If my head unit isn’t in its original state, can I still code this? If so, how? I coded my CarPlay to fullscreen using another program other than BimmerCode so I can’t use BimmerCode to code anything involving my head unit.
Hi there! Question, does the battery level indicator work on a G30 520d or does it have to be a hybrid? I think you´re driving a G12 e-drive Hybrid, right?Thanks for your answer. greets
Thank very much for your video. I tried to code my Mini Countryman with Harman Kardon speakers 674 following your instructions, but I don’t know why but although I see all the options Bowers & Wilkins tone I can not select any of the tone profiles like Loung or Concert. On the other hand, when I select Bang & Olufsen menu, I can not select any of the the two options either. Could you help me out? Thanks a lot!!!
@@myron302 hi! it does not work in my car either...i have just the selection 676, so it is the hifi-system set...B&W is set how you did, and the logic7 "logo" is set to on...could you be so kind and explain whole procedure once again? what if i choose a hifi-system that is not really physically built in? what could happen? i do not want to get any troubles with the system...but a few sound stage settings could be nice...best regards
@@renePHTR Its been a while but i am pretty sure you cant have logic 7 enabled at the same time. Try it without logic 7. Also play around with it, try different combinations. You cant hurt the car. You can always revert to a back up if you dont like what you see. If you dont have the equipment in most cases it will not let you enable the feature however if it does, you will still not hurt anything. Ultimately it just will not work for that feature is the worst case.
What up doh big homie . I was on bimmercode and it shut my audio sound off completely but everything turns on like FM and AM radio on the screen ,music on my iphone comes up on the screen but absolutely no audio coming from the speakers . Do you know how to fix what i did wrong? Thanks
Yeah hahaha 100 bucks I’ll tell you hahaha . Nah what you have to do is thank god for bimmercode to backup everything we coded .All I did was just to go back into every single control unit I coded from the day the audio went out and eventually you will code it back to normal. Most likely it was in your headunit that you coded some speakers you don’t have installed or you tried the good ol expert mode .. but I could be wrong. I would back track and press that backup button on the bottom right corner of bimmercode and eventually you’ll get there 👍✌️
Hello friend. I have 2012 f20 with basic sound. I added focal speakers and tweeters (i have no amp) will this still work for me or its a waste of time?
@@alexgrin6869 bimmercode website will have a list of options but there are forums for your car. I would start there. You can find plenty of cool options unlisted on bimmercode then you we can figure out how to make those options work for you. The fact that you dont have a lot of digital interfaces make the obvious stuff unattainable but there are some other features available for sure. I wouldnt give up by no means
At 4:29 Minutes where it shows connectdrive gas symbol. Was wondering if you coded it in bimmercode? Or did you come with your package for the car? I have the ID5 running on Id6 lite. With head unit NBTEVO professional. Also package S688A Harman/Kardon Surround Sound system in a 430i xdrive. I think that gas pump symbol is cool looking. Was wondering if it was code a bowl
@@adamroberts2525 Ahhh so that's part of the connected drive subscription which is overprices useless extras. None the less you would at this point need an 2018 of higher to even subscribe as they discontinued it for the 2016 model at the time and possibly the 2017 at this point but dont quote me on the 2017. If its something you must have go here and see if your car is eligible www.bmwusa.com/explore/connecteddrive.html
Can you show and explain to us what the sport plus and ecoplus plus can do if there’re any change and the Msetup what are they all about trying not to have menus or options that will not change the behave and or look of the vehicle making them pointless to be added? Thanks Liking your videos I just got a 750i loving it
Watch the odometer when you press it in to eco plus. You will notice it changes the max speed from 60 to 80MPH. That's just one of the features. When you are in pro or any mode the transmission, engine, steering and dampening changes respectively. You previously knew those menus as just sports, comfort and eco with comfort plus already being enable. Now you can select thru the different modes and customize each individually to use the plus mode settings, which definitely have more aggressive power and handling. By watching my videos you have probably realized that most stuff we code dont work unless turned on in the corresponding system. For example; some things we code in the headunit are just there inoperable until we turn the same settings on in the body domain controller. As for M setup, you cant use it with the other modes active, sports, eco etc. It disables these two modes and will not let you select anything other than the comfort mode. I will post the video on how to get the M setup with all the modes working together soon.
Also FYI Sports plus automatically set to the DSC, drivetrain and suspension settings in their sport positions. As mentioned you can stiffen or soften the suspension or change each setting to what feels right for you.
@@myron302 Yes! This morning driving to work I did see the diference between all the modes awesome ! Sport plus does increase RPM the car gets even more Touchy than sport. Eco pro shuts off some of the comfort stuff like my heated seats etc. I’m still learning and it’s hard to find people doing stuff to their 7series vehicles. I’ll be waiting for more videos.. Thanks again
Hi I'm interestet to code the sound system.But from the video I do not see and do not understand what exactly you choice ,What options. there is much confusion. Can you explain step by step pls
Hey bro what is the "M Setup" at 0:26 did you code that? And can you show me, how to code sidemarkers on?
BATTERY CONTROL should not be coded for normal car. This function is only for eBMW.
Thanks this is what I was looking for
Super info just done mine,
If my head unit isn’t in its original state, can I still code this? If so, how? I coded my CarPlay to fullscreen using another program other than BimmerCode so I can’t use BimmerCode to code anything involving my head unit.
Undo, your carplay, code what you need using Bimmercode and the recode your carplay back on again
@@bongz76photography45 I would undo the code but I'm not sure how. I bought the code off of ebay. Do you have any experience with this?
Yo How do u change the ventilation speed on the seats? The OEM is so weak…
Just bought official bimmercode from app store and i have very few selection items. Can't find the menus on the video. Any suggestion?
@@AfXv237 which car u have and which menus are missing?
Thank you for this
Hi mate
Any chance you could share how to code on G11/12 instrument cluster to have MSport animation?
Ist it correct If i have a G20 with Hifi Audio i can codeing the Harman kardon or the bang and olefso. To get the Equalizer and use it?
Hello, i have the HI-FI system in my 2018 G30, will this work for me? Many thanks !
Battery control is only for the plug-in hybrids, does absolutely nothing on the non-‘e’ cars
What’s the m setup on your idrive?
Hi there! Question, does the battery level indicator work on a G30 520d or does it have to be a hybrid? I think you´re driving a G12 e-drive Hybrid, right?Thanks for your answer. greets
I have regular g12 not hybrid
Thank very much for your video. I tried to code my Mini Countryman with Harman Kardon speakers 674 following your instructions, but I don’t know why but although I see all the options Bowers & Wilkins tone I can not select any of the tone profiles like Loung or Concert. On the other hand, when I select Bang & Olufsen menu, I can not select any of the the two options either. Could you help me out? Thanks a lot!!!
Did you turn on logic 7?
@@myron302 hi! it does not work in my car either...i have just the selection 676, so it is the hifi-system set...B&W is set how you did, and the logic7 "logo" is set to on...could you be so kind and explain whole procedure once again? what if i choose a hifi-system that is not really physically built in? what could happen? i do not want to get any troubles with the system...but a few sound stage settings could be nice...best regards
@@renePHTR Its been a while but i am pretty sure you cant have logic 7 enabled at the same time. Try it without logic 7. Also play around with it, try different combinations. You cant hurt the car. You can always revert to a back up if you dont like what you see. If you dont have the equipment in most cases it will not let you enable the feature however if it does, you will still not hurt anything. Ultimately it just will not work for that feature is the worst case.
@Shye My I need help bro, can I text u on that number u got up?
@@jqahir 7186698768
What up doh big homie . I was on bimmercode and it shut my audio sound off completely but everything turns on like FM and AM radio on the screen ,music on my iphone comes up on the screen but absolutely no audio coming from the speakers . Do you know how to fix what i did wrong? Thanks
Do you fixed?? I have the same problem 😕
Thanks
Yeah hahaha 100 bucks I’ll tell you hahaha . Nah what you have to do is thank god for bimmercode to backup everything we coded .All I did was just to go back into every single control unit I coded from the day the audio went out and eventually you will code it back to normal. Most likely it was in your headunit that you coded some speakers you don’t have installed or you tried the good ol expert mode .. but I could be wrong. I would back track and press that backup button on the bottom right corner of bimmercode and eventually you’ll get there 👍✌️
#Dictador did it work
Hello friend. I have 2012 f20 with basic sound. I added focal speakers and tweeters (i have no amp) will this still work for me or its a waste of time?
Pre 2016 is very limited in the what can be done
@@myron302 i understand. Thanks for reply
@@alexgrin6869 bimmercode website will have a list of options but there are forums for your car. I would start there. You can find plenty of cool options unlisted on bimmercode then you we can figure out how to make those options work for you. The fact that you dont have a lot of digital interfaces make the obvious stuff unattainable but there are some other features available for sure. I wouldnt give up by no means
@@myron302 I've been trying to figure out how to get the M setup in the My Vehicle menu.Can any one enlighten me on this?
@@JohnnyRingo069 M- is not for this vehicle. You would need a M button in your car
Hi there
Can i code comfort seat and seat ventilation with bimmercode?
Yes you can
@@myron302
Thanks for your reply
@@myron302 can you tell me how pls
Hey how did you code the gas tank animation in your Idrive bro
which part of the video. I don't remember that. Which minute mark of the video?
At 4:29 Minutes where it shows connectdrive gas symbol. Was wondering if you coded it in bimmercode? Or did you come with your package for the car? I have the ID5 running on Id6 lite. With head unit
NBTEVO professional. Also package S688A Harman/Kardon Surround Sound system in a 430i xdrive. I think that gas pump symbol is cool looking. Was wondering if it was code a bowl
@@adamroberts2525 Ahhh so that's part of the connected drive subscription which is overprices useless extras. None the less you would at this point need an 2018 of higher to even subscribe as they discontinued it for the 2016 model at the time and possibly the 2017 at this point but dont quote me on the 2017. If its something you must have go here and see if your car is eligible www.bmwusa.com/explore/connecteddrive.html
Okay thanks for messaging me back to let me know.
Can you show and explain to us what the sport plus and ecoplus plus can do if there’re any change and the Msetup what are they all about trying not to have menus or options that will not change the behave and or look of the vehicle making them pointless to be added?
Thanks
Liking your videos
I just got a 750i loving it
Watch the odometer when you press it in to eco plus. You will notice it changes the max speed from 60 to 80MPH. That's just one of the features. When you are in pro or any mode the transmission, engine, steering and dampening changes respectively. You previously knew those menus as just sports, comfort and eco with comfort plus already being enable. Now you can select thru the different modes and customize each individually to use the plus mode settings, which definitely have more aggressive power and handling. By watching my videos you have probably realized that most stuff we code dont work unless turned on in the corresponding system. For example; some things we code in the headunit are just there inoperable until we turn the same settings on in the body domain controller. As for M setup, you cant use it with the other modes active, sports, eco etc. It disables these two modes and will not let you select anything other than the comfort mode. I will post the video on how to get the M setup with all the modes working together soon.
Also FYI Sports plus automatically set to the DSC, drivetrain and suspension settings in their sport positions. As mentioned you can stiffen or soften the suspension or change each setting to what feels right for you.
@@myron302
Yes! This morning driving to work I did see the diference between all the modes awesome !
Sport plus does increase RPM the car gets even more Touchy than sport.
Eco pro shuts off some of the comfort stuff like my heated seats etc.
I’m still learning and it’s hard to find people doing stuff to their 7series vehicles.
I’ll be waiting for more videos..
Thanks again
@@yurisantos5099 In your eco individual you can adjust some of the settings. The heated seats can be coded in bimmercode for any mode.
@@myron302 damping and steering doesn’t go to sport plus I might of missed something!
Will work 2021 G30 standard sound system?
Nope 🙅🏻
Hi I'm interestet to code the sound system.But from the video I do not see and do not understand what exactly you choice ,What options.
there is much confusion.
Can you explain step by step pls
Text me @6318308228
@@myron302 are you have whatsupp?
Is the contact number correct because is this @ on the beginning.
Pls
@@MrNikoA4 no just text or normal.
@@myron302 @631 ??
Bro I'm from Uk.
Just give me correct contact pls.This @ should be not with the number
@@MrNikoA4 disregard the at symbol it just means text me at that number. What part are u having issues with? Which part don't you see?
Bro my Bluetooth on my iPhone don’t work but on android devices it work why ?
What car do you have?
Bmw f30
come tornare indietro dal display alpine al originale in modalità esperto con bimmercode grazie fra
Is it possible in f36?
most of the stuff is unless you have it standard. newer cars typically have a better sound system new model.
Remote won't close the trunk
any codes for screen mirroring
Can only be done with an android.
Idk what I did my speakers sound like shit bro, I got a 18 m550i
use a headset instead