Get 100% better sound from your factory BMW audio system using an app
HTML-код
- Опубликовано: 26 авг 2024
- Hey everyone! In this tutorial I will show you how to upgrade your factory BMW audio system using just Bimmer code! This works for Hifi and Harmon Kardon equipped cars by adding the Bowers and Wilkins sound profile. This does not work for the B&W system. This has helped tons of people out there and I hope it helps you too!
Follow me on IG, TikTok, and Facebook for weekly updates and to see what I'm up to!
IG: / limitless.m5
TikTok : / _b58jason
Facebook: www.facebook.c...
I finally did this. And then I didn’t realize you need to go into my vehicle and adjust the second bowers eq in there as well as the one in media. I only did media and was wondering why it didn’t sound different at all. Then one I found the one under my vehicle and turned the bass up. Holy shit. Hifi system is now plenty for me.
Sick!
I also did this upgrade to my 2018 120i, but I am unable to select the “expanded” setting on the b&o equalizer… also i can not change the sound mode from studio to other sounde mode. What could be the reason? I have Hi-Fi system.
@@drancyneuftrois3120hey it will change but after you click it you may have to wait 45 seconds to a minute. At least on my car!
@@drancyneuftrois3120 u fixed on 120i hifi?
If you want to get even better sound do the following in addition to your coding: head unit> Expert mode> audio system > change it from hifi to individual sound. You are going to get even more improved sound stage and it will sound more surround feeling.. im an audiophile and pretty satisfied. Only additional upgrade im going to do is replacing subs for better lows.
Good tip
What subs you gonna get? You gonna replace the factory ones under the front seats? What you think about Earthquake? I put them in my F10 and they were pretty good.
@@ndnplaya1222 any aftermarket sub will sound better than factory unit.
After expert mode I don t see “audio system” what is de code number that you have to see?
When I did this, I lost the audio. Do you have any idea why?
just did this today on my 2018 230i with HiFi and could instantly tell the audio sounds more full and with deeper depth, thanks so much for posting man
U did exactly like in video? I plan to do on my 118i 2019 with HIFi also
@@ozanazis5685 Yes but I undid it and followed what Muhammed in this comment section posted. I set mine to Premium instead of Individual though. It sounds the same as this B&W setting but it doesn't give you the extra menus
But you have to be careful because it changes the filtersettings of the speakers, so there is the possibility to damage your speakers because they are too weak
You saved me about 2000 dollars as I was about to go to a hifi shop and get a full upgrade on everything. The sound is so incredibly horrible coming from the factory. My F10 had a way better sound output without having to do these shenanigans. What were they thinking?
Thanks mate
Love it. Yeah the factory settings are crap. F10 B&O had a strong sound comparatively.
First!!!! Keep up the hard work. Not to many g30 guys on RUclips
for real its hard to find good videos specifically for the g30
Appreciate it!!
Did this in my 18 540 layer the day I turned my car off and the head unit was extremely hot and had a blower motor running that wouldn’t turn off behind the head unit even after car was fully off sounded like the motor was trying to cool something off so I coded it out and fixed it
Never heard of that!
Does this also work for the G20 with HiFi System SA676?
Should work
Thanks for sharing, I appreciate the time and effort that goes into these things.
I will give this a try.
I previously had “base audio” or “stereo” with this car, so that meant no front door sail tweeters, just front mids, no front centre and no rear door speakers, just rear shelf mids.
I installed an aftermarket set up (audiotech-fischer match) so now have front tweeters and rear shelf coaxials, a DSP / amp where there was none before. Also upgraded underseat subs.
A real improvement, but will see if this improves it any further.
Just a little curious as to why it says Bang & Olufsen there?
Because I’ve coded the sound profile for the B&O sound system but it somewhat works on HK sound systems when coded
@@limitless.M5 The B&O appears on mines too.
I have no function with either though, if I try to change from studio, nothing happens.
This method Working perfect also for X5 F15 2017 hybrid 4.0 e, thnx👍👏
You are an absolute star 🌟 Thank you
How did you make it so ambient lighting cycles?
Look at my channel have a video on it
Hi there i got a 520i 2019
And i got basic speakers is very poor and low volume it’s really bad
Can that work for my car as well?
On F series i can not find the Audio_Menue but also have the hifi system and i´ll giv eit a try
Update if it works
Is there a way you can do this on a bmw business radio unit without the fancy screen and everything?
What car
@@limitless.M5 2013 bmw e92 328xi
Thanks very much! So helpful.
I have Harmon kardon with this code it sounds louder to me but it doesn’t sound like surround sound. Does anyone else hear it this way?
Just tried this today on my 2020 g20. Menu was slightly different and the Bowers and Wilkerson does not show up on the volume display when adjusting the volume but it seems to work. I will run it for a couple of days to verify…could be placebo because I want it to work so badly lol. EQ and extra sound profiles are now active. Agree that the sound system in BMWs is by far the most disappointing part of these otherwise great cars.
There might be an option somewhere in idrive to have volume bar pop up or not when adjusting.
Hey man, love the vids. How did you get the ambient lighting to go RGB mode?
I’ve got a video on it check it out
I coded this in, I have upgraded to harman kardon. How come I cannot select the sound profiles?
Not sure why it worked for me
Same for me bro. I cannot change it to “expanded” mode. Also cannot select other sound profiles like Concert or Studio for example.. Have you been able to find the problem?
Great video, going to buy BimmerCode. I ungraded my HiFi system to HK(so speakers and amp), except the 2 bass boxes below the seats in my m140i.
Now I do have a white noise coming from the speakers. Is there anything i can do with bimmercode to get rid of the white noise?
Thanks 🙏
Coding might fix that once you code in premium audio
thx , i code this BO and code Hifi to Individual sound in my f10
Nice
Hello!
What OBD you are using? I have a F30 and I want bimmercode to.
Enet cable
At the miles you are at, how is the car holding up? I am going to be purchasing a 2017 540i with 75k on the clock.
It’s held up great to this point, wouldn’t be afraid to get a higher mileage b58
Wont this be bad for your standard amplifier if you use hifi? I wanted to do this myself because i saw OBD11 was offering it, but was a bit scared to destroy amplifier when read it coudl damage it because of being to much for the amplifier?
Never had any issues with it
Nice video. Would you happen to know the module / PID to the Harman Kardon booster amp for a G30 5 series? I replaced this amp with another identical one and need to activate it, but I am not finding access to such an area.
Sorry I’m not sure how to help with that.
No problem appreciate the response. I’ll continue to hunt for it🤞
How do I get the "volume settings"? Don't show up in my G31 2017. I want to make the PDC more silent
I’m not sure exactly
Just got my car today and i have to learn so much about lot different from my e36 I’m so blessed thanks for the help
Congrats!
is there anyway to code the f90 m5 heads-up display with rpms and shifts, g30 only has speed limit and how fast ur going
If your g30 has id7 then yes you can code it in. If you’re id6 then you would need m5 cluster
Will it work with f30 hi=fi?
Idkk but it should
I tried it on my 2019 530e with hifi and there was no sound anymore...
That’s weird! Check steps again
Yo I played Carnival by kanye west and I think the rumbling fucked with my bass coz I have no more bass. Am I fucked?
That’s crazy lol, maybe. No sound? Maybe the amp for it went out.
@@limitless.M5 it fixed itself over night lol
@@blakewright3589 that wouldve been a good song to blow your speakers with 😂
anyone know if there is a way to get your tone profile to save? concert sounds a lot better than studio to me but it resets anytime I turn the car off. will upgrade my amp soon either way though
It should be attached to your driver profile. Setup driver profile in idrive
I have a g30 530i. Can i code something to get a better exhaust sound. I opened the right exhaust via bimmerlink but maybe there are more options?
Thanks for that great contend.
Greetings from Germany
Unfortunately not
To get a better exhaust sound you can get M550i )))
@Jason Drives I have a G30 pre LCI 530e and that's all I have HEADUNIT -> 3000 High_End_Audio_B_&_W but I don't have High_End_Audio_Menue. Could You help with this? 😔
Should be there. I am not sure why it would be missing if you have same head unit as mine
No difference with HK on G30. Mayhe only noticabke difference on HiFi
Correct. I think I stated that in the video lol
@@limitless.M5 nah bro u said hifi or HK sound system 😂
what application dl you uze?
Bimmercode
will this app work with a 2024 430i HI FI system?
Maybe, no car for me to test
Brother what obd dongle do i need? I downloaded bimmercode but i dont know what dongle i need
Obd to rj45 Ethernet
why ur ambient light color are keep changing automatically? Can do the coding?
Yes my video is uploaded on it
????
Coded, the two new menus are there but I can’t select any of the profiles, any fix?
No it’s laggy there but it works
Umm, still cannot pick any. But I’d keep them just for show-off lol!
Just bought a 19 m550i, im getting the “emergency call malfunction” message. And I can’t clear it. Will bimmercode/bimmerlink clear it?
use bimmerlink
Change the BMW SOS BATTERY 🔋 FIXED MINE WITH IT.
How did you get screen mirroring on your g30? Is it coded or do I need to buy something for it
U need a Samsung to miracast
Or Apple CarPlay you need a Fsc code to activate the coding for it
Can you make a video on how to add screen mirroring ?
No Android?
You said this works with hifi as well? I’ve heard it’s not a good idea to do this with hifi as the system is very weak
if your speakers in good shape it shouldnt be a problem
Have you tried changing ur amplifier? Heard it does a good difference
No I plan to though
Can you activate brake force display(flashing brakes) on a g30?
Yeah I have it activated
@@limitless.M5Through bimmercode? If so, could you show us how to do it?
So in my 530d I installed the harmal kardon at the factory. And what can I say, it's just horrible. especially when you look at the price of what it was supposed to have cost new. I'll soon be throwing out the speakers and installing the Musway system including a DSP
Will this work in a 2020 x3 G01?
It should
@@limitless.M5 it didn’t actually. The sound profiles are not showing. I can only see if two of the three coding options. Can’t tell if the sound has improved.
do you have a video on how to get the coding app and what not?
Just get BimmerCode from the App Store simple
Do you guys know how I can increase the volume button sensitivity on the steering wheel?
Idk
Yeah, I'm not gonna do that... Factory hifi uses an analog amp in the trunk and it uses the speaker wires as balanced low level outputs that feed the amp. Bowers and Wilkins uses a digital amp in the trunk and it's connected through MOST. When coded to B&W the speaker wires revert from balanced low level output to speaker level so you're basically feeding the factory amp too much voltage and you will fry the thing after some time. Also none of the extra tone settings work properly since with B&W these happen in the B&W amp in the trunk, not in the head-unit. So all you get is a useless interface and an amp that's getting too much power when doing this. Also for some reason you get a Bowers & Wilkins tone interface that says "Bang & Olufsen", the high end audio system in previous generation cars so you immediately notice something iffy is going on here. It's a hard pass, thank you...
Yeah that's not how it works. People have been running this coding change for years and have not had any issues. If you have proof, with a multimeter, that the voltage changes, by all means bring it up. But voltage isn't necessarily a factor on amps sucking more power, thats actually amps, which doesn't affect a system as they only draw amps as necessary. All amps and most car modules, run on a voltage RANGE not a meticulously static voltage. That is by DESIGN, becauses batteries and alternators go up and down on voltages continuously at all times.
@@VictorEstrada It switches the speaker wires on the back of the head-unit between low-level (let's call it RCA output level for sake of ease) to high level (speaker level) when you code it from analog Hifi to either anything digital (HK, B&O, B&W) or base audio. Only when coded to Hifi, the speaker wires output a balanced low level signal that's used by the amp in the trunk. All the other options output a speaker level signal to those wires. So you are feeding an analog amp that expects RCA inputs speaker level inputs. When you do it with HK nothing serious will happen since both are digital over MOST but doing it with a Hifi amp wil overload the amps inputs. BTW, I'm not talking about the power delivery to the amp, that's something completely different...
@@Bimmerstye1 I highly doubt that's the case, no one does that. If that were the case, giving it it a bit of volume would ma, it out and also make it sound like crap, to the point where people would switch it back, and advice everyone not to do it, but that is not the case. It sounds just fine, and all it changes is the tunning, and that may include a slight increase in volume, which is normal. Also, not sure where you get your info from, I had the regular basic audio on my old X5 E70, and that still ran through MOST. I ended up using the speaker level output from the factory amp in the back through a harness, and then used a AudioControl LC2i to bring it down.
@@VictorEstrada When you consult a BMW wiring diagram you will see that base audio runs speaker level out of the head unit directly to the speakers without use of an external amp. Hifi (base in the US) consists of an analog amp through balanced outputs from the headunit over the speaker wires. All the others run through MOST to the amp, yet when coded to any of those the unused speaker outputs will revert to speaker level. This has been the case for any BMW ever since the E65 up to the models with RAM module from around 2020. MOST however is connected to the head-unit in all cases but on base or hifi it's only used for communication with the rest of the car, not for feeding the amp...
@@Bimmerstye1 if it were true, then how come people have gotten away with it and have better sound? That also wasn't the case with my '13 e70, it had no HK, and it had a MOST amp, that I just wired a 3 way harness to for my subwoofer.