I kinda liked the functionality of Sensis but it was pod first and mod second. They pretty much fixed the 510 adapter problems for the release and it held in place well(unless you go around swinging with it) but the firing button wasn't the best idea and feels flimsy. I think they realised that too so that is why they went with normal button which is great. The F0 mode was decent improvement over normal wattage mode and since I use ni80 for my coils then I don't have any use for TC either way. I was waiting for them to release proper mod wit F0 I just hope they will sell just the mod and not only the kit as I have no use for the Zenith tank.
Todd thanks man it was very nice and very helpful videos thanks for yr advices..God bless.bro can you tell me how long the coil last average and the machine last if it is one n half years good for me though. Uase I want long last. Coil n device as well bro.I think it looks handsome n for use it's good.though.
I just bought the kit. I have a shed-ton of Z coils and I'll give the AC a go for the fun(?) of it. Oh..and I'll be sure to prime the coil first..*ahem*. #JusticeForTJ #RangerOfToddlington
Hi Todd! I'm buying innokin coolfire z80 mod Can you suggest me one spare coil from z series which can serve both MTL and RDL by just adjusting the air flow?
Looks like a nice mod but to change the subject is stainless Steel that much more expensive like a lot of people I'd like a resonabley well priced light weight mod that's well priced and doesn't end up scratched and tatty after a couple of months in my pocket from day to day use are there any out there I'm sure there's a big market out there but to be honest I'm no expert
Costs vary depending on the grade, you can get cheap SS and expensive Aluminium but for me the deal breaker is the finishing or the coating. You can spend a lot on materials but if they cut costs on anodising or paint then it doesn't matter how high a quality the metal was. Hope that makes sense Paul.
I see that they don't do the Coil+ mode? I don't use my Sensis in that mode but some will be gutted. I do wish they had a coil lock for people like me who like Stainless Steel wire. That said, even with my ohms changing every puff, I haven't had a nasty runaway coil temp on my Sensis. This is one MOD that I am hunting for. The Sensis isn't as much better at coil life as I had hoped, but it is better and the AC does make good flavour! AC also makes a coil whine.
There was no explanation for dropping the coil+ given and why it just went with a manual activation Adrian, sure there must be a reason or maybe just simplifying the board? I don't think you will ever see coil lock on a non temp mod, I know it is something you look for but doubt it will ever happen on these mods.
Todd fantastic review I'm really looking forward to getting this little kit Todd would you say it's a lot better than the innokin kroma-z ? Thanks again pal 👍🏻
To be honest most of the mods in this price category lack functioning TC even if they supposedly have the function. I can respect Innokin for not going that way and being real even though I am sure they could whip up some TC alike function just so they can put it in the specs.
Watched it. As much respect I have with Innokin and their history, throwing junk science and making your own laws of physics is not a good look for any vape manufacturer. Reminds me of Hohmlife "pinging" kanthal so they could claim temp control.
I'll be bringing a few of these into the shop for sure.
Thanks for the look around and thoughts Mr.Todd
“Watched it” Really like the look of the mod! Thanks for review!
Do like that Drip tip.
Your videos have come along way.
Intros are beautiful 😍
I like the. 8 Z coil but I actually bought the all black to go with my black Echo RTA, it matches and fits perfectly
Nice review Mr Todd!
I kinda liked the functionality of Sensis but it was pod first and mod second. They pretty much fixed the 510 adapter problems for the release and it held in place well(unless you go around swinging with it) but the firing button wasn't the best idea and feels flimsy. I think they realised that too so that is why they went with normal button which is great. The F0 mode was decent improvement over normal wattage mode and since I use ni80 for my coils then I don't have any use for TC either way. I was waiting for them to release proper mod wit F0 I just hope they will sell just the mod and not only the kit as I have no use for the Zenith tank.
thanks for sharing Todd... greetings from Greece
Excellent review Mr Todd!
Thanks Todd!!
Good review again Mark
Finally getting the Marscapone on the Exhale
ahahahahaha :)
That’s actually quite nice 👍
Todd thanks man it was very nice and very helpful videos thanks for yr advices..God bless.bro can you tell me how long the coil last average and the machine last if it is one n half years good for me though. Uase I want long last. Coil n device as well bro.I think it looks handsome n for use it's good.though.
As always, depends on juice and how much you vape but I would budget for at least one coil a week :)
I just bought the kit. I have a shed-ton of Z coils and I'll give the AC a go for the fun(?) of it. Oh..and I'll be sure to prime the coil first..*ahem*. #JusticeForTJ #RangerOfToddlington
#ihateyou #illprimeyou 🤣
Hi Todd!
I'm buying innokin coolfire z80 mod
Can you suggest me one spare coil from z series which can serve both MTL and RDL by just adjusting the air flow?
Hi, I’m new. Q? Can this be used as a battery for cann or cbd oil cartridge? should this be the best? Or which one?
Looks good but may I ask what ratio liquid did you try it with?
50/50 and 70/30, heavy on the VG. Both worked with the MTL coil Gary.
Hi mate! I have just bought this as my first vape. Can I use 50/50 liquids with the 0.8ohm coil? Cheers 🏴
Yes you can :)
good review!
PERFECT!
Looks like a nice mod but to change the subject is stainless Steel that much more expensive like a lot of people I'd like a resonabley well priced light weight mod that's well priced and doesn't end up scratched and tatty after a couple of months in my pocket from day to day use are there any out there I'm sure there's a big market out there but to be honest I'm no expert
Costs vary depending on the grade, you can get cheap SS and expensive Aluminium but for me the deal breaker is the finishing or the coating. You can spend a lot on materials but if they cut costs on anodising or paint then it doesn't matter how high a quality the metal was. Hope that makes sense Paul.
@@ToddsReviews thank you for the reply I'm suprized you haven't designed a mod yet have a good weekend 👍👍👍
When did subohm coils become MTL? :-/
years ago, keep up at the back ;)
Watching it watched it.
I like it!
I see that they don't do the Coil+ mode? I don't use my Sensis in that mode but some will be gutted. I do wish they had a coil lock for people like me who like Stainless Steel wire. That said, even with my ohms changing every puff, I haven't had a nasty runaway coil temp on my Sensis. This is one MOD that I am hunting for. The Sensis isn't as much better at coil life as I had hoped, but it is better and the AC does make good flavour! AC also makes a coil whine.
There was no explanation for dropping the coil+ given and why it just went with a manual activation Adrian, sure there must be a reason or maybe just simplifying the board?
I don't think you will ever see coil lock on a non temp mod, I know it is something you look for but doubt it will ever happen on these mods.
@@ToddsReviews Thank You 👍 Most VW don't constantly update their ohm reading though.
So Phil and Dimi made a device that can shake my coil... Not to be nitpicky but those two are not the reviewers I want to shake my coil :P
Todd fantastic review I'm really looking forward to getting this little kit Todd would you say it's a lot better than the innokin kroma-z ? Thanks again pal 👍🏻
Kroma Z is great, if you fancy the new technology then yes give it a go but otherwise stick with the Kroma, Zenith II is worth an upgrade though.
@@ToddsReviews got a quick question for you do you know when i can buy this little kit from Amazon ???? Thanks again pal 👍🏻
Shame that it lacks temp control
To be honest most of the mods in this price category lack functioning TC even if they supposedly have the function. I can respect Innokin for not going that way and being real even though I am sure they could whip up some TC alike function just so they can put it in the specs.
Watched it. As much respect I have with Innokin and their history, throwing junk science and making your own laws of physics is not a good look for any vape manufacturer. Reminds me of Hohmlife "pinging" kanthal so they could claim temp control.
👍
Watched it! Or did I...? 😏
Watched it😂