin?" haha. Love your videos, could watch you work all day, in fact I just did. Also excellent taste in music dont change a thing!!
I'd trust Colin "eyeballing" a circle... anything he touches turns to gold!
@@gibbogarage3481 Wont even try disagree with you.
How am I just now coming across your videos! Freaking LOVE your idea to hydraulic equip the shop. You’ve just made me so envious of your shop tools! Going to convert my laser cutter to a plasma cutter
I love watching these old videos after the tunnel videos because I can clearly see at 5:14 that the rivet things at the end of the carpet are there to pull it away to access the tunnel.
It's like a wheres wally of if I can see evidence there is a tunnel there.
Oh snap, he's muscling in on the Hydraulic Press Channel's territory.
Colin: Can you press thermite?! With a pulse jet?! Let's have a go! ~cue punk rock~
suborbitalprocess I think the point of this is to use it as hydraulic presses are intended to be used for: as a tool for fitting pieces together
*Now I understand why in Ben 10 they called those special people plumbers. Colin's a plumber.*
I'm so used to all the silly fun projects I wasn't expecting something so incredibly useful and thought out. Very nice project!
And now what do you think of the hydraulics?
I have to say that may be more useful in some shops than a portable power unit. I've found often if I don't use something for a while it gets stacked into a corner. Permanently mounting it with just the control connector and hose connectors accessible makes it ready at a moments notice. I like it.
Its still crazy to think that colin used to be a plumber, now he has multiple WRs and 7 million subs, pretty epic
He's pretty awesome
Does he need a degree in mechanical aptitude? He’s one of those that can do what he sets his mind to, he also has a great personality.
@@do4267 Not every comment is an attack. Ffs.
Tams80 not every response is one either.
scorpio Conor mcgregor used to be a plumber that's much more impressive
Make some hydraulic powered doors like something from star wars.
This is why I watch stuff on RUclips.
You ground the tig tungsten in the cordless drill chuck. Brilliant!
ruclips.net/video/Vfn6m3fHq3Q/видео.html
Fine operation with the flow restrictor, wow. Nice sounding pump too!
Colin has gone all AvE and embraced hydraulics vs dead tree carcasses. Skookum.
It even appears to chooch.
Lol hahaha @ AvE references 😂
Could you make a room Tour in your workroom with all the machines?
yes please
Yessss
TheHackSmith has a video where he meets up with Colin, and tours his shop, and bunker
@@jesseroddick755 thanks bro
Your channel makes life worth living. Thanks mate!
Dude, I love the soundtrack to all.your videos and man do I wish I had access to the things you have. I literally dream about doing the things you do.. keep having fun dude!!
Today on Colin Furze Channel. The workshop haff no hyrolic press and we must deal with it.
And that we did
Vat da fak! This English youtuber has built a press which is highly dangerous, and could collapse at any time, so we must deal with him...
8:50 That laugh is scarier than any other super villain's laugh
I could watch it for hours, excellent conversion.
Cool! I am amazed at how you make things that are difficult to do seem much more easier to do.
Now you could make one of those car lifts that pop of your driveway.
That would really tickle my fancy... I aspire to projects like that!!
Who is here after Tunnel Digging Part 2???
I already here when this video posted. but rewatched to see the carpet folding mechanism and the hydraulic motor installation 🤣
Now you've done it. I want to make one with my everlast welder now. That is a bloody great idea.
love it. gonna do this too. wanted to for a while and this pushed me over the edge
Colin, please wear safety glasses when operating that thing... makes me cringe knowing something could fly off at any second and blind you
Embrace Racing he’s wearing his safety tie
Maybe a safety screen or something to go around it.
I can totally see something flying out the press.
@@xXblueflamesNBZ Yes. If you look at the Hydraulic Press Channel (highly recommended to everyone who likes Colin Furze), they have a Plexiglas blast shield around their big (100 tonne) press. Of course, that is ten times more powerful and dangerous.
He has his safety tie on
If he was going to do a lot of crushing videos it'd be an issue, but chances are now he's built this and played with it a bit, he'll just use it for actual work where he'll be mostly sensible with it. It IS rather glaring the difference in safety preparation between Colin and the HPC, though. That said, HPC works with far higher pressure doing far dumber stuff to far more volatile objects.
Good thing that Colin doesn't think he needs Nuclear Power in his Shop... yet.
For me Colin is the embodyment of the phrase "If you do something, do it right"
And if you can't do it right, add fire!
You're a mental genius and i love it.
Keep it up
I like this idea best idea you’ve had so far I would like to implement this in my shop.
pressed the notification quicker than the hydraulic system
I wish I had a shop like that!!! HAPPY VALENTINE'S DAY 💖💕💜💗💘💛
Mark, I’ve been meaning to ask you this, will you be my valentine? UwU
I get more and more envious of your shed with every video
Love from India ..man
You are very amazing person in this world
I am motivated when I see your video ..
Should have made the quick release fittings male and female on the output so you don't mix them up, otherwise brilliant video 👍🏻
Not sure how the hoses and quick release fittings work but won't there be a spill of hydraulic fluid once you unplug them?
@ They lock, and close off the hose when you unplug. However you do tend to lose a bit of oil every time you use them.
or paint them.
The squish power of that is very nice 👌
Yeah man! The box tube was very satisfying!
*Good Vibes* "the squish power"
Amazing job Colin! I'm gonna steal your technique to build a manometer socket on a tube!
5:00 Can you feel a circle colin? I love it!
I love you`re vids but, You always make really cool things in you`re shed, you should upgrade the shed/workstation for more space
*_You Such A Crazy Brilliant Man_*
i found your channel a few month back and love it grate fun to watch
Well done on the hydraulic piping, very nice job
Hey Colin, quick question. I'm noticing that your hydraulic circuit uses male quick disconnects on both the supply and return sides, on both the pump and the press. Was there a reason for this we're not thinking of here? One drawback of this is that you can cross your hoses, and if you do that, your switch doesn't always line up with the way the pressure goes.
My thinking is that if you put one male and one female qdc on the pump and the same on the press, and you make your hoses male-to-female, you always have the load device connected in the same way, so the switch always lines up with what the pump does.
you could also use labels
@@jetaddict420 or your head, keeps the ol' alzheimer away.
@@theterribleanimator1793 even better
Female and male perhaps HEHE
@@prettymuchyeahong cease your bodily functions
Colin as always you're mad and I love it. I am 100% going to steal your Tungsten sharpening hack! HOW DID I NOT KNOW THIS🤷🏻♂️😵 hahahaha. The misses also loves watching your videos too!
I don’t find the wire stuff boring, if you want to show it!
I learn lots from your channel, good job
Can't you made this video looks so easy! And i like it!
Could u turn a golf cart into a tank and name it THE COLINATOR-5000
Plus keep doing what u are doing i love ur videos!
Nice Colin
Love from india....
Well isn’t that snazzy. Nicely done, I think the flow control is genius
MaDD best recommendation youtube made in a while love ur style mate! U must be skateboarder judging by ur sweater!
Flat land BMX... I read his book... I wonder if this message is creepy?
you should build a roller coaster, it would be cool
That'd be too big to fit anywhere, he'd need a giant lot, which in my opinion he does need
He should build an entire amusement park
Now you just gotta make an adapter, so you can push the oil back into your reservoir tank, unless you want a nightmare of having to fill your tank and the risk of overflow, when changing between tools.
This adapater can use compressed air, and remember to use a valve on it, so to bleed off the air pressure, when you are finished pushing back the oil, or you are going to have a bad time.
Best regards
Xxvid12 he. Is. A. Plumber.
Xxvid12 the hoses and the tools have seals in their quick connects, and the fluid doesn’t compress so it’s volume only changes with temperature. All that means is, once a tool is purged of air, it holds on to the oil it is full of, and when you connect it up for the second time, the reserve tank doesn’t have to “give” the tool any oil. Put simply, he doesn’t need to worry about the tank over flowing, because the tools don’t drain when you disconnect them.
Very nice! Another addition to the shop coming soon.
The jaws of life would be a good build great video Colin thank you.
Hidraulic press channel will sue you... another thing Colin the electric motor in the hidraulic pump needs some more ventilation in the front air intake if you planning on using it for long periods of time.
Make a super over powered garage hose
Flow rate would be crap with a pump that small.
Really nice man. I like it a lot more then the air over hydraulic pumps nice a quiet with power.
most creative man I've ever seen
Velkum to the Colin Furze chann-ell. I'm Colin, end too-day vee are going to build a hoodrolick press for so vee can deal vith things.
Heer wee gou!
COLIN WOULD BE A GREAT SCIENCE TEACHER
he is not safe
@@RolandAshcroft not safe is fun
Watching this reminds me of when I worked in Machine Shop in High School. My class had a few different hydraulic tools that were always getting destroyed because of the way the hydraulic system for the shop was run. The shops hydraulic system was over pressuring the tools hydraulic cylinders. Usually the failure was blown gaskets, and in one case the actual cylinder ruptured, and severely injured a kid the year previous to my first year in the class. I installed a limiter valve on the system my Junior year. I figured out the issue after I had a tool blow out on me luckily it was just a gasket. talked to the Teacher about what I thought the issue was, and we ended up speaking with the schools machine shop Leiason ( our school machine shop was sponsored by a local manufacturer) who spoke to the sponsors, and got approval for the parts to install to the main hydraulic system. The limiter worked perfectly, and to this day 17 years later other than replacing tools from just age and normal wear no blow outs have happened since.
Always intriguing. Wish I had that shop.
1:17 Was there no squirrel on that tree?
You should make a Very Very fast lawnmower (fully functional) loved the vid btw
Like if u agree
Yep, Gas Turbine powered lawnmower! Yee Hah! Go Colin, there's a challenge for you.
I truly miss the insane vehicles from the early days of this channel. The worlds fastest pram. The jet powered bike. The worlds fastest mobility scooter. Collin learning about hydro-forming. Those are the greatest videos on youtube!
Oh yeah yeah
Why the hell, I see only one picture
The imagination of this man is amazing
Strangely I was not subscribed. Well done, everything, music.