Is the side bezel artwork for each game (that doesn't already fill the full 4:3 screen) included with the arcade/console packsl files you get off the archive site? Or do you manually have to scrape the bezel artwork afterwards? For example, does it already come with Ms. Pacman side bezel artwork since that game is vertical and would have black bars on the sides.
It's already included, all the artwork for each game will load on the sides while you're playing the game since most are 4:3 this display is 16:9 I believe
Great video! I have my pc plugged in to the new 5.71 sams club but cant get the control panel to register. Im thinking of adding awesome sauce but not sure how or if i want to downgrade the firmware.
You have turn on OTG mode in the settings on the arcade first, once OTG mode is on change the input on the display to the HDMI for your PC and then boot a fighter game or something up on steam and then you should have use of the control deck once the game is loaded
You can also stream games wirelessly over your home network but you need the AtGames application on your PC. It can be found on their website to download for windows, it basically does the same thing just over wifi without the HDMI connection
Thanks very much for this! For arcade titles that utilize the trackball or spinner, will the trackball and spinner automatically work? Or do you have to do other configurations elsewhere to get them to work?
from my experience games that utilize the track balls and spinners automatically work, for example Golden Tee or Centipede just work automatically with the trackball or arkanoid works with the spinners right from the install. if there are any issues this runs retroarch behind the scenes so you can get into all of the keybindings and set what you want to which buttons
@@vpx_pinball_mayhem yeah everything is saved internally on the flash drive even after you power off and power on the arcade all the high scores should still be saved
Yes it does, And if you leave it on the kiosk it will actually perform some sort of attract mode and it will cycle through the previews of each game in the library
@@TacticalDingus I don't think you're understanding "instant". Whenever I scroll on builds, it will have a microsecond of black screen. It takes away from the scrolling. Look up pandora boxes, you will know what I mean. No black screen in between video previews.
@@jackipieggif you're not satisfied with side loading a front end you can just plug a Pandora's box into the cabinet itself and use the OTG for the controls
Do you know how to do this on the newer ones that start with the 5.71 UI? HA8802 model with 10940_A21 starting firmware that looks like the 5.71 UI. I can’t figure out how or if you can get to 5.68 on these
Someone of onesauce said I need to put USB in before turning on the machine so going to try this. Also I wasn't sure if file name needed to be "ha8800_update" or "ha8000_update.img" so going to troubleshoot both. Some reddit also said ha8802 might work so will see if any of the 4 work
Renaming to "ha8802_update" without the .img on the end worked, not sure if thats common knowledge but previous video had the .img so it wasn't finding the file. Thanks!
Every time I try and join the Facebook group it says I can’t because it’s private. I click the link in the description and no luck. Any suggestions on how to join the group?
Hmmm I'm not sure, try not the link but actually search for awesome sauce on Facebook and see if that's any different. It is a private group but it should at least give you and option to join it. Make sure you answer the questions when you request to join
@@dustinmeyer2633 click the Google drive link and request access to that instead, you technically don't NEED to be in the Facebook group to be able to build your drive all though it's recommended
It may take a day or so for someone to accept your request into the Google drive, as far as the Facebook group just make sure you fill out the questions correctly when applying to the group and agree to the terms
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Is the side bezel artwork for each game (that doesn't already fill the full 4:3 screen) included with the arcade/console packsl files you get off the archive site? Or do you manually have to scrape the bezel artwork afterwards? For example, does it already come with Ms. Pacman side bezel artwork since that game is vertical and would have black bars on the sides.
It's already included, all the artwork for each game will load on the sides while you're playing the game since most are 4:3 this display is 16:9 I believe
Great video! I have my pc plugged in to the new 5.71 sams club but cant get the control panel to register. Im thinking of adding awesome sauce but not sure how or if i want to downgrade the firmware.
You have turn on OTG mode in the settings on the arcade first, once OTG mode is on change the input on the display to the HDMI for your PC and then boot a fighter game or something up on steam and then you should have use of the control deck once the game is loaded
You can also stream games wirelessly over your home network but you need the AtGames application on your PC. It can be found on their website to download for windows, it basically does the same thing just over wifi without the HDMI connection
Thanks very much for this! For arcade titles that utilize the trackball or spinner, will the trackball and spinner automatically work? Or do you have to do other configurations elsewhere to get them to work?
from my experience games that utilize the track balls and spinners automatically work, for example Golden Tee or Centipede just work automatically with the trackball or arkanoid works with the spinners right from the install. if there are any issues this runs retroarch behind the scenes so you can get into all of the keybindings and set what you want to which buttons
Are high scores for arcade games saved using onesauce? Is there a certain way to exit out of the games so your scores are saved?
@@vpx_pinball_mayhem yeah everything is saved internally on the flash drive even after you power off and power on the arcade all the high scores should still be saved
Does it have instant video preview without any black screens in between switching?
Similar to pandora boxes.
Yes it does, And if you leave it on the kiosk it will actually perform some sort of attract mode and it will cycle through the previews of each game in the library
@@TacticalDingus
I don't think you're understanding "instant". Whenever I scroll on builds, it will have a microsecond of black screen. It takes away from the scrolling. Look up pandora boxes, you will know what I mean. No black screen in between video previews.
Idk man here you can check the performance go to about 13:20 in the video @@jackipiegg
ruclips.net/video/ZQ54O9ZE7bc/видео.htmlsi=4VzagIkxaz9edb-h
@@jackipieggif you're not satisfied with side loading a front end you can just plug a Pandora's box into the cabinet itself and use the OTG for the controls
Do you know how to do this on the newer ones that start with the 5.71 UI? HA8802 model with 10940_A21 starting firmware that looks like the 5.71 UI. I can’t figure out how or if you can get to 5.68 on these
I have a video that explains how to get the 5.68 firmware on my channel, I also have the DL link for the firmware in the description of that video
With the HA8802 when I put in the usb it doesn’t read it as a firmware update. It just says it’s mounted. Any ideas on this?
Someone of onesauce said I need to put USB in before turning on the machine so going to try this. Also I wasn't sure if file name needed to be "ha8800_update" or "ha8000_update.img" so going to troubleshoot both. Some reddit also said ha8802 might work so will see if any of the 4 work
ruclips.net/video/hob68uceOo0/видео.htmlsi=bVzaAzY5XOKdAR_m
Renaming to "ha8802_update" without the .img on the end worked, not sure if thats common knowledge but previous video had the .img so it wasn't finding the file. Thanks!
Every time I try and join the Facebook group it says I can’t because it’s private. I click the link in the description and no luck. Any suggestions on how to join the group?
Hmmm I'm not sure, try not the link but actually search for awesome sauce on Facebook and see if that's any different. It is a private group but it should at least give you and option to join it. Make sure you answer the questions when you request to join
@@TacticalDingus yeah I did that many days ago and I don’t know if they didn’t approve my request to join or what.
@@dustinmeyer2633 click the Google drive link and request access to that instead, you technically don't NEED to be in the Facebook group to be able to build your drive all though it's recommended
@@TacticalDingus so I requested access to the Google drive and still haven't been given access. How long does it generally take to get access?
@@dustinmeyer2633 usually not too long, id head to the Facebook group and just mention to one of the admins and they will get you in
Hello,
I try to connect on facebook and google drive, when I make the access request, I have no return?
thank you
Je ne reçois pas de Mail suite à la demande d'accès ?
It may take a day or so for someone to accept your request into the Google drive, as far as the Facebook group just make sure you fill out the questions correctly when applying to the group and agree to the terms