HB-1001/Trx4/Comparison
HTML-код
- Опубликовано: 15 сен 2024
- This is a comparison video of the HB-1001 Wilderness to the Traxxas Trx4,
Just found this amazing item on AliExpress. Check it out!
$6.42 | Heavy Brass Counterweight Portal Drive Housing Axle Mount Knuckles for TRX4 1/10 HB R1001 R1002 R1003 RC Crawler Upgrade Parts
a.aliexpress.c...
Just found this amazing item on AliExpress. Check it out!
$28.90 | Grc G2 Ackermann Metal Axle Housing & Portal Drive Housing Set #casting For Traxxas Trx4 Defender G500 Bronco Blazer #gax0121bfb
a.aliexpress.c...
I tried to keep as much stock as I could. I didn't replace the whole center transmission skid, just some metal trx4 skid protection, they fit no problem. Trx4 bronco grill did not fit without some customizing. Also trx4 interior didn't fit without lots of cutting. Trx4 shock extensions didn't fit. Had to put a chunk of silicone under the motor to prevent wiggling. You can carefully score the windows tint and peel it off to view the interior. Such a good deal for this thing at $155
@@keldonator yes I'm seeing the Traxxas bronco has a longer wheelbase at 324 that possibly might be why the interior 🤔 is off then. I'm not worried about interior for this just keeping it simple I only use interiors in my hardbodies for scale stuff. Thanks again for the information. I agree I still think this is a value for the price 🤔 👌 👍
Interesting video,,, nice pretty good. I really like to watch this one. This is good as the leaf,,spring study,,,,,,
Thanks Kevin ✌️ trying to break this down as much as possible so everyone has the information thanks for watching
I like it interesting
@@kevinbreaker2683 yes I'm finding its very similar and also very different
Awesome video tutorial bro, good info
@@leoncottrill3254 Thanks Rc brother, just wanted to get a break down of it so I could get out there the difference in this and the Trx4
the body on the hb1001 is nicer, my opinion, like the badlands trim or something, little more square fenders ;)
if you go to trx4, sell this stuff just from the box: radio, motor&esc, wheels, steering servo andeven just the whole gearbox, you`ll get some 200 to 250 bucks to buy upgraded parts ;)
I agree I think this one has a better look to it as well. I would also agree this rig is a great value for what you get here.
Awesome thanks for the time
@@jackawaki Your Welcome & Thanks for watching
I built it back in 2016 and its never let me down. I bet most of my parts could work on. Its good deal if your getting it for your child to learn on it,
@@sirchirpalot Even for anyone I've went pretty deep in on this one I would choose this over the trx4 if scale was my thing and I were considering the sport as my purchase. So far main difference has been outside portal gears for this price its a no Brainer to me.
Same thing with the austar 1/18 and the trx4m. Some parts fit, some don’t. Facebook groups help with specifically what works and what needs modding. These were inspired. And please fix the smoke alarm beep 😂. I have several of these including the r1011 new version.
@@Sparroh I really don't do FB groups because of the negativity I prefer to do research and try and figure most out that I can on my own. FB is last resort for me its just not worth the hassle and crap attitudes you get in those groups. Alarm is fixed hilarious how that bothers so many people 🤣 Thanks for watching
@@RcDungeon The Austar ax8560 1/18 group is very laid back.
@@Hutch_Davenport I don't really get into the mini stuff much honestly or FB groups. Thanks for the info I really appreciate that. I may stop in and poke around some sometime 👍
Similar but no the same... for the price it's a good option 👌😉
Yes very good option I would say for the price it's a steal IMO
The trx4 Bronco is 500 bucks! If the body is as nice on the HBT as the trx4 and you like the new Bronco styling, then it's a great deal. If it sold in the U.S. it would be 350 easy. Nice job!
@@staysmallrc Thanks StaySmall, yes I just was comparing it to the sport mainly because its the same wheelbase as the Sport. But yes the body is very nice on this HB toys model very nicely scaled as far as lexan goes. It's very odd so many similarities but also in comparison to the Trx4 2021 Bronco lots of difference as well. I'm working on the axle video now I've found that some parts off the Trx4 models to actually work on this model. When I get it edited I'll get it up ASAP.
@RcDungeon Very cool. Yeah, I love the high trail brown 70s Ford, chrome roll bar, but that's 700 bucks to drive correct, and that's a shame. I haven't paid over $349 for a truck yet. All the upgrades get me to $5-550 pretty quick!
@@staysmallrc yes the High Trails are way over priced to me. I would never spend almost 700 for a lexan bodied truck, for less you can buy a really nice scale leafed Rc4wd rig and if you want more performance you could simply link it and still be around same price but with a super nice scale rig but that's my opinion. I loved my Ford high trail once I lowered it down on some 4.75 tires. I traded into that high trail on my channel If have never paid close to 700 for it though. I will say that was my favorite Trx4 I've ever owned out of all of the renditions they offer.
Great to see comparison between the two. When swapping the wheel hex look at going a touch longer to give a wider stance as we find on yhe hb1001 a little narrow which makes it tippy for side roll. Tr4 diff cover fits as we put brass one on ours. Keep up the great work 👍
@@DaddyDaughterRC-sw2zb Yes, mainly found the difference is in the portal part of the axles. I broke that down in the axle video I did for this model. Thanks for watching and thanks for the info as well. I've swapped over to aluminum hex once I figure out my wheels and tires I'll figure out what wheel hub and or offset I want, I kinda like the tire tuck on this little more scale accurate.
For me, trx4 inner and outer portal axles, and front c-hubs fit: ruclips.net/video/belD642crxg/видео.html
Some cheap trx4 lifts also fit: ruclips.net/video/xedikj6VnpQ/видео.html
Some trx4 skid plates also fit: ruclips.net/video/zB-uVVrp3cY/видео.html
Tried aluminum motor mount for the trx4 but that didn't fit. Instead, just used some electrical tape to fix the motor wobble issue.
Yah I got the c bubs to work, my trx4 has completely different portal housing so not sure how that worked for ya? Even the hex and stub axle location is different on my HB. Maybe difference in HB models possibly? I know you can swap literally everything to a Trx4 portal housing though over and it'll work.
Trx4 Bronco is 324mm wheelbase.
@@mikiejheyhey This one is same as the sport so that means the bodies are different then, thanks for posting this info 👍 and watching 👀
Thanks again for your comparison and tips that i saw in your other videos . They have been really helpful :-) .
Does anybody know which protocol the receiver is? frsky/flysky/futaba/ etc. I am noticing throttle delay when i give gas ,which basically means that there is some sort of expo programmed into the hand sender . If i could change the radio and keep the receiver with the light connectors that would be great .
Your very welcome, I noticed this delay as well, not as noticeable with a 2n1 1800 SE in it. I'm not sure what they used for the programming of the receiver. Hopefully someone on here might now as well. I'm actually curious if its whatever T word uses as well maybe. Once I figure out the wiring for the lights I'll be swapping all that out. Thanks for watching and commenting 🙂
@@RcDungeon Agreed, I love the 2n1 1800se in the model . You read my mind with the lighting and receiver 😎👍
I just want to enquire With this hb1001 chassis can fit for lc80, Cherokee or pajero 1/10?
@@stunningearths3942 Sure I can't see why those couldn't be adapted onto this
Has anyone found what metal hexes work for the hb yet? I have one coming and want to get those awhile.
Yes sir I have redcat gen8 are directly swap over also with some small shims Rc4wd K44 hex will work as well
@@RcDungeon Awesome thank you! I guess sizing will depend on my new wheels? I ordered some aliexpress 5.6 and 7mm ones that looked close, but will get the ones you posted as well
@@Adalwolf17 I had some standard black hexes and drilled out the middle (6mm) to fit . I can also confirm that the Injora motor mount Does not fit..
@rcflightadventure7282 Thank you for thr info! Sucks the motor mount doesn't work dang!!! Hoping HB comes up with some kind of aluminum one maybe then. So far all my plastic stuffs been great
If you wanted to convert some of that speed to torque what would you do? I am going to crawl mostly and the low gear is still faster than I like. Would you recommend transmission gears, pinion/spur or under drive gears in the axles? I would do the under drive gears with the front being gears to go faster to simulate over/under gearing people do for rock crawlers.
If your just looking to drop speed cheapest option would be pinion gear change.
@@RcDungeon thanks!
@@Hutch_Davenport Your welcome