Sirjii thank you very much ,bohot badiya samjhaya he sirjii aapne sare concepts clear kar diye joo college me bhi samajh nai atte tha waaah sirjii thank you once again ❤️
Great job Your ans is correct keep it up Watch the other part of the drawing too Electrical Drawing all part Part 1 ruclips.net/video/IblZ2QScDJ4/видео.html Part 2 ruclips.net/video/Df8o0290ZhA/видео.html Part 3 ruclips.net/video/WA-Vep-w6D8/видео.html Part 4 ruclips.net/video/YEfRQRYIym4/видео.html Part 5 ruclips.net/video/WtB2VN28GR4/видео.html Part 6 ruclips.net/video/X6MZIwCfBVc/видео.html Part 7 ruclips.net/video/KkhdTsEzmls/видео.html Part 8 ruclips.net/video/1B5XAmlmcSg/видео.html Part 9 ruclips.net/video/DKbQ32ThKM8/видео.html Part 10 ruclips.net/video/Hc3upvIw-qw/видео.html
@@ElectricalTechnician Sir you are doing a great job...These are the kind of videos I was searching for 10 years ago when so many Electrical channels of quality stuff was not there on RUclips (or maybe I never found them)...These videos mean a lot of help to me. Keep up your Good work !!
Sir video ka last diagram me push button on hone se dono Matlab CR and Motor on rehega and stop button push karne se dono band hoga na.. please confirm..
@@ElectricalTechnician please provide a video on 132 kv control and relay panel.. I have watched 8 part of your videos great explanation in every video
Take icecream ice (carbon ice) and hand sanitizer mix the glause and water pump copper pipe put in same cantainer and a fan on fan behind the copper pipe in front a plate water will flow on plate.
If PB2 is OFF and also PB1 is OFF then indication lamp will glow. If PB2 is OFF and PB1 is ON then indication lamp will not glow.If PB2 is ON and PB1 is OFF then indication lamp will glow.If PB2 is ON and PB1 is also ON then indication lamp will glow.
I will pay money nd also i can give time i want to join where mostly equipment available like transformer, ups, batteries, motor, breaker, relays, nd testing equipment
@4:35 min u said stop btton button se Off kyun nahi hota , holding circuit nahi samjha , i am mech engg , dont know much about electrical , pls explain
Jab hum start push button ko press karte hai kisi Contactor ko on karne kae liye aur us start push button ko release kar dete hai tab bhi Contactor on rahta hai To jis circuit kae wajah sae wo Contactor on rahta hai start push button ko release karne kae baad bhi use holding circuit bolte hai
@@ElectricalTechnician Got it thanx Sir aap Electrical circuit software training mein meri help karenge ? on commercial basis My contcact No +9322909922
When PB2 Off and PB1 Off = LT1 Off When PB2 Off and PB1 On = LT1 Off When PB2 On and PB1 Off = LT1 On When PB2 On and PB1 On = LT1 On If Off means NO(normally open) and On means NC(normally closed)
First channel i found where i can clear all my doubts
Dont forget to subscribe the channel
Electrical Drawing ka part 6 upload kar diya gaya hai u can watch that Video too
@@ElectricalTechnician yes sure...i have watched
1)Pb1+Pb2 off (cr1-nc) on
2)Pb1 on pb2 off (çr1-no) off
3)pb1 off pb1 on (CR2 -nc) on
4) pb1+pb2 on (Cr2-nc) on
I am your big fan
Right 🎉🎉🎉
Ek dam super class ji ,hum apse drawing Sikh jayge ,pradam guru dev ji
Very Good explanation for beginners
Bahut hi badhiya video hai sar ji aapka mere ko bahut kuchh sikhane Ko Mila aapke is video mein
Koi bhi aise samjhata nahin hai
Very knowledgeable video, thank you so much sir ji
Sirjii thank you very much ,bohot badiya samjhaya he sirjii aapne sare concepts clear kar diye joo college me bhi samajh nai atte tha waaah sirjii thank you once again ❤️
Sir aap ka ye video mujhe bahut achha laga
Very informative ❤
Thanks.sir bhut hi achhi se samjhate hai...
Thank you so much for the video
Precious information
Kamal ka droning hai sir gajab sikhay
Aaj ek aur drawing ka video upload kar dunga isse bhi best ☺️ dekh lena
@@ElectricalTechnician
Yes sir
I'm waiting for you drawing video
Thanks sir....keep making videos like this
Thanks for the love and support
Please subscribe the channel too
Very informative video 🙏🙏🙏
Systematically represented 🙏🙏🙏👍
On off on on .. thank you good video sir
Great... 🙏
PB2 off, PB1 off= LT1 ON
PB2 off, PB1 on= LT1 OFF
PB2 on, PB1 off= LT1 ON
PB2 on, PB1 on= LT1ON
Great job
Your ans is correct keep it up
Watch the other part of the drawing too
Electrical Drawing all part
Part 1
ruclips.net/video/IblZ2QScDJ4/видео.html
Part 2
ruclips.net/video/Df8o0290ZhA/видео.html
Part 3
ruclips.net/video/WA-Vep-w6D8/видео.html
Part 4
ruclips.net/video/YEfRQRYIym4/видео.html
Part 5
ruclips.net/video/WtB2VN28GR4/видео.html
Part 6
ruclips.net/video/X6MZIwCfBVc/видео.html
Part 7
ruclips.net/video/KkhdTsEzmls/видео.html
Part 8
ruclips.net/video/1B5XAmlmcSg/видео.html
Part 9
ruclips.net/video/DKbQ32ThKM8/видео.html
Part 10
ruclips.net/video/Hc3upvIw-qw/видео.html
@@ElectricalTechnician Sir you are doing a great job...These are the kind of videos I was searching for 10 years ago when so many Electrical channels of quality stuff was not there on RUclips (or maybe I never found them)...These videos mean a lot of help to me.
Keep up your Good work !!
Correct ....
PB2 OFF, PB1 OFF= LT1 ON
PB2 OFF, PB1 ON= LT1 OFF
PB2 ON, PB1 OFF= LT1 ON
PB2 ON, PB1 ON= LT1 ON
Super sir,, practical also will be more usefull
Aap Accha samjhaya hi
Great information
Thank you
Your teaching way is amazing
On, off, on & on.
You are doing very good please keep it up
I am learning electrical drawing in the easiest way. Thanks sir.
kya teaching hai .very good .keeo it up
Thanks dear frd
Subscribe the channel
Sir please home wiring ki training par videos bnain@@ElectricalTechnician
This seemed to be difficult you have made it very easy Thank You
Im from Pakistan love you sir
Thank you sir..I had go through it..and I did right answer.. excellent explain..
Sir video ka last diagram me push button on hone se dono Matlab CR and Motor on rehega and stop button push karne se dono band hoga na.. please confirm..
Nice explanation sir 🙏
Thanks for making video..
Very nice sir,thank you,
Very nice sir
Thank you so much for this nice presentation
You are a great teacher
Subscribe the channel
Sir Aapke samjhane Ka tarika bahut achcha hai , sub start par am video banaiye
Wow sir great knowledge platform.. I am a protection engineer in uttarakhand state govt. This is very usefull for me.
Watch the other part of the electrical drawings you will like that all video's too
@@ElectricalTechnician please provide a video on 132 kv control and relay panel.. I have watched 8 part of your videos great explanation in every video
Great job
Very nice information
Thank you sir nyc video
Very nice..
Ans1-ON
Ans2-Off
Ans3-ON
Ans4-ON
Thank you so much..
Good information
Nice 👍👍👍
Thanq so much sir,
Please make part 3 and so on ....
thanks for liking the video
Soon part three of Electrical drawing will be uploaded
Excellent
Good Practice
Thank u so much sir
Thanks sir
❤❤❤❤
Nice video
Good
answer 1,2 - off; 3,4-on
Anna very good
thank you so much
superb
1.ON 2.OFF 3.ON 4.ON
😊✔️me also
PB 2 OFF PB1 OFF = LT1 ON
PB2 OFF PB1 ON = LT1 OFF
PB2 ON PB1 OFF = LT1 ON
I am satisfied to mr. P.P.Nirala
Very nice
Nice sir
Thanks sir
But pls send the more basic about identifying electrical components name and function of each
Thanks
Control diagram pe video bnaye sir
good video
Please subscribe the channel
thanks brother
Take icecream ice (carbon ice) and hand sanitizer mix the glause and water pump copper pipe put in same cantainer and a fan on fan behind the copper pipe in front a plate water will flow on plate.
Sir ek video 3phas 3 terminal motor ki bhi bna dijiye please
Thank you so much " dostoo"
good
1. ON, 2. Off 3. ON 4. ON
Sir JYOTI KA HT BREKER KA DRAWING KA VIDEO BNAO ❤❤❤
All on
No wrong ans
2press lamp continued
Bhai schematic diagram dekh kar bill of material kaise banate please video banao it's emergency for me
Only PB1 On and PB 2 off m indication off rahega or baki ki teen condition m Indication ON rahega sir....
When PB2 OFF +PB1 OFF= LIGHT ON
When PB2 OFF+PB1 ON= LIGHT OFF
When PB2 ON+PB1 OFF=LIGHT ON
When PB2 ON+PB1 ON=LIGHT OFF
When PB2 ON+PB1 ON=LIGHT OFF
Fire system joky pump wala ele drawing ki jankari dijiye
PB1 PB2 of ya on doughnuts me hi on hoga lT1 on hoga
(1) on (2) off (3) on (4) on
Hlw sir overload and overload relay ak hi component h ya alg alg h
If PB2 is on light will indicate, light is completely depending on PB2 "ON" condition
Main pcc panel auto-manual-independend kay diagram kay bare may bato.
1= on, 2= off, 3= on, 4= on
Part three banao sir
Bahut jald banaoga frd
Sir electrical drawing ka part -3 banao
Ya sure bahut jald banaoge
If PB2 is OFF and also PB1 is OFF then indication lamp will glow.
If PB2 is OFF and PB1 is ON then indication lamp will not glow.If PB2 is ON and PB1 is OFF then indication lamp will glow.If PB2 is ON and PB1 is also ON then indication lamp will glow.
PB1 OFF PB2 OFF=ON
PB1ON PB2OFF=OFF
PB2ON PB1OFF=ON
PB2ON PB2ON=ON 18:30
Sir Do you run coaching or any classes.. I want to join ur classes.
Sorry i don't have any coching classes
@@ElectricalTechnician it's ok sir but sir can u guide where i learn practical or therotical any institutions in ur mind
I will pay money nd also i can give time i want to join where mostly equipment available like transformer, ups, batteries, motor, breaker, relays, nd testing equipment
Pb1 and pb2 push then light on
@4:35 min u said stop btton button se Off kyun nahi hota , holding circuit nahi samjha , i am mech engg , dont know much about electrical , pls explain
Jab hum start push button ko press karte hai kisi Contactor ko on karne kae liye aur us start push button ko release kar dete hai tab bhi Contactor on rahta hai
To jis circuit kae wajah sae wo Contactor on rahta hai start push button ko release karne kae baad bhi use holding circuit bolte hai
Is video ko dekho ismai holding circuit kae bare mai bataya hu
ruclips.net/video/IblZ2QScDJ4/видео.html
@@ElectricalTechnician Got it thanx
Sir aap Electrical circuit software training mein meri help karenge ? on commercial basis
My contcact No +9322909922
1.LT1 ON
2.LT1 OFF
3.LT1 ON
4.LT1 ON
Bro i have some doubt in 132kv transmission line for Underground cable line and 1000sq mm how much amp capable ..?
It will take around 800 Amp in Underground
1ans on 2nd off 3rd on 4th on
sir please explain last question with answer
Plc aur really and conductor diagrams share kijiye
No - 1 on and no. 2 off and no. 3 on and no. 4 on
1-on
2-off
3-on
4-on
When PB2 Off and PB1 Off = LT1 Off
When PB2 Off and PB1 On = LT1 Off
When PB2 On and PB1 Off = LT1 On
When PB2 On and PB1 On = LT1 On
If Off means NO(normally open) and On means NC(normally closed)
On off on on