2015 CRF250R Showa SFF-Air TAC Fork

Factory Connection’s Research & Development department discusses the Showa SFF- Air TAC forks. In this video you will learn more about the 2015 CRF250R version. Factory Connection is ready to Revalve and personalize valving settings for any rider.

[@TeamHMhonda]

This fork works very well

[@brockbentley773]

If my suspension feels very hard throughout the entire stroke,will adding more or less air make it feel more consistent and use more of the travel?2015 crf 250 r

[@KingOfCults]

How much oil goes into the inner chamber on the right fork, can’t find the information anywhere.

[@FactoryConnection]

350cc is the STD outer Chamber oil amount. The inner chamber is a self bleed system as you bleed the cartridge rod the excess oil will come out of the bleed holes in the subtank.

[@nonyabusiness5250]

Hi,
Got the 2017 crf250r tac fork, i noticed that the rebound damping adjuster doesn't seem to do much in terms of rebound damping and can't feel much difference when the clicker is all the way in and all the way out, when the fork is off the bike. Is this normal? If not what could be the issue?
Any help would be much appreciated

[@FactoryConnection]

That is not out of the ordinary for that stock fork. We have some very nice performance modifications to each valving circuit and tailored to your needs will improve performance and will generally provide you with adjustment range that is more response than in the standard configuration.

[@nonyabusiness5250]

@@FactoryConnectionthat's a releif to here, it's normal. Ill check out the website and have a look. Thanks very much for getting back to me :)

[@nonyabusiness5250]

@@FactoryConnection another question if i may, should the damping side stantion fully extend once released from compressing it, it does when the axle holder is facing the floor, but when held horizontally it stops about 1 inch from fully extended position

[@Rayzer1989]

Hey lads, can you please tell me on the left hand side fork on top the outer chamber cap thread size is? I brought fork bleeders for this model but they are both the same thread and both fork bleeders only fit the right hand side fork bleed cap.

[@FactoryConnection]

Left air bleeder is 8mm x 9mm thread length 1.0 pitch thread

[@f4safety]

Where you guys located?

[@FactoryConnection]

We have 6 company owned/operated locations: NH, PA, FL, OR, OK, CA .. give us a call 603-664-2221

[@270raptor]

Why not say the air pressure??

[@boazgerhart2315]

What the tool called for the left fork Bc I can’t undo the bottom I have all the seals and all but I have no idea what the tools called I would really appreciate it if anyone knows it’s like a inverted Allen or hex but I don’t know where to buy it

[@BenToneryk]

I’m having this same issue, did you find a awnser? Thanks

[@john6276]

These forks suck. 2015 crf450r. 6 months after new purchase.....leaking. I'm an old man and I ride like one, too...no abuse. None. Garbage shocks. Run away.

[@YRZZv27]

Can anyone help me with the setup for this fork i recently bought a crf 250r 2015 and I'm really not getting on with the standard settings. Im 150 pounds intermediate rider and am really struggling to find the right set up, please help

[@FactoryConnection]

YRZZv27 We'd be happy to help. Best bet is to give us a call at 1-800-221-7560. We can provide some settings that will help with the stock suspension and we can give you some information on a Revalve if that's what you're interested in.

[@YRZZv27]

Do you have a email?

[@FactoryConnection]

[e-mail]

[@levidolan5518]

.

[@MrMotesito]

Any one can help me??? need a parts of left showa 2015 from my new Suzuki 450 2015.
I don't want buy a new left bar only need internal cylinder of rebound...fact defect in the nut.

[@FactoryConnection]

MrMotesito sir we may be able to help you. Can you contact us via phone or email? You can access our contact information from our website www.factoryconnection.com

[@levidolan5518]

.