How to maintain, clean and oil your Embroidery Machine

Поделиться
HTML-код
  • Опубликовано: 7 ноя 2024

Комментарии • 70

  • @marksavage8114
    @marksavage8114 10 месяцев назад +5

    Our machine started squeaking sound needed to be oiled and I didn't know how. This video showed me exactly how to oil the machine..dankie aunty brother machine magician

    • @LakesideQuiltmakingArts
      @LakesideQuiltmakingArts 4 месяца назад

      I didn't see the oiling, just the cleaning of the inside with spirits. Did you clean with spirits, too, and then re-oil?

  • @fanboy1116
    @fanboy1116 3 года назад +8

    My Babylock flourish 2 was making the most horrible rattling and squeaking sound. I literally tried EVERYTHING and was ready to take it to the shop. It's only 7 months old. Followed this tutorial and my machine is humming along nicely. Thank you so much!!!!!

  • @debraannmariee
    @debraannmariee 4 года назад +2

    So helpful! Was wondering why my machine was squeaking so badly and it was the bobbin needing oiling! The manual or any info online doesn't have anything specific to embroidery machines so I'm grateful to have found your video. Thank you!

  • @dorotheawiltshire6511
    @dorotheawiltshire6511 6 лет назад +6

    Thank you, for your prompt reply.I already tried that. In the meantime someone on Facebook gave me the following tip. To loosen the screws on the frame, and try again. I undid it and started againI and presto it worked. Just in case it happens to anyone else.

  • @heathervestal7087
    @heathervestal7087 5 лет назад +7

    Thank you so much for this video. You have helped so many people that didn't know how to do this. My old sewing machine was easy to clean. My newer one is a little more involved but this was just what I was looking for.

    • @annieliebenberg7693
      @annieliebenberg7693  5 лет назад +1

      Hi Heather, I am glad I could help - English is not my first language and I was afraid nobody would understand me.

    • @heathervestal7087
      @heathervestal7087 5 лет назад

      @@annieliebenberg7693 Your English and instructions are very clear. I followed along with your video and my Brother SE425 is running like brand new. Happy New Year!

    • @annieliebenberg7693
      @annieliebenberg7693  5 лет назад +1

      Thanks @@heathervestal7087 - happy new year to you too!

    • @bruss87
      @bruss87 4 года назад

      @@annieliebenberg7693 no no I usually difficult to understand orale english, you are extremely professional and clear ti explain to maintetance machine and you have a super Brother machine ♥️

    • @HaripravasthiRaj
      @HaripravasthiRaj 3 года назад

      Useful video... Thank you🙏

  • @camf53
    @camf53 5 лет назад +8

    Thank you! This was very helpful! I don't have to wait on my husband to find the time to oil my machine anymore!

  • @TOBIAS-nn7vf
    @TOBIAS-nn7vf 5 лет назад +1

    Thanks for the tutorial! I love cleaning + oiling my vintage singer but didn't want to do any guesswork on this one because of the computerized parts. I will be bringing it to a technician though first because it has been sitting in my Aunt's house for a few years. Lovely Afrikaans accent by the way!

  • @jedediahgordon4064
    @jedediahgordon4064 5 лет назад +7

    what kind of oil do I use?

  • @reallifelove
    @reallifelove Год назад

    Thank you so much for this helpful tutorial! My question is - does this replace annual professional service for the machine? I'm having a hard time finding a service provider in my area, and would be very happy if I can just maintain the machine myself.

  • @donasew4it132
    @donasew4it132 Год назад +1

    Hi this was very helpful. But, do you have a tutorial on how to clean the actual embroidery unit that can be detached for regular sewing?

  • @janeelow911
    @janeelow911 6 лет назад +1

    This is wonderful. I have a question my embroidery arm was serviced but wasn't screwed together properly so the arm top doesn't fit flush have you ever taken it apart?

    • @annieliebenberg7693
      @annieliebenberg7693  6 лет назад +1

      Hi Jane, I have never take my embroidery arm apart - that I will leave to the technician. Take it back to the technician to fix as he did a poor job putting it back together.

    • @annieliebenberg7693
      @annieliebenberg7693  6 лет назад

      Yes, our technician does take it apart when he does a complete service. Take it back to your technician - he needs to
      fit it properly.

  • @mariangies
    @mariangies 4 года назад +1

    What's the name of the oil? Thanks do r the tutorial it's very helpful.

  • @pinhq9139
    @pinhq9139 7 лет назад +4

    thanks for the video, I am going to try this. is the spirits you're spraying the same as rubbing alcohol?

  • @Friths1
    @Friths1 7 лет назад +2

    Thank you, this really helped a lot, my machine was squaking badly.

  • @riccardoveiga8734
    @riccardoveiga8734 Год назад

    This was super helpful, dankie Tannie!

  • @rebwolfe2702
    @rebwolfe2702 20 дней назад

    Don’t forget to clean the embroidery unit! Clean where the hoop goes in, being careful! I use Methylated Spirits.

  • @bruss87
    @bruss87 4 года назад

    Thank you. I doesn't know of I can use thread for theeth! I have a Brother innovis 1800Q and 2y ago i have a problem whith safety device cause bad thread. My custom seller broke the basket bobbin and was terrify rumor. So I went to assistence center mese me and replace piece. Lately machine make a strange and metallic soft rumor, sometimes at medium-max fast, Is clear buy I never use oil cause on instruction I ready Is not necessary buy the assistence told me to lubricate on the magnet sometimes. What oil do you use? Thanks and congratulation for tutorial. Excuse me for bad english, I am italian! Kind regards!

  • @Miss-Laine
    @Miss-Laine 5 лет назад +1

    Good video. I was always afraid to open my machine... not anymore

  • @monicaacosta6098
    @monicaacosta6098 5 месяцев назад

    Thanks a lot for your help

  • @GameGirl-Color
    @GameGirl-Color 4 года назад +13

    You need to advise folks to turn the machine off first...

  • @Eblair3668
    @Eblair3668 7 месяцев назад

    My brother nq1700e keep showing check upper thread

  • @Dollyxannie
    @Dollyxannie 4 года назад

    what did she spray on the bobbin?

  • @carinabam5833
    @carinabam5833 5 лет назад +1

    how often must the V3 be oiled?

    • @annieliebenberg7693
      @annieliebenberg7693  5 лет назад +1

      Depends on how often you use it - if you haven't use it for a long time them it is preferable to oil it before you start embroider again.

  • @dorotheawiltshire6511
    @dorotheawiltshire6511 6 лет назад

    Hi Annie thanks for the video. I have a problem at the moment. My V5 doesn’t recognise the big frame. Any suggestions? Kind regards Jo

    • @annieliebenberg7693
      @annieliebenberg7693  6 лет назад +1

      Dorothea, Switch on your machine, Click on the page at the bottom left, go to page 5 and select the biggest hoop size - that will be 30cm x 18cm

    • @annieliebenberg7693
      @annieliebenberg7693  6 лет назад +1

      Dorothea, Switch on your machine and click on the page image at the bottom of the screen and go to Embroidery Frame display page and select the biggest frame by clicking on the arrow.

  • @samuelsam8339
    @samuelsam8339 Год назад +1

    I HAVE CLEANE MY NV 180 BUT IT STILL SHOW PREVEVNTIVE MAINTAINACE

  • @maysszeg7607
    @maysszeg7607 4 года назад

    How the heigh of the bobbine?

  • @iraidereis3408
    @iraidereis3408 Год назад

    Como mudar o painel da máquina pois não está mudando

  • @hyacinthrichardson9476
    @hyacinthrichardson9476 5 лет назад

    My embroidery arm is not moving when the screen is touched. Any advice?

  • @yvonneblackmon2879
    @yvonneblackmon2879 6 лет назад

    Bulb is out under my ellisimo gold. Any suggestions or do I need to take in?

    • @annieliebenberg7693
      @annieliebenberg7693  6 лет назад

      Hi Yvonne, Would gladly help but I do not know the Ellisimo Gold.

    • @annieliebenberg7693
      @annieliebenberg7693  6 лет назад

      I am not familiar with the Ellisimo Gold - would make a suggestion - take it in to the shop where you purchased it from and ask them to replace it for you and show you how to do it yourself next time.

  • @eastcoastkoverz
    @eastcoastkoverz 3 года назад +2

    The instructions on the PE800 says in BOLD DO NOT OIL MACHINES

    • @planetzrp1776
      @planetzrp1776 Год назад +1

      Yeah same reason mac tells you not to open the product. Sometimes i gotta clean it yourself

    • @JohnEastmanExAttyAtLaw
      @JohnEastmanExAttyAtLaw 28 дней назад

      @@planetzrp1776 exactly. tell me why do the maintenance men oil it and then charge you 275 for 20 minutes of work, LOL. they want to make money off you for the next 25 years. that is why the machine has a 25 year warranty. these machines are so easy to maintain. all they ever need is a little oil or to be cleaned with alcohol or spirits. the dust needs to be blown away as well. imagine paying brother 275 a year for service for the next 25 years, LOL.

  • @klanauklanau8475
    @klanauklanau8475 2 года назад

    Hello my machine does not break the thread but doesn't work. What can I do? Mechanics can not renovate. Help me please.

  • @MsHighpeaks
    @MsHighpeaks 6 лет назад +9

    That is so dangerous with the machine switch on!

  • @evelynagbasonu3096
    @evelynagbasonu3096 Год назад

    Thank you.

  • @heartforchrist7004
    @heartforchrist7004 Год назад

    Did she says spirits?

  • @Sabbox2
    @Sabbox2 5 лет назад

    Thank you

  • @maysszeg7607
    @maysszeg7607 4 года назад

    The thread is break a lot.where is the problem

  • @SewDivaCreationsLLC
    @SewDivaCreationsLLC 6 лет назад +3

    Brother really don't recommend oiling their embroidery machines, they advise you to take them to the authorized dealer to get them oiled

    • @annieliebenberg7693
      @annieliebenberg7693  6 лет назад +13

      Hi Ms Dwana, I am a Brother dealer and that is the first thing I train my customers. This is nonsense - customers need to know how to maintain their machines. These are the only 2 places you are allowed to oil. If you take it in for its yearly service, the technician takes apart the machine completely and give it a proper oil on all necessary components.

    • @SewDivaCreationsLLC
      @SewDivaCreationsLLC 6 лет назад +1

      Thank you for that information, i really appreciate it

    • @heathervestal7087
      @heathervestal7087 5 лет назад +2

      This is the same process they charge $45 for.

    • @traceedock8351
      @traceedock8351 4 года назад +2

      I was told the same thing when I purchased mine.

    • @bruss87
      @bruss87 4 года назад +1

      @@annieliebenberg7693 wow, now I am most dire when I Need an advice. Thank Annie ♥️

  • @maysszeg7607
    @maysszeg7607 4 года назад +1

    I did not recognize which wire I used to straighten the teeth

  • @اكلعلىاصوله
    @اكلعلىاصوله 3 года назад

    100000like 👍

  • @user-zr3gh8lj5y
    @user-zr3gh8lj5y 10 месяцев назад

    انا عربي ولا افهم الانجليزية

  • @heartgirl1980
    @heartgirl1980 2 года назад +1

    You really need to turn the machine off first it’s highly recommended …

  • @nottoday8998
    @nottoday8998 6 лет назад

    Baie dankie

  • @jeanpaternoster4393
    @jeanpaternoster4393 5 лет назад

    7

  • @gage.glidewell
    @gage.glidewell Год назад

    What kind of oil to use?

  • @donasew4it132
    @donasew4it132 Год назад

    Thank you