Idea que Nunca Olvidaras - Pocas personas saben sobre este Truco Brillante con Sierras
HTML-код
- Опубликовано: 29 сен 2024
- Pocas personas saben sobre este Truco Brillante con Sierras Rotas
Una Herramnienta GENIAL con tus propias manos.
Idea que Nunca Olvidaras - Pocas personas saben sobre este Truco Brillante con Sierras
Autmatizamos una sierra de arco para metal y madera con un taladro inalambrico haciendo que los trabajos de cortes sean más fáciles y menos cansadores.
Отличная штука для подстрижки ногтей на ногах 👍. Обезательно сделаю 🙂
😂😂😂😂
Lets face it, it's a good way to have a bit of fun and wreck a cordless drill if you want a power saw thats slower than a manual one.
Увидев простоту устройства, захотел сделать себе такой же, но потом вспомнил, что у меня есть сабельная пила и лобзик.
Просто человеку очень скучно было 😂🤣🤣
Como ara este serrajero para trabajar con esa tembladera.De razón se bajo un dedo. Con esa sierra. Además es la primer soldadura que veo que hace corto en una herramienta sin electricidad. Si este serrajero de este video y las gracias que hizo, jamás se me olvidarán. Que Buen Reloj Despertador se consiguió.
Además que anticuado. Una segeta automática, habiendo motosierras. Eso para cortarse uno. Es que esta bueno.
Criatividade é tudo!!!!
Mas um serra tico tico seria bem mais cômodo e prático.
Mas a idéia é muito boa, é incrível como a possibilidade de poder criar algo é fascinante.
Really love how ppl still are Is creative with their own ideas of how to make things.
У Дью ещё один пациент.
У него таких уже сотни
Он сам пациент временами.
Si pues lo hecho a perder el maistro.
Wonderfull😍❤️
Hola gracias por compartir, me gusta mucho ver el desarrollo de las cosas, la idea es buena y puede ser el paso para muchas más, lo único que si consideró que se podria mejorar es el desplazamiento y mirar la forma en que solo se aplique fuerza en la dirección del corte. Un abrazo.
Gênio!!! 👏👏👏😎👏👏👏
Legal mesmo! bem criativo 😁
Pasa tiempo para los wue no tienen trabajo , pero muy bueno
easy and perfect cutting
A lot of work to make a Mikey mouse saw. There are tons of options already out in the market.
I agree with you so much why would you spend that much time and money and work when you can go by a reciprocating saw
Ok, how about places where there the "tons" of options are scarce, I admire the way people make simple inventions and use the things that have in hand!!!
Sawsall
Never trust a skinny chief and never trust a tinkerer who isn’t missing at least one finger.
Es muy buena la idea y que pasaria si en vez del taladro usamos una sierra caladora?
При работе ножовкой, нужно возвратно-поступательно двигать полотно всей длиной режущей части по заготовке, для получения более высокого результата.
На период локдауна, изготовление такого инструмента, может скрасить серые будни.
Электролобзик по цене сопоставим с шуруповертом.
Пилка по металлу для электролобзика не дороже ножовочного полотна.
Использование шуруповерта таким образом, выведет его из строя раньше заложенного производителем срока по конструктивным причинам.
Электролобзик изначально конструктивно создан для выполнения такого вида работ.
Может быть стоило бы рассмотреть вариант с использованием электролобзика?
Merci pour la vidéo
Definitivamente es más efectivo y rápido usarla a mano
las pocas personas que no sabían esto es por que tienen cosas más importantes que hacer o están viajando almorzando subiendo bajando escaleras o el ascensor o en el imalaya y hacer esa de fuera come mucho tiempo que es usado en cosas productivas
Como sempre digo:
O homem não vê nada até a pinta do nariz, mas tem outros que vão muito além
Parabéns Ninja da criatividade, que trampo maravilhoso
Parabéns
Buena idea, pero si tenés para comprarte un deWalt entonces te sobra para una caladora o sierra circular
ضيعت وقتي في مشاهدة هذا الفيديو والنتيجة مضحكة
Hay que tomarlo como un video divertido y no como una idea... En el vídeo usa la amoladora, con eso se corta el metal muchísimo más rápido
8:20 un espectaculo!
Uma serra manual transformada em elétrica desgastando uma furadeira e produzindo menos trabalho.
La idea está Super solo de superar algunos detalles gracias por ese principio basicoñ
Anyone else not surprised that this guy is missing a finger?
En mi opinión, si tienes para comprar un taladro inalámbrico deverías tener para comprar una caladora. Con la amplia variedad de precios y calidades que hay en el mercado devería salir más a cuenta que arriesgarte a un posible accidente.
WE HAVE electric jig saw sold at Bunnings.
Nao basta cer inteligenti .temos que saber usar a sabedoria dada por deus
Esta buena . pero nose si rinde jajajaj
Esa herramienta ya existe buena manera de volar se un dedo
Во первых судя по рукам, видно их похерачил, пока эту приблуду делал. А во вторых видео склейки видео при распиле материала. Что говорит о том что пилит ооооочень долго. Куча инструментов для подобных целей есть, зачем лепить горбатого?
You know they sell electric saws right 🤣🤣🤣
Jajajaja está bueno tu invento pero mejor los corto con la mano, me ahorro como el triple de tiempo jajaja xdd
If you move the whole frame instead of just the blade , that thing works good . the hacksaw uses a tight blade .😈😈😈😈😀😀😀😉
Es una hoja de sierra endeble porque no ejerse precion sobre la hoja como lo tensa
Mantab sekali
A battery saw works to!
Es más barato una moladora de mano con disco tradicional, y más rápido , está bien el ingenio pero ya está todo inventado para esos traballos
Muy interesante, y se puede aplicar en algún momento, lo felicito.
Tienes un chingo de herramientas y ¿No te pudiste comprar una sierra?😅😅😅
Caraca vei muito bom
You need a second frame and stronger springs .😀😀😀😈😈😈😉, then its good for metal cutting .😀😀😀😈
PARABÉNS LEGAL AMIGO DEUS ABENÇOE SEMPRE VOCÊ
Молодец.
Что меня больше всего удивило? "Аля ленточная пила" из говна и палок??? Или болтающиеся в разные стороны тиски??,🤔 Пожалуй незакреплённые тиски... В качестве лёгкой модификации ножовки по металлу, достаточно было остановиться на квадратах для посадки полотна. И просто натянуть на них ручку...
Con todo respeto está bien pero prefiero no perder el tiempo y mejor uso un disco delgado de corte
La ceguera al brincar no es firme el trabajo y tiende a quebrarse y despostillar los dientes
Ótima ideia, mas...ele perdeu o dedo eu em
XD no mames! se paso de lanza jajjaja
- палец, ну мужик не здаётся. Есть над чем поработать...
Cortar madera con la sierra para acero se estropea
Demaciado trabajo para tan poco resultado no vale la pena
Muy cierto. Además lo peor de este tutorial es que alienta el trabajar sin protección, a pesar de que ya sufrió un percance y la pérdida de un dedo. Desde hace mucho le quiero externar mi inquietud. La seguridad y la integridad física es primero.
@@agustinorozco5314
What's the time difference? Like how much quicker does it cut through something compared to the former, no drill attached saw?
Seguro tú lo harías mejor... Mejor déjame adivinar, tu nunca haces nada.
@@sdelmerllamodelgado5048 En realidad no creo tenga razón en lo que dice, pero le respondo a mis 98 años y haber Sido de la clase más privilegiada por la fortuna he realizado diversos tipos de trabajo desde algunos muy sencillos hasta otros dónde necesite esfuerzo físico y mental. SATISFECHA SU CURIOSUDAF?
Never trust a handyman missing a finger and has fresh bandages on his hands.
I was hoping I wasn't the only one who believes in that theory..🤙🤙
LOL! No shit!
I was sure he'd lose another in this video!
@@simonlivsey7425 Who says he didn't lose that one???
🤣🤣🤣
take it this guy never heard of a jig saw. kinda creating a tool that already exists.
Yeah but this dude got like 2 million views in one week lol. Obviously someone was interested and I was thinking the same thing but I had to watch. Plus he did it with nine fingers LOL 🤔🤣🤣
The engineer who made the Jig saw will be fired tomorrow.
Exactly a waist of time lol 😆
Lazy people invention
I find it really hard to take advice about tools from a dude with a nub... seems super safe
I was like "Why tho?" Then I saw he's missing something and it all made sense..
Ya a finger.
So was the tin man.
I wonder why... Maybe using tools like this?
Que manera de hacer web-adas. Tardas mucho menos cortando a mano que con ese artefacto ridículo. Dejen las máquinas como están ,para lo que son y más ese tipo de herramienta, re- útil y casi indispensable para trabajar y ganarse la vida hoy en día. Si no saben en qué usarla,no gasten guita al pedo.
Seriously?....it would be quicker using the saw as it was..:)
..
I would have suggested having someone else use the saw instead. This dude doesn't look like he's learned his lesson if you know what i mean.
Another you tube waste of time video, just buy a reciprocating saw ! DUH!
Crap idea waste of time watching would prefer watching paint dry
Хорошая самоделка именно после таких пальцев указательных нет😁😁😁😁
You can actually buy a thing called a reciprocating saw.
And they're a darn sight faster!
And a angle grinder but the guys making a tool for people without money probly or just being igneous u didn't with this comment
Without money but still need to buy cordless drill too 🥲
Endless you already have a cordless drill
@@Darndiddlyarn buy one with variablee speed! There's actually another trick where you can flatten the end of a hacksaw blade and it will fit in a variable speed reciprocating saw!
Доктора в студию срочно))
0iok0 .0.
Здрасьте)))
Самоделка полная хуйня. 250 полуляхов минимум.
Опередил)))
Looks like a good way to wear the teeth out in one short section of the blade at a time (noting the short stroke) while also wearing out your expensive drill and it's expensive battery. There's a whole 10 inches of blade that isn't doing anything! 😂😂
Yee totaly no point of doing this
That's what she said, lol
ruclips.net/video/Bgf-DurA1gQ/видео.html
I agree that the stroke is too short. I can see it being good if your still making the full stroke yourself but the drill makes it easier and less time consuming to cut through.
@@neisan92 Speaking of cutting through and making things short.......
Lo corto más rápido con la sierra común.. antes de todo ese invento
😂😂😂😂
Y después del invento también 🤣
SS as na as as lol lol lol lol ll
No es funcional , si cortas un metal más grueso té vas a llevar varios minutos y el taladro se va a calentar. Vi que esa solera de octavo le dio trabajo cortarla, sería más rápido a mano porque recorres toda la segueta e imprimes más fuerza y estabilidad.
Si tarda mucho incluso con la madera ,esto es porque el recorrido de subida y bajada de la seguete es muy corta apenas de 2cm a mano puedes usar toda la segue ta en el recorrido de los dientes por el material
Correcto.
Tal vez un rodamiento más grande o modificar a un tipo pistón como las máquinas de hacer tatuajes caseras
Cómo Vemos, Ya' Salen a dar su crítica negativa éstos Ingenieros. Ojalá y hallan Hecho algo Similar o más Sensillo. y No Sólo Vengan a Molestar a Quien Se Esfuerza al Intentarlo.
@@padreantonioraygozav.raygo9576 Lo cierto es que como tal no es funcional, con algunas adaptaciones se puede mejorar la idea es buena sobre todo porque da mayor estabilidad que un soso el problema que es muy muy lento para la práctica
Видео под эгидой: как сломать шуруповерт за нефиг делать.
Доктора Дью на него не хватает 👌
лучше сказать : Как потратить время и деньги, сломать шуруповерт на абсолютно не нужную вещь !!!но сама идея прикольная, но конечно не функциональная !
@@valkur52 это точно мне кажется он просто прям это увидел и уподет в истереки
Первая мысль такая-же : "шурик" долго не проживёт, и ход полотна, и скорость маловаты!!!
Назад в 10 век.
Всю эту работу я проделаю болгаркой и не буду мучать Шурика.
Мне кажется той же ножовкой вручную быстрее получится.
Да он дебил.. и про болгарку лайк
Очередной пациент доктора Дью
Коту когда нечего делать,он яйца лижет,ну а этот с пилой балывается.
@@ВладимирБелов-ф5п он случайно не этой пилой себе палец отхуярил.
Судя по отсутствию пальцев, это профессиональный диайвайщик.
He has all his finger that shot looked like he had one missing but was holding the saw steady.
😂
This is what happens when someone smokes too much weed...
This make shift tool is not practical. It doesn't have a long enough stroke. It's over stroke is only about ¾ inch on each side of what your cutting. Each tooth is about a 32th of an inch at it's base which means there's not many teeth in that ¾ inch over stroke.
That defeats the purpose of having a blade that long.
Due to the stroke length, you had to still move the saw like you were using it without that contraption.
Not to mention, I could've sawed everything you did just using a standard hacksaw and done it faster.
BACK TO THE DRAWING BOARD.
Ja ja ja, si, cuando fuman mucha hierba y no aprecian si integridad fisica.
Not to mention he just made a worse version of a saw saw
Well the old saying goes.. If its not broke , dont fix it. Lmao...still cool to see creator's ingenuity
I got high watching this video… but kudos to his imagination 🙂
El hombre ya se quitó un dedo,
Надо назвать это видео: - как ушатать шурик и сжечь пильное полотно, скиньте доктору этот видос.
Мммм хуєта
A idéia é boa, porém cortar com a serra manual é muito mas rapido e facil. Kkk
Eu pensei em usar um disco de corte na furadeira. Mas a ideia dele é engenhosa.
Big fail. 1) Cant cut straight by holding it by the drill. 2) The blade barely oscillates thus cutting with take forever 3) now we need to use 2 hands to hold a saw 🤣
A hacksaw blade is generally made to cut in one direction and putting down pressure on the blade on the backstroke actually dulls the blade when cutting steel. Nuff said.
Correct, and same with a file.
Primero es una pésima idea por que comenzará a desviar o hacerle un juego en el eje del taladro ya que va a colocar una excéntrica para que la sierra tenga un movimiento de cizalla. Para eso existen motores para hacer éste y otros tipos de proyectos, les recomiendo que no lo hagan y se de que hablo.
В принципе для развития начальных классов как бы нормально.
Ну а работать таким сбором не стоит.
That gave me an idea, I think I’ll buy an angle grinder, they’re so versatile.
Ha ha you’re on my wavelength! Although I was thinking more along the lines of I think I’m gonna go plug in my saber saw!
@@tazmun I was thinking more a sawzall😂
Then go get one. Nobody will stop you. You and "wavelength" can go off grinding in angles together!
In other words… go get f'ed, for all we care!
Jackbutt.
Судя по пальцам этому мастеру, можно верить, но не особо)))
El taladro se dañará rápido por el engranaje que sera presionado excentricamente, pues es para empujar de frente y no de lado. Ya me pasó usando el taladro como lijadora de rodillo. Interesante la idea pero no dañen el taladro. 😁👍🏻
Naahh ya sirve para presumir.. se aprecia el ingenio...
As a retired CA licensed general contractor, and patent-holding inventor, I'd say many of the negative comments make a good point or two, but no one seems to have mentioned at least one obvious, if inadvertent, advantage of your design over the original saw or an off-the-shelf reciprocating saw. Let's see if any of the naysayers can figure it out. Looks like you're a guy who perseveres in the face of challenges. And whimsically creative. Fun video.
It's actually pretty damn stable and has a large length it can actually cut and one can dial in the speed so the blade doesn't get that hot as quick could also a oiler that can move along the rail
The ability to add leverage to the full length of the blade due to the guard? The ability to use maybe the smallest amount of blade possible instead of the full length so you can choose to wear the teeth as needed?
The stroke is kinda short for the way the hacksaw is normally used.
Увидев что мастер без пальца, есть сомнения.
That’s what my brother said
Это не мастер ,,это бестолочь ютюберская ,,,
Точнее теперь понятно почему он без пальца.
Хороший фрезеровщик знает станок как свои три пальца)
Waste of time, mate, you need a women in your life
Здрассте) И сегодня мы посмотрим как быстро создать осевое биение и люфт в патроне хорошего шурика
Вместо того что бы убивать шурика, лучше бы купил сабельную пилу ;)
250полуляхов
Ну ждем обзор у доктора, хотя и так все понятно.
Говнише полное и в ручную быстрей будет распилить
What’s a shurik? What’s a shura?
Dear
A spot of oil to avoid the noise of cutting
Para es ahí cortadoras y pulidores el taladro está diseñando para otras funciones
Este señor me inpresiona con tantas ideas. Es muy ingenioso. Ya depende de cada quien si los utiliza o no.
Usted siga con las ganas de siempre. Saludos.
A ésto se le llama mente renovada y persona no egoísta. Esta idea tiene más aplicaciones. Saludos
...and this is the machine that took the beloved pointer finger!😬
Well ... maybe NOT THIS one, but definitely something like it. I'm pretty sure
Hay que ver que el taladro tiene sus rodamientos dimensionados para esfuerzos en sentido axial. En este caso, el taladro es sometido a esfuerzos totalmente radiales. Eso le va a reducir sensiblemente la vida útil.
En cada video tiene otra lesión, y hasta le falta un dedo.
No creo que esté entre sus prioridades la vida útil del rodamiento.
Talvez con un buen taladro electrico si aguante,porque este se dañara .
@@joseinocenteskohcouoh5849 no crees que es mejor un motor eléctrico?
@@orca5117 claro que sí
Mejor dale tips para su misma vida útil hahahajahaja
По рукам видно что человек хороший и с техникой безопасности у него всё в порядке.
Я чуть не блеванул от его педекюра🤦♂️🤦♂️
@@Мамкинбизнесмен-в1о Aa
ymcmb138
Не будь столь суров,дружище.В жизни всякое может быть.Банально поторопился или день был не его,звезды не так сошлись...Но ничего,делает что-то,мастерит.У меня приятель теперь почти так же выглядит.И дело даже не станке каком то.А в воротах на работе.Не знаю как правильно,они из планок,уезжают под крышу.Чёт пошло не так,и тросом.Все пальцы.Пришили,кроме указательного.. Зато я точно знаю,Доктор Дью это видео оценит. :-)
Speake in spanish
*8:40** Y vendran cosas peores dice la ......*
Вот если бы напильник закрепил, тады - :да. А ножовку, - :нет, не надо.
I don’t see this very functional, but I do really like how this guy works on his ideas. Keep working hard, you are doing great!!
i was about to say that, unnecesary, BUT he´s doing really great job, a really genius, keep on trying new project haha
Siempre siempre es mas facil comprar la maquina adecuada por eso hay de uso casero, semi industrial e industrial
La idea es poder hacerlo uno mismo así pasamos el rato y de paso se aprende e ingenia .
@@alainsotoros4025 y de paso tener un accidente... Cómo el tipo que se rebano los testículos en México por hacer este tipo de cosas.
@@alainsotoros4025es bueno ingeniar y hacer proyectos pero las herramientas y elementos de seguridad no se tocan a menos que quieras hacerte una cirugia o amputacion gratis
@@juancrazy523 si compras una herramienta especializada tambien corres riesgos.
@@orca5117 si no la sabes usar o compras marca blanco diker obvio que corres riesgos
Peligroso, la cierra no esta hecha para soportar esa velocidad, y los tornillos que utiliza para tensarla se pueden aflojar con vibración.
Nunca utilicen herramientas para algo que no estan hechas puede ser contraproducente.
This is hilarious! You can see it would be much faster by hand
Вот как раз после очередной такой поделки, палец покинул чат!
Тоже хотел схохмить про палец)))
@A B самокритично сказано.
Muito. Sem. Futuro
Muito. Sem. Futuro
Se ve la intención amigo pero no es recomendable ya que se malogra el Chuck del taladrado..Buena Suerte!
Sure. Great tool. I'll spend many hours building a makeshift tool instead of just sawing manually or buying a purpose built tool.
У него любовь к отпиливанию чего-либо,вот и играется,один раз доигрался видимо
Он уже всё отпилил,и думал:чего же ещё отпилить,и решил отпилю ка я себе палец,на левой руке он по моему лишний.
No es mala idea, pero de seguir así, nos olvidaremos de trabajar con la manos y perderemos la sensibilidad de hacerlo manual.
Tanto trabajo para que, es mejor y rinde mucho más haciéndolo en forma tradicional
Não tem Força a furadeira.
Precisa usar uma na Tomada 😂😂😂😂😂😂😂😂.
Vai serra até á