How to fix the boot release switch on a Hyundai Coupe / Tuscani Tiburon gen 3 3.5

Поделиться
HTML-код
  • Опубликовано: 16 окт 2024

Комментарии • 48

  • @seanh9037
    @seanh9037 2 года назад +1

    Had to take a moment to write a personal 'thank you' in the comments. This fix worked like a charm, and saved me the annoyance of always using my key to open the trunk, not to mention the money it would have cost to get it fixed by some shop.

  • @seanpooley1396
    @seanpooley1396 2 года назад

    This worked for me on my 2003 hyundai coupe, thanks so much for sharing this tip!

  • @abelsalazar5069
    @abelsalazar5069 2 года назад

    Wow it worked I was just inherited a 2006 Tiburon and the trunk release on the door sometimes worked, i did the cleaning and it works on command 👍👍

  • @frankaltamirano4256
    @frankaltamirano4256 3 года назад

    Mate you are a life saver! had the same problem where the switch stopped working out of the blue. Took it to the mechanics, and they said I needed a new actuator and it was gonna cost me $700 and there is only one left in Australia.I told em I'll think about it. Starting looking online for pricing on actuators and if anyone else had this problem, and I found your video. Didn't think it would work, but I thought I would give it a try, better then having to pay $700. To my suprise, it worked like a charm!! thank you! It was a reallllll pain taking out that switch, it was in solid that i almost gave up, but glad i didnt! Thanks again!

    • @foehammer2003
      @foehammer2003  3 года назад +1

      Ah mate, that's amazing!! Exactly why I do these videos when I can, glad it sorted your problem out and saved you a good chunk of change! 👍

  • @alexhughes7857
    @alexhughes7857 2 года назад

    Came back to this video but it helped so much the owners before me said it never worked I watched this video and it fixed it

  • @julinvbn
    @julinvbn 2 года назад

    Damn, I thought it would be a pain in the ass to fix it but I just walked to my car and fixed it in 3 minutes! Works perfectly again. Great video

  • @Zilz
    @Zilz 5 лет назад

    You're a legend! Stumbled on this video searching for a replacement switch, just tried it and works like a charm again!

  • @oscarrivera1535
    @oscarrivera1535 4 года назад

    Thanks mate you saved me $130 I would’ve had to pay the dealership. You’re the real MVP👏🏼👏🏼👏🏼

  • @edgarg7389
    @edgarg7389 4 года назад

    Recently got a tiburon and wow you saved me money and time since it was such an easy fix! Thank you

    • @foehammer2003
      @foehammer2003  4 года назад

      Awesome? Glad it helped! Enjoy your Tib! Amazing cars

  • @gerrystubbs8328
    @gerrystubbs8328 5 лет назад

    Thanks Mate....just bought a nice coupe with a couple of minor niggles, but thanks to your video I've cured the boot release!...Thank you.

  • @SirPhilosophiae
    @SirPhilosophiae 2 года назад

    Thank you from Spain. You helped me a lot ! Problem solved :D

  • @leemussett3280
    @leemussett3280 3 года назад

    Had been bugging me for weeks top tip fella gatt gun would sort the dogs

  • @xXClassifiediLINKXx
    @xXClassifiediLINKXx 4 года назад

    Well your a life saver.. Done it to my 07 gk fl2, works well, though nearly snapped the clip bridge on the outer casing.. Thanks champ..

    • @foehammer2003
      @foehammer2003  3 года назад +1

      Nice one on getting it working again!! Yeah that clip doesn't look the strongest that's for sure!

    • @xXClassifiediLINKXx
      @xXClassifiediLINKXx 3 года назад

      @@foehammer2003 legit, yet to do the sun roof control panel too..

  • @dallaswatson2615
    @dallaswatson2615 4 года назад

    Thank you, it worked for me, actually scared me that it worked. Thought someone was tryna open my trunk.

    • @foehammer2003
      @foehammer2003  4 года назад +1

      Haha I had a similar experience, I thought to myself is that actually my boot popping!? Haha

  • @anthonymarquez9834
    @anthonymarquez9834 4 года назад

    Did this on my 06 tibby gt, worked perfectly! Thank you!

    • @foehammer2003
      @foehammer2003  4 года назад +1

      Amazing :) glad it helped you! I miss mine, had an 06 too, beautiful car!!

  • @zlackbiro
    @zlackbiro 18 дней назад

    The best way to inspect the circuit is by shorting those two wires for a second. Mine switch works, but there is no power to the actuator back. I inspected the harnesses, all good. The problem may be in a relay under the hood. I need to find where it is.

  • @raymiemac71
    @raymiemac71 4 года назад

    Brilliant video Dude.. Cheers.

    • @foehammer2003
      @foehammer2003  4 года назад

      Glad you liked it! Hope it helped! :)

  • @laszlovadkerti2347
    @laszlovadkerti2347 4 года назад

    Hi, It worked for me! Thanks

  • @TitanSomething
    @TitanSomething 5 лет назад

    Your an absolute legend thank you!

  • @andreabrooklyn6872
    @andreabrooklyn6872 3 года назад

    Hello, I hope you are doing great! I have a Hyundai Tiburon 2007 and the boot release seems to work because I can heart it send a signal or whatever it is, but it just doesn't open and I can still open it with the Key. The point is that I would like to use the boot release as well instead of always opening it with the Key. Do you think it's the latch in the trunck?

    • @foehammer2003
      @foehammer2003  3 года назад +1

      Hi! Soz for delay. So before I did the trick in this video whenever I tried the boot release I could hear the motor working, but it was a case of not enough current was getting through, hence what I tried in the video. Personally I'd try that before looking to change the actual boot latch mechanism 😊 in any case I hope you get it working!!

    • @andreabrooklyn6872
      @andreabrooklyn6872 3 года назад

      @@foehammer2003 Thanks a lot! 🤩

  • @raymiemac71
    @raymiemac71 5 лет назад

    Cheers m8. helped a treat.

  • @xXClassifiediLINKXx
    @xXClassifiediLINKXx 4 года назад

    Apparently very similar issue with sunroof controls, so thats gonna be a fun one 😅😂😂

    • @foehammer2003
      @foehammer2003  3 года назад

      Once you get to the switch I would of thought it's the same principle though, let me know how you get on, my sunroof was the same!

  • @sergio.sabater
    @sergio.sabater 2 года назад

    So actually to open the trunk both terminals have to make contact with each other, right?

    • @foehammer2003
      @foehammer2003  2 года назад +1

      Yeah you got it, it's just removing the corrosion on the contact to complete the circuit

    • @sergio.sabater
      @sergio.sabater 2 года назад

      @@foehammer2003 Thank you very much dude! You helped me solve a problem where a workshop wanted to charge me more than $50!!!.

  • @fredpalacios507
    @fredpalacios507 3 года назад

    amazing! thank you

  • @Sajikibara
    @Sajikibara 5 лет назад

    Thanks!

  • @ibrarmohammed1679
    @ibrarmohammed1679 Год назад

    For any uk viewers: be careful. Plastic here is a lot more brittle due to the temperature so ive just easily split the trunk releae housing trying to pry the top of the button off...

    • @ibrarmohammed1679
      @ibrarmohammed1679 Год назад

      Update: after literally snapping 80% of the housing: i got it off and cleaned it and it worked! But LISTEN BEFORE YOU DO THIS: he didnt explicitly say but there 2 clips top and bottom. Theyre very large, so put a lot of pressure with a long, thin and flat screwdriver there. And i used pliers to grab the housing, pull outwards but the door pocket will block you pulling it out so make sure to stretch that away a little so the actual housing can lift out. Then its plain sailing from there

  • @Exrawx
    @Exrawx 5 лет назад

    Thabks you!!

  • @aaronbouquet644
    @aaronbouquet644 4 года назад

    I am one of those unlucky few who has not had luck with this. I took this as a first step, then jumped the wires directly to bypass the switch. Solenoid pops, hatch does not open. So, I leave the jumper on the switch, try jostling the hatch up and down, nothing. Needless to say, the key does not work. I have a brake light out and its causing me to fail inspection. I took some video down in the area from the rear access point in the rear boot. Nothing unusual looking to my eye. Thought I might have to take the entire bumper off and just go at the lock itself from the bottom and release the whole kit. You cant take the rear bumper off without removing the tires without a right hand angle adapter for a drill. Even a stumpy screw driver wont fit between the wheel and the bumper where a screw just had to be located as opposed to underneath it 2 inches down. Freaking cars man. I swear

  • @1998gst4611
    @1998gst4611 5 лет назад

    Why do you call it a boot release, its a trunk hatch release? In the U.S. thats what we call that i guess you guise call it boot release in the UK which i find that odd.

    • @foehammer2003
      @foehammer2003  5 лет назад

      If we called it a trunk in the UK we'd expect to find a wooden box. You guys call trousers pants, pants to us is boxer shorts or underwear. Fanny to us a ladies private parts where it's an arse to you. Go figure haha!

    • @1998gst4611
      @1998gst4611 5 лет назад +1

      @@foehammer2003 You said arse you mean ass, right?

  • @satvirdhillon5133
    @satvirdhillon5133 6 лет назад

    I watched

  • @MegredyPhotoStudio
    @MegredyPhotoStudio 6 лет назад +2

    bloody dogs :))))