DIY Simplest Doweling Jig // Kavela Birleştirme Aparatı
HTML-код
- Опубликовано: 27 сен 2024
- Hello friends, in this video i'll be making a doweling jig with plexiglass, hard wood and steel tube. This is the simplest and most effective way to doweling. You can find the measurements at the end of the video.
Merhaba arkadaşlar, bu videoda kavela ile iki parça ahşabı birleştirmeye yarayan bir aparat yapacağım. Malzemelerin isimlerini ve ölçülerini videonun sonunda paylaştım.
Çok güzel. Çok başarılı. Tek bir tane gereksiz video yok kanalda. Her biri amatörlerin uygulayabileceği türden. Boş konuşmalara maruz kalmadan, saçma sapan müziklerin sesini kısma gereği duymadan, en önemlisi de videoyu ileri almadan izlemek keyifli 😀 Ustanın Türk olması, İngilizce-Türkçe başlıklarla kurgu yapıp dünyanın her yerinden olumlu dönüşler alması da benim için ayrı bir gurur kaynağı. Teşekkürler.
I really liked that doweling jig, i also made that kind of jig, but mine had only one hole. Thanks for sharing your video's. I noticed you have a new DIY table saw, nice.
Great simple build excellent project
Cheers
Tim from Wood 4 Nothing
зашибись))) а я всё руками да на глазок :D
Türkiye'de tek sende buluyorum bu tarz video ları devamı gelsin abi ellerine sağlık
Kazakhistandan Selamler olsun gardas!!!
Aleyküm selam, burdan da sana ve Kazakistan'a selamlar olsun gardaş :)
Very smart!! I like the way the dowels magically appeared in the holes - thank you for sharing
It is always an experience to see how you implement your great ideas so impressively and present them understandably without words.
Poly
Hello
You are realy a lovely generous man, because of sharing your good projects.
Thanks
M.Bahari
I.R Iran
Harika, elinize sağlık. En kısa, öz ve en verimli şekilde anlatıyorsunuz maşallah ilk işim bunu yapmak😁👍
Teşekkürler Hakan Bey. Size kolay gelsin :)
ustam güzel işlere imza atmışssın tebrik ediyorum.
Этот парень - гений!!! 👍
Все гениально. Спасибо!
Полезное приспособление, лайк.
Brilliant!
very practical and certainly most effective. great for picture frame,
entertaining channel, Thanks!
Simple, effective, clever.., unlike the thumbs down crew, thanks for sharing.
güzel iş, çok dikkatli. okuma yazma bilmeyen biri için özür dilerim. merhaba kazakistan.
Great idea! Make myself one. My respect to the author, a great channel!
Algo sencillo pero muy práctico gracias amigo por el video 👍😁
Simple but very accurate and affective!
I wanted to see the 45 degree joint like you showed in the intro.
Eline Emeğine sağlık başkan süper olmuş.
Teşekkürler :)
Desde México. 🤙🤙 👏👏👏👏👏👏
Tebrik ederim, hazırladığın videoları keyifli ve faydalı buluyorum.yurt dışından takip ettiğim kişiler var sen de işini iyi yapıyorsun özellikle kullandığın malzemeleri listelemen çok güzel videolarının devamını dilerim
Does "tebrik" mean " congratulations" --
or "bravo"? I speak Arabic and tebrik sounds like "mabrouk" ( congratulations).
@@adelker4884 yes, it means congratulations
İt is etimologically Arabic.Turkish has a lot of words from Arabic and Persian root تبريك
СУПЕР просто и СУПЕР удобно !
Excellent!!! Simple and very useful!!!
great job
Simple is always best! Great idea!!
Todas ferramentas o cara ajustou em gabarito pra nao fazer força....genio
Great video friend!
Just excellent. You're awesome.
You could have shown it' working aswell on an L shape to assemble angled sides of any box. Just one detail : you need one such tool for each wood thickness, but it's so easy to do it ...
Excelente propuesta. Fácil y económica de llevar a cabo. Saludos y agradecimientos desde Medellín, Colombia
Ok, RUclips Suggested. You win this round.
Brilliant! Thanks.
I would love to be able to do this but I make a mess of everything I touch but love watching clever people 😀
Thats when you copy this fellows idea & you become successful!
Sevgili Gökmen, çok güzel bir video olmuş ama eğer delikleri orta çizginin iki tarafına eşit mesafede açamazsan göründüğü kadar basit değil.O delikleri orta çizginin iki tarafına tam eşit mesafede bu aletlerle bir seferde açmak, pleksi üstünde de orta çizgiyi tam ortalamak bayağı zor bir iş. Ama becerebilen için çok pratik bir fikir. Teşekkürler.
Very cool Dowel jig. One of the better ones I have seen on RUclips. I wanted to ask you about your table saw. Have you added aluminium channels on it since I see it the last time. Or is it a newer one you have built. Thank you for sharing another great video..
Thanks. Yes, i've made some improvements and additions to my table saw.
perfeito parabéns e muita habilidade e capacidade!
Hi from 🇨🇦and ty great idea 💡 👍🏼👍🏼
Parabéns vc é simplesmente gênio
Great jig. Building one today. Why no glue in the dowel holes?
Полный разрыв, руки растут из правильного места
Amazing . Thank you again. You just save me lots a money.
simple and efficient!
harika
As usual: brilliant, simple and effective Gökmen. Thamks, rgds, Robert
Great little jig but why would you not put glue in the dowel holes and on the dowels?
I asked the same question.
Anthony Burke
I guess, from the dimensions of the test piece, it is only a show piece. Should one needs to use the tool on a proper frame, then one would expect to put adhesive. Having said this, I have a piece of expensive furniture where dowels were used to join the corners of a frame without putting adhesive. Maybe someone in the trade would leave a comment in this regard. Anyway it is a good self-explanatory video.
@@anthonygrech7001
Don't get me wrong great little jig and this is one of my favourite channels. It just surprised me to see no glue on the dowels. From my experience in 90% of Dowel failures I have seen is because of no or to little glue put on dowels . I am in the trade. I'm a carpenter.
Anthony Burke
I tend to agree completely with you. Cheers 👍.
Excelente idea
a great job
Gökmen hocam eline saglik. bütün videolarin hepsini izledim ve elimden geldigince seni izleyerek bazi parcalari yapmaya calisacagim,
fakat videolarin sonunda ölcüleri verdikten sonra bu ürünleri nerden temin ettigini de paylasirsan bomba olur.
mesela bu parcayi yaptim netten arastirdim dis 10 ic 8mm diye satilan alu boru aldim. ama 8lik asap ucu girmiyor simdi icine. :(
Perfect! About a year ago I made something similar. Only I did not attach plexglass to it. I'll do that next week. Thanks for sharing.
Nice video Friend! Thanks for sharing it with us.👍😎JP
SUPER DIY VIDEO!!! Kolay gelsin!!!
sehr schön!
Very nice and thank you! 🙂
Simples e eficaz! Obrigado pela aula!
Everything is excelent !
Muy buen proyecto. Y más cuando ves cuánto cuesta la mugre esa original.
Disculpa mi ignorancia, Para que sirve eso o que es?
this is a bright idea !
Eline sağlık...👍
Bravo! You really pulled it off.
Nice project !. Looks like a very handly jig that will get a lot of use.Thank you.
Why much people dislike this awsome video?
I didn't dislike, but I don't get what is it used for
@@polymorphicprocrastination5345 if you don't get the use of this then why you watch it?
Like!Very Good my Friend👏🏽👏🏽👏🏽🤝🏽👍🏽
Üstadım ellerinize sağlık çok pratik ve ekonomik bir ürün olmuş. Evimde ufak tefek tamirat tadilat işlerini kendim yapmayı seviyorum fakat profesyonel aletler çok pahalı ve bir kaç sefer kullanım için atıl yatırım olur. Şu an eskiden kolona denk geldii için L şeklinde sırtı olan fakat yeri değişeceği için L kısımlarını ücretini verecek olmama rağmen binbir rica ile kestirdiğim dolabımın L kısmına denk gelen minifix ve kavela yerleri de kesilmiş oldu. Minifix yeri açar mısınız diye sorduklarım uğraşamayız diye burun kıvırdılar. En azından dıştan vidalama yapmadan önce kavela bari takayım dedim ve en azından bir miktar sağlamlığı artsın diye böyle bir basit alete ihtiyacım var. Siz bu ürünü satıyor musunuz mesela satın almak istesek? Şimdiden teşekkür eder iyi çalışmalar dilerim.
Отличный кондуктор! 👍
Saludos desde Monterrey, N.L. Mexico
Really Nice!
muy bueno. felicitaciones!!!!!.
Mükemmel bir çalışma olmuş. Elinize sağlık 👍
Teşekkürler :)
This jig only works for the height size of the jig you made. You would need a seperate jig for 1", 3/4", 1/2", etc.
I figured that out as well, that is why the self centering jigs are popular
Fantastico video y funciona perfectamente
Perfect! O need It now!!
Muy bueno pero a como lo hizo si los primeros huecos quedan torcidos los muebles tambien
Çok güzel. Teşekkürler.
Bom dia. por gostei muitas as vezes fazer um ferramenta simples vale apenas fazer do que comprar coloca a mente pra funcionar abraço fica com Deus
Maravilhoso, meus parabéns e que Deus te abençoe 👍😁
Looks like I made my jig over complicated )))
Fantastic, simple and easy
Good job
Self Centering Doweling Jig Better Then This,,, Anyway Good Job.
Ustam ellerine sağlık. Çok güzel bir çalışma olmuş. Ben bu çelik boruyu nereden bulabilirim? Link atabilirsen sevinirim. Teşekkürler
Просто и эффективно. Лайк.
Класс, но у меня вариант ещё проще)
Уверена, русский мужик сделает намного проще и результат будет такой же. И инструментов столько не понадобится.
Very Good! thanks
Шикарная Вещь !
Чо он сделал? И на х?
Gracias maestro
Nice project
Flawless victory.
Kavela kullaniminin yaygin olmamasi beni çok üzüyor
@Turhan Doğan ne yazık ki değil . sadece böyle bir video yu görünce dile getirmiştim
thank you.
Really thanks, here that jig cost around 45/50€.
very very very good
Eline emeğine sağlık.Videolarına GKMN logonu yerleştirmelisin.
Teşekkürler, öneriniz doğrultusunda bundan sonra videolara logo ekleyeceğim.
Merhaba ustam delik deldiğiniz uç 8mm çaktığınız kavela 10mm mi bukadar sıkı oturuyor.
Brasil-Sao Paulo: Very good. Sensacional
Always a nice work... good job kardechim
Well done
Good technique
You my friend are the absolute bollocks m8
Love your channel man ❤
Hallo Gökmen. die Dübellehre ist einfach und gut!
Please make a video on how you made that circular saw board (reference see 1:50) thank you.