I got mine 2 days ago. Unpacked it, did the full setup and connected it. Took a total of 8 minutes from start to finish and it is controlling my Kobra 2 perfectly. The ONLY improvement I would love to see would be a separate app instead of only using a browser to control. But other than this I can't complain. I'm perfectly happy to swap SD cards between my laptop to my printer once I slice a model but this module really is a great way to do it. Now, add in an integrated wifi camera with an app to control it all and you will really have an amazing product. I'm going to test this out on my Geeetech Mizar and if it works there I'll be buying another node max.
I have the Anycubic Kobra 2 and got myself a Fiberpunk Node Max. I followed the instructions to upgrade the firmware, and managed to connect my printer. Everything seems fine, except nothing happens when I attempt to print a .gcode file. I have upgraded the Kobra 2 to the latest firmware (3.0.2). I've emailed you the above info as well. Please help!
@@hallo19841984 eben mal kurz geschaut... bekam ihn zwar im Netzwerk des Laptops verbunden, nur verlässt er ja das WLAN... Wie soll er dann die IP abrufen... werd die Tage noma testen
@@hallo19841984 Zuviel gefrickel. wer eh seperat mit nem Notebook arbeitet, dann den auch per Usb an den Drucker bringen, das Kabel dazu kostet nen Bruchteil... Dann in Cura print via USB und fertig ist die Sache...
i have try it again and must say its crap... I am not a expert in conections with IP or other things... I think there are many people do the same...I need a detail manual to connect the things. i have no idea what i do wrong... i connect it now with nothing and print over SD card... That runs and its easy...
Thanks for your feedback. Node Pro supports the use of AP mode for network configuration, and also supports the use of SD card for network configuration.please contact: support@fiber-punk.com for more help
![YoungBoy Never Broke Again - Sneaking [Official Video]](http://i.ytimg.com/vi/1ILUps2zDFU/mqdefault.jpg)
I got mine 2 days ago. Unpacked it, did the full setup and connected it. Took a total of 8 minutes from start to finish and it is controlling my Kobra 2 perfectly. The ONLY improvement I would love to see would be a separate app instead of only using a browser to control. But other than this I can't complain. I'm perfectly happy to swap SD cards between my laptop to my printer once I slice a model but this module really is a great way to do it. Now, add in an integrated wifi camera with an app to control it all and you will really have an amazing product. I'm going to test this out on my Geeetech Mizar and if it works there I'll be buying another node max.
Can i please get the file to print the holder?
Can this be done on the kobra 2 neo?
Can you give me a link to the file for the holder
Very interesting
Will this work with the Anycubic Kobra Max?
Please do a tutorial to set preheat GCode on web UI
what's the difference between this and octoprint on rpi/smc/linux/windows?
I have the Anycubic Kobra 2 and got myself a Fiberpunk Node Max.
I followed the instructions to upgrade the firmware, and managed to connect my printer. Everything seems fine, except nothing happens when I attempt to print a .gcode file.
I have upgraded the Kobra 2 to the latest firmware (3.0.2).
I've emailed you the above info as well.
Please help!
hey, have you had any issues with your kobra 2 updated to that version?
@@LuisGonzalez-hh1zq no issues. All working perfectly 👌🏼
well done. if only the computer voice knew how to pronounce KO-BRA!
its a snake from boston lol
How to use this USB Type C as it was expected?
Can I use my phone instead of a computer or laptop??
Compatible with Kobra 2 Max?
Can i do this on a kobra 1??
I have it... where i get the stl ?😊
Funktioniert es ?
@@hallo19841984 eben mal kurz geschaut... bekam ihn zwar im Netzwerk des Laptops verbunden, nur verlässt er ja das WLAN... Wie soll er dann die IP abrufen... werd die Tage noma testen
@@hallo19841984 Zuviel gefrickel. wer eh seperat mit nem Notebook arbeitet, dann den auch per Usb an den Drucker bringen, das Kabel dazu kostet nen Bruchteil... Dann in Cura print via USB und fertig ist die Sache...
i have try it again and must say its crap... I am not a expert in conections with IP or other things... I think there are many people do the same...I need a detail manual to connect the things. i have no idea what i do wrong... i connect it now with nothing and print over SD card... That runs and its easy...
Thanks for your feedback. Node Pro supports the use of AP mode for network configuration, and also supports the use of SD card for network configuration.please contact: support@fiber-punk.com for more help
Bro is using a fake iphone😂😂😂😂
kaaaabraaa 2 lol.
Where to get stl file for the holder please.
please refer this link:docs.google.com/spreadsheets/d/1pkXoGo6gDXDX6GhRvL3V94UBKY_DR0yV2ammWk8TF3E/edit?usp=sharing
266$ 🤣🤣🤣🤣