This video shows how I changed the serpentine and AC belt on the 2011 n63 x5 50i. Only removed the fan and unscrewed the turbo coolant expansion tank to access the alternator pulley.
Helpful video. One thing I didn't see: the tensioner should have an option for a 3mm pin to lock it in place so you don't need to hold tension while installing.
I did not install a new tensioner that does come with the pin. It was fast to just install the belt with the pulley bar than spend time looking for a nail to stick into the slot to hold it. If the tensioner were being replaced, then I would have definitely used the already supplied pin.
2k for my mechanic to change the ac compresser and belt and recharge the ac, the compressor is still moving but he thinks its probably stuck enough where it needs a new one etc, ugh... is it worth it to just try changing the belt? just some labor time. Whats the worst that can happen the belt squeeks and breaks again? tia
If the old belt broke because of your compressor stuck, then change the compressor. If the belt is still on and the compressor still works then there is no problem. If the belt is old and slipping or damaged, then change the belt.
Genius method no stretch belt damage
Helpful video. One thing I didn't see: the tensioner should have an option for a 3mm pin to lock it in place so you don't need to hold tension while installing.
I did not install a new tensioner that does come with the pin. It was fast to just install the belt with the pulley bar than spend time looking for a nail to stick into the slot to hold it. If the tensioner were being replaced, then I would have definitely used the already supplied pin.
@@matreyia Supplied pin ? Where is the supplied pin located?
@@ValuableShort Every new unit comes with a pin already in place. If you don't see it, then it's fake or not new.
@@matreyia I see..... so only a new part would have this pin....thanks
Good job
I'm mechanic BMW 😉
I like your vedios
Greetings from Egypt 🇪🇬
Thanks! 👍 Stay safe and healthy over there!
Thank you!
I installed the belt but now I cant get the screws to align? They did't effortlessly screw back in like they did for you. Any advice?
Where you been man? New videos ?
They comin' man! They comin!. thanks to people like you to put a fire under my feet. Cheers!
Great vid thanks, need to replace a noisy pulley or tensioner. This helped
You lost me using the t60 mm. You put it in the hole and “push it that way”? What do you mean? Do I just push side ways? do I twist? Please help
2k for my mechanic to change the ac compresser and belt and recharge the ac, the compressor is still moving but he thinks its probably stuck enough where it needs a new one etc, ugh... is it worth it to just try changing the belt? just some labor time. Whats the worst that can happen the belt squeeks and breaks again? tia
If the old belt broke because of your compressor stuck, then change the compressor. If the belt is still on and the compressor still works then there is no problem. If the belt is old and slipping or damaged, then change the belt.
Did the exact same thing ! Liked the video but now my A/C belts squeak a bit when cold engine.. any ideas?
You replaced your AC and it squeaks? That doesn't sound right at all. New belt should be dead quiet.
do you have video how to replace valve cover gasket for same vehicle?
I have not done a valve cover replacement but I bet it's pretty involved due to all the stuff that is in the way. fuel lines, injectors etc...